Human Inner Ear Model, 18x (Product Code: SLE/A/33) magnifies the tiny organs of hearing and balance about 18 times, turning structures only millimetres across in the skull into a model that a whole class can study. Opened sections reveal the saccule and utricle, and a median section of the cochlea shows its internal spiral. Audiology, ENT, physiology and advanced biology departments use it as an ear model for the anatomy lab in India, and it is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

The inner ear is hard to teach from diagrams because its canals curve in three planes. At this magnification a lecturer can trace the semicircular canals with a pointer, then move to the opened region to show where the saccule and utricle sit and how they relate to balance. The median cochlear section lets students follow the spiral turns and discuss how sound waves are converted into nerve signals.

Audiology and speech-and-hearing students often use the model before clinical postings to connect test results with anatomy, and physiology classes pair it with a whole-ear model to show where the inner ear lies. For a high school biology lab that needs one clear sense-organ model, the stand keeps it upright at the front of the room; turn it slowly so each group sees the opened side and the cochlear section in turn.

Manufacturer

This inner ear model is produced by Jain Scientific Equipments Private Limited, which operates as ScienceLab from Ambala in Haryana and supplies anatomy and science teaching equipment to buyers across India and international markets. Visit our company profile to learn how the company is organised.

Related Human Models

Combine the enlarged inner ear with these models for a complete sense-organ lesson:

• Human Inner Ear Model, 4x — a smaller-scale inner ear for bench work or where space is limited.
• Human Ear Model, 5 Parts — shows outer, middle and inner ear together so students can locate the inner ear.
• Human Ear Model — an alternative whole-ear model for general classes.
• Human Eye Model with Eyelids — completes a special-senses teaching set.

All ear, eye and other organ models are in our anatomy models category.

Frequently Asked Questions

How much is the inner ear enlarged?
About 18× life size, which is large enough for lecture-hall viewing.

Does the model show the inside of the cochlea?
Yes, it includes a median section of the cochlea so its internal turns can be seen.

Which balance organs are visible?
The superior semicircular canal and auricle are opened to show the saccule and utricle.

What space does it need?
It measures 24 × 18 × 33 cm and stands on its own stand with base, so a shelf or bench corner is enough for storage.

Does it include the outer and middle ear?
It is an inner ear model. For the full ear, add one of the whole-ear models listed above.

Can a test report or calibration certificate be supplied?
As a teaching model it has no measuring function; if your purchase process needs specific documents, please discuss them with us through the contact page.

Request a Quote

Ask for a quotation on the Human Inner Ear Model, 18x by messaging us on the contact page, or collect it in the enquiry cart with any other sense-organ models you need.

Last updated: 24 September 2026

Non Woven Face Mask (Product Code: SLE/MK/02) is a blue, 3-ply ear-loop mask made of non-woven fabric, used as everyday face protection in clinics, laboratories and school sick rooms. Each ply is specified at 25G, and the mask is listed with a bacterial filtration efficiency (BFE) of 99%, which suits buyers comparing mask grades. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India, in plain boxes of 50 pieces.

Specifications

What Is the Non Woven Face Mask Used For?

This blue non-woven mask is a routine barrier for the nose and mouth during patient contact, sample handling, microscopy sessions and bench cleaning. Non-woven fabric is made by bonding fibres rather than weaving them, which gives a light, breathable sheet; stacking three such plies adds depth to the barrier without making the mask heavy.

BFE is a laboratory measure of how much of a bacteria-laden aerosol the mask material holds back, so it describes the fabric rather than the fit on a face. To get the most from the mask, pinch it snugly over the nose, cover the chin fully and change it whenever it becomes damp. Boxes of 50 make it simple to issue a fresh mask to each person per session and to track stock.

What to Specify When Ordering

• Number of boxes (each box holds 50 masks)
• Colour: this item is blue; a green version is listed separately
• Whether neutral box packing suits your store or resale needs
• Delivery address and required date

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana. The company supplies this Non Woven Face Mask as a sourced consumable for hospitals, health centres, laboratories, schools and distributors, and quotes it alongside gloves and coats for institutions in India and international markets. Read more on the company profile page.

Related Gloves & Face Masks

Other items buyers compare or order with this mask:

• Face Mask — the same 3-ply, 50-per-box format in green, useful for colour-coding areas.
• Particulate Protective Face Mask, Melt-Blown — cup-shaped FFP2-level mask for dustier tasks.
• Powder Free Examination Gloves — disposable hand protection for the same procedures.
• Mask Surgical Tie Strap Disposable — tie-on option where ear loops are not preferred.

Browse the full Gloves & Face Masks range.

Frequently Asked Questions

How many masks are in a box of the Non Woven Face Mask?
The Non Woven Face Mask is packed 50 pieces per box in neutral (plain) packing. Order by the number of boxes, keeping in mind that each mask is worn once and replaced for the next session or shift.

What does 25G + 25G + 25G mean on this mask?
On the Non Woven Face Mask, 25G + 25G + 25G gives the specification of each of its three non-woven plies. If you need the fabric weights confirmed in another format for a tender, ask us when you request the quotation.

What is the BFE of the Non Woven Face Mask?
The Non Woven Face Mask is listed with a bacterial filtration efficiency (BFE) of 99%. BFE describes how well the mask material filters a bacterial aerosol in a laboratory test; a good fit over the nose and chin is still needed in use.

What colour is the Non Woven Face Mask?
The Non Woven Face Mask is blue. A green 3-ply mask with the same layer specification and box size is listed separately as the Face Mask (SLE/MK/07), so institutions can use two colours for different rooms or groups.

Who supplies the Non Woven Face Mask?
The Non Woven Face Mask is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. It is sourced for hospitals, laboratories, schools and dealers and can be quoted together with gloves and other protective items.

Can you supply the Non Woven Face Mask in bulk for export?
Yes, the Non Woven Face Mask can be quoted in bulk quantities for buyers in India and international markets. Share the number of boxes, the destination and any documentation your importer needs, and we will confirm what can be arranged.

Request a Quote

For prices and availability, write to us through the contact page with the number of boxes, or place the Non Woven Face Mask in the enquiry cart.

Last updated: 24 September 2026

Safety Face Mask (Product Code: SLE/MK/03) is a white non-woven face mask with a polypropylene melt-blown filter layer, used to filter everyday particulate pollution such as pollen and PM2.5 dust for staff, students and field workers. Its distinguishing feature is the adjustable ear rope, which can be moved to the right position for each face size so one standard mask fits a range of wearers. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier in India.

Specifications

What Is the Safety Face Mask Used For?

The Safety Face Mask is meant for days when the air carries fine particles: pollen season, dusty campus grounds, outdoor environmental-science sampling, store-room clearing or workshop areas next to a lab. Melt-blown polypropylene is the fine-fibre layer that does most of the particle filtering in this type of mask, while the outer non-woven fabric protects it and keeps it comfortable on the skin.

Before use, slide the adjustable ear rope until the mask sits flat against the cheeks with no gaps at the sides, then check that it covers the nose and chin. A snug fit matters more than tightness. Where eyes also need protection from dust or splashes, pair the mask with goggles, and keep spare masks at hand so a soiled one can be swapped straight away.

Supplier

This mask is supplied, not made, by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. The company sources personal protective items like this one so that schools, colleges, laboratories and resellers can buy them on the same order as their lab apparatus, with supply to India and international markets. Learn more on the ScienceLab profile.

Related Gloves & Face Masks

Protection that works alongside the Safety Face Mask:

• Particulate Protective Face Mask, Melt-Blown — head-mounted, cup-shaped FFP2-level alternative.
• Non-Disposable Face Mask — cup-shaped mask with an active-carbon layer.
• Safety Goggles — eye protection to wear with the mask in dusty or splash-prone work.
• Examination Gloves — disposable hand protection for handling samples.

More masks and gloves are listed under Gloves & Face Masks.

Frequently Asked Questions

What is the Safety Face Mask made of?
The Safety Face Mask is made of non-woven fabric with a polypropylene melt-blown layer. The melt-blown layer is the fine-fibre filtering sheet, and the mask is white, in a standard size, and worn with ear hooks.

Can the ear loops of the Safety Face Mask be adjusted?
Yes. The ear rope of the Safety Face Mask can be adjusted to the appropriate position according to face size, which helps the standard-size mask sit closely on smaller and larger faces without gaps at the sides.

What does the Safety Face Mask protect against?
The Safety Face Mask is listed for filtering particulate pollution in daily environments, such as pollen and PM2.5 particles, and is described as helping to isolate bacteria and viruses. It is not a respirator for toxic gases or chemical vapours.

What does the 3-year period of use mean?
The Safety Face Mask listing gives a period of use of 3 years. Ask us to confirm how this figure applies to the batch you are quoted, for example as the storage life of unused masks, before planning stock rotation.

Who supplies the Safety Face Mask?
The Safety Face Mask is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources it for institutions and dealers and can combine it with goggles, gloves and lab coats in one quotation.

What details are needed for a Safety Face Mask quotation?
For a Safety Face Mask quotation, give the product code SLE/MK/03, the number of masks, the delivery location and whether you need any supporting documents for a tender. We will confirm pricing and what paperwork can be provided.

Request a Quote

Ask for a price through the contact page, or add the Safety Face Mask to the enquiry cart with any goggles or gloves you need.

Last updated: 24 September 2026

Miniature Functional Knee Joint (Product Code: SLE/A/34) is a one-half life-size working model of the human knee used to demonstrate how the joint bends and straightens in biology, physical-education and physiotherapy lessons. The model lifts off its base for handling, and the base itself carries a cross-sectional relief of the joint, so one small item shows both movement and internal structure. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Miniature Functional Knee Joint Used For?

Being functional, the knee can be taken off its base and moved through bending and straightening while students watch how the thigh bone rolls and glides on the top of the shin bone. That motion is the starting point for explaining why the knee is described as a modified hinge and why it is vulnerable when twisted under load. Back on its base, the cross-sectional relief shows the joint cut through, so the inside of the knee can be compared directly with what was just seen from the outside.

At half life-size and 0.4 kg it is light enough to pass around a class or pack into a teaching bag, which suits visiting lecturers, sports coaching courses and school labs short on space. Schools often include it in a biology model kit bulk order with larger life-size joints, using this miniature for hands-on movement work.

OEM Manufacturer

Jain Scientific Equipments Private Limited, the business behind the ScienceLab brand, is the OEM (original equipment manufacturer) of the Miniature Functional Knee Joint and makes it at its own licensed factory at Saha, Ambala, Haryana, India.

Schools and coaching institutes buying several units for group work are quoted directly by the manufacturer, and repeat orders are handled the same way. Our company profile tells you more about the company.

Related Bone Models

Items that complement a knee and lower-limb lesson:

• Human Knee Joint Model, Life Size — a full-size knee for detailed structural study
• 3D Printed Human Flexed Knee Joint — shows the knee held in a bent position
• Human Femur Bone Model — the thigh bone that forms the upper half of the knee
• Functional Elbow Joint — another working joint for comparing hinge-type movement

Browse further joint models in our Bone Model category.

Frequently Asked Questions

Is the Miniature Functional Knee Joint life size?
No. The Miniature Functional Knee Joint is one-half life-size, which keeps it compact at 10 × 14 × 24 cm and 0.4 kg, light enough to pass around a class or carry to another room.

What does "functional" mean for the Miniature Functional Knee Joint?
Functional means the Miniature Functional Knee Joint is built to move, so the bending and straightening of the knee can be demonstrated in class rather than only viewed as a static model.

What is on the base of the Miniature Functional Knee Joint?
The base of the Miniature Functional Knee Joint carries a cross-sectional relief of the knee, giving an inside view of the joint to compare with the movable model that sits on it.

Can students handle the Miniature Functional Knee Joint off the base?
Yes. The Miniature Functional Knee Joint can be removed from its base for easy manipulation. Return it to the base after use so it is stored safely alongside the cross-sectional relief.

Are the structures on the Miniature Functional Knee Joint labelled?
Labels or a key are not listed for the Miniature Functional Knee Joint (SLE/A/34). Contact us if numbered identification is important for your course, and the manufacturer will confirm what is supplied.

Who manufactures the Miniature Functional Knee Joint?
The Miniature Functional Knee Joint is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges and dealers.

Can the Miniature Functional Knee Joint be shipped abroad?
Yes. ScienceLab supplies the Miniature Functional Knee Joint to customers in India and international markets. Include your delivery country and quantity in the enquiry so the manufacturer can quote accordingly.

Request a Quote

For pricing direct from the manufacturer on the Miniature Functional Knee Joint, contact us or add it to your enquiry cart.

Last updated: 24 September 2026

Particulate Protective Face Mask, Melt-Blown (Product Code: SLE/MK/04) is a bowl-shaped, head-mounted particulate mask used to protect the wearer from airborne dust and fine particles in laboratories, workshops and stores. It is listed at FFP2 protection level and combines mechanical and electrostatic filtration with a fabric headband, adjustable buckle and aluminium nose clip for a close seal. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India.

Specifications

What Is the Particulate Protective Face Mask Used For?

This mask is chosen for work that raises more dust than an ordinary 3-ply mask is meant for: sieving soils and powders, sanding and cutting in a technical workshop, clearing dusty stores, or handling dry specimens and plaster. FFP2 is a European filtering-facepiece protection class for particles, and the melt-blown filter works in two ways, trapping particles in its fibre web and attracting finer ones with an electrostatic charge.

The cup shape stands away from the lips, which makes breathing and speaking easier during long tasks. To fit it, place the cup over the nose and chin, bring the fabric headband over the head, tighten the buckle until the edges seal, and press the aluminium clip to the shape of the nose bridge. It filters particles only, so it should not be used against gases or solvent vapours.

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab and is based in Ambala, Haryana. It supplies this particulate mask as a sourced protective item for technical institutes, laboratories, schools and dealers, and can quote it with coveralls, gloves and eye protection for buyers in India and international markets. The company profile gives more background.

Related Gloves & Face Masks

Items that complete a dust-protection kit:

• Protective Coveralls — keep dust off clothing during the same tasks.
• Gloves, Chemical Resistant — hand protection when the dust comes from chemical powders.
• Safety Face Mask — lighter ear-hook mask for everyday pollen and PM2.5 exposure.
• Gloves - Protective disposable — single-use gloves for short dusty jobs.

Compare other options in Gloves & Face Masks.

Frequently Asked Questions

What protection level is the Particulate Protective Face Mask, Melt-Blown?
The Particulate Protective Face Mask, Melt-Blown is listed at FFP2 protection level. If your tender or safety plan needs test reports or conformity documents for this rating, tell us when you enquire and we will confirm what is available for the batch.

How is this particulate mask held on the face?
The Particulate Protective Face Mask, Melt-Blown is head-mounted: a natural fabric headband with an adjustable buckle goes around the head instead of ear loops, and an aluminium bar nose clip is shaped over the nose bridge to close the gaps beside the nose.

What kind of filter does the mask use?
The Particulate Protective Face Mask, Melt-Blown uses a mechanical and electrostatic filter. The fibre web physically traps particles, while the electrostatic charge helps capture finer particles, all within a bowl-shaped cover that keeps the filter off the mouth.

Can this mask be used for chemical fumes?
No. The Particulate Protective Face Mask, Melt-Blown is a particle filter and is not meant for gases or solvent vapours. For fume work, use a fume cupboard or a respirator with the correct gas cartridge chosen by your safety officer.

Who supplies the Particulate Protective Face Mask, Melt-Blown?
The Particulate Protective Face Mask, Melt-Blown is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. It is sourced for institutions, workshops and dealers and can be added to a combined order with other protective items.

What size is the Particulate Protective Face Mask, Melt-Blown?
The Particulate Protective Face Mask, Melt-Blown comes in a standard size. The adjustable buckle on the headband and the shapeable aluminium nose clip allow the wearer to tighten the fit so the edges seal around the nose, cheeks and chin.

Request a Quote

Send your required quantity through the contact page, or place the mask in the enquiry cart along with coveralls or gloves.

Last updated: 24 September 2026

3B Human Left Leg Model (Product Code: SLE/A/35) is a stand-mounted model of the left lower limb at about 2/3× life size, roughly 75 cm long, that can be taken apart into 9 parts. It gives anatomy, physiotherapy, sports-science and nursing classes a single leg they can study region by region, from thigh to foot, without needing a full figure. Institutions looking for lab equipment for college teaching in India can order it from Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, which supplies this model.

Specifications

Typical Use

A dedicated limb model lets a lecturer spend a full session on the lower extremity. Students can work through the thigh, knee, lower leg and foot in order, removing parts as each region is covered and naming what they see before moving on. Physiotherapy and sports-science learners find this especially useful when linking anatomy to movement and common injuries of the leg.

Because the model stands upright on its stand at about 75 cm, it can be placed beside a full skeleton or muscular figure so that the class can compare scale and position. For practical examinations, remove one or two of the 9 parts and ask candidates to identify them and replace them correctly; this is quick to set up and easy to mark.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab and based in Ambala, Haryana, supplies this leg model to teaching institutions in India and international markets. As the product name includes the 3B designation, ask us to confirm brand and origin details at the time of quotation. More about the company is on our company profile.

Related Human Models

These items fit the same lower-limb and locomotor lessons:

• Human Leg and Portion of Pelvis Model — shows how the leg connects to the pelvis above.
• Human Knee Joint Model, Life Size — a close-up of the knee for joint and ligament teaching.
• Human Femur Bone Model — the main thigh bone on its own for osteology practicals.
• Human Skeletal Foot Model — completes the limb with the bones of the foot.
• 3B Human Muscular Male and Female Model — a whole-body figure for placing the leg in context.

Explore more limb, joint and torso models in our anatomy models category.

Frequently Asked Questions

Is this a left or right leg?
It is a left leg model. Please contact us if you need to discuss other limb models.

How many parts does it separate into?
It is dissectible into 9 parts, which keeps assembly manageable for students.

What is the scale and length?
About 2/3× life size, with a leg length of about 75 cm, mounted on a stand.

Is this a genuine 3B-branded model?
Brand and origin should be confirmed with us before ordering; ask through the contact page and the quotation will state what is supplied.

Which courses is it suited to?
It fits anatomy, physiotherapy, sports science, nursing and senior biology classes that study the lower limb in detail.

How do I keep the parts in good condition?
Reassemble the leg on its stand after each class, avoid forcing parts into place, and clean with a soft cloth only.

Request a Quote

Tell us the quantity and delivery address for the 3B Human Left Leg Model through our contact page, or add it to the enquiry cart and request one quotation for your whole list.

Last updated: 24 September 2026

Surgical Mask (Product Code: SLE/MK/05) is a blue, disposable surgical face mask used to cover the nose and mouth during procedures, ward rounds and clinical laboratory work. Hospitals, health centres and teaching labs pick it for its standard size, its rating for non-oil aerosols and a stated shelf life of 24 months when kept in a dry place, which helps with stock planning. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which handles disposable lab equipment in India.

Specifications

What Is the Surgical Mask Used For?

A surgical mask is worn by the person carrying out a procedure to help keep droplets from their own nose and mouth away from the patient, the work area or an open culture. Typical uses include minor procedures, dressing changes, sample collection, ward rounds and aseptic work in a clinical or microbiology teaching lab. The blue colour is the familiar clinical shade, so staff and students recognise it quickly.

“Non-oil” aerosol type means the mask is meant for water-based droplets and dry particles, not for oily mists such as those from machine lubricants. Put on a fresh mask for each procedure, avoid touching the front while wearing it, and dispose of it after use. Keep unopened stock in a dry store and issue the oldest boxes first so that masks are used within the stated shelf life.

Supplier

ScienceLab is the name under which Jain Scientific Equipments Private Limited, Ambala, Haryana, trades. The company supplies this Surgical Mask as a sourced clinical consumable, grouping it with gloves, drapes and theatre wear when hospitals, nursing schools and laboratories ask for one quotation, for delivery in India and international markets. See the profile page for more about the company.

Related Gloves & Face Masks

Theatre and procedure items used with the Surgical Mask:

• Gloves, Surgical Powdered Free — hand protection for the same procedures.
• Tunic, Surgical, Woven — theatre tunic worn with mask and gloves.
• Drape, Surgical, Woven — covers the area around the procedure site.
• Mask Surgical Tie Strap Disposable — tie-on disposable mask for staff who prefer straps.

View all items in Gloves & Face Masks.

Frequently Asked Questions

What is the shelf life of the Surgical Mask?
The Surgical Mask has a stated shelf life of 24 months when stored in a dry place. Ask us for the production or expiry date of the batch you are quoted so that you can plan stock rotation in your store.

Is the Surgical Mask disposable?
Yes. The Surgical Mask is a disposable, single-use item. Wear a new mask for each procedure or shift and discard it afterwards; washing or reusing it is not recommended because the fabric and fit are not designed for it.

What does non-oil aerosol type mean for this mask?
The Surgical Mask is listed for non-oil aerosols, meaning water-based droplets and dry particles. It is not intended for oily mists, so workshops handling lubricants or cutting oils should use protection selected for that hazard.

What colour and size is the Surgical Mask?
The Surgical Mask is blue and made in a standard size. If you need other colours or styles for different departments, ask us about the other face masks listed in the same category.

Who supplies the Surgical Mask?
The Surgical Mask is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources it for hospitals, health centres, nursing and medical colleges and dealers, and can quote it together with gloves and theatre wear.

How should the Surgical Mask be stored?
Store the Surgical Mask in a dry place, in its closed packing and away from moisture and dust. Dry storage protects the mask material and supports the stated shelf life of 24 months.

Request a Quote

Tell us the quantity and delivery location through the contact page, or add the Surgical Mask to the enquiry cart with any gloves or drapes for the same order.

Last updated: 24 September 2026

Human Brain Model, 15 Parts (Product Code: SLE/A/36) is a life-size dissectible brain used to teach the detailed internal anatomy of the human brain, including the ventricles and the complete brain stem, in medical, nursing and neuroscience courses. It measures 23 x 15 x 18 cm and comes with a numbered key for identifying each structure. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of human anatomical models, at its own factory in Ambala, India.

Specifications

What Is the 15-Part Human Brain Model Used For?

This is the model to choose when the syllabus reaches the inside of the brain. Taking it apart layer by layer, students can follow the ventricles, the fluid-filled spaces that produce and carry cerebrospinal fluid, and see how they sit among the deep structures of each hemisphere. The complete brain stem allows the connection between the cerebrum, cerebellum and spinal cord to be traced without switching models, which is valuable for neurology and neuroanatomy practicals.

With 15 parts, it rewards a structured approach: dismantle in a fixed order, lay the parts out on a tray, name each numbered structure from the key, and reassemble in reverse. Counting the parts at the end of each session prevents losses. Many anatomy departments keep it as the advanced model in a graded collection of biology lab equipment, alongside simpler brains used for introductory teaching.

OEM Manufacturer

ScienceLab builds this 15-part brain as its OEM (original equipment manufacturer). Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, makes and assembles it at its own licensed factory at Saha, Ambala, Haryana, India.

With so many separable parts, buyers sometimes ask about replacing a lost piece or matching a repeat order to an earlier set; those questions go straight to the manufacturer, so just ask us. Further details are on our company profile.

Related Brain Models

Models that support advanced study of the brain and central nervous system:

• Human Brain Model, 8 Parts — a simpler dissectible brain for introductory sessions
• Enlarged Human Brain Stem Model — a close-up of the brain stem for detailed nerve study
• Human Spinal Cord Section Model — continues the pathways below the brain
• Dissectible Human Neuron — shows the structure of the nerve cell itself
• Horizontally Sectioned Human Head Model — views the brain in cross-section within the head

See every model in our Brain Models category.

Frequently Asked Questions

How many parts does the Human Brain Model, 15 Parts have?
The Human Brain Model, 15 Parts separates into 15 dissectible parts that reveal the detailed internal anatomy of the human brain, so students can work from the outer surface down to the ventricles and the brain stem.

What size is the 15-part human brain model?
The Human Brain Model, 15 Parts is life size and measures 23 x 15 x 18 cm, which lets students handle each part at natural scale and compare it directly with atlas images and specimens.

Does the Human Brain Model, 15 Parts show the ventricles?
Yes. The Human Brain Model, 15 Parts shows the brain ventricles together with the complete brain stem, so the flow of cerebrospinal fluid and the link between cerebrum, cerebellum and spinal cord can be explained on one model.

Is there a key with the 15-part brain model?
Yes. A numbered key is included with the Human Brain Model, 15 Parts, so every numbered structure on the dissectible parts can be named during practicals, revision sessions and spotting examinations.

Is the Human Brain Model, 15 Parts suitable for school students?
The Human Brain Model, 15 Parts can be used with senior students, but its level of detail is aimed mainly at college and medical courses. For introductory lessons, the 4-part or 8-part brain in the same range is simpler to handle.

Who manufactures the Human Brain Model, 15 Parts?
The Human Brain Model, 15 Parts is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to universities, colleges and distributors.

Do you supply the 15-part brain in bulk to universities and overseas?
Yes. ScienceLab supplies the Human Brain Model, 15 Parts to institutions and distributors in India and international markets. Share the quantity and delivery location, and the quotation will come directly from the manufacturer.

Request a Quote

To request a price for the Human Brain Model, 15 Parts, use our contact page or add it to the enquiry cart along with other items for your anatomy lab. Quotes are issued by the manufacturer itself.

Last updated: 24 September 2026