Barrel for Acids 25 ml (Product Code: SCI-112/030) is a 25 ml glass burette with a glass stopcock used to dispense acid solutions drop by drop during titrations in school and college chemistry laboratories. Students rely on it as the measuring heart of a chemistry titration kit, reading delivered volumes on a graduated scale divided into 0.1 ml steps. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is an Acid Burette Used For?

In an acid–base titration, the burette is filled with the standard acid and clamped upright above a conical flask holding a measured volume of alkali and a few drops of indicator. Acid is run in, quickly at first and then drop by drop, until the indicator changes colour; the difference between the first and last readings is the titre. The glass stopcock is the traditional choice for acids, which is why this burette is kept separate from one used for bases.

For good results, rinse the burette with a little of the acid before filling, clear any air bubble from the tip and read the bottom of the meniscus at eye level. A thin film of stopcock grease keeps the glass tap turning smoothly. Drain, rinse and store the burette upside down after the practical so that no acid dries inside.

What to Specify When Ordering

• The number of acid burettes, usually one per student pair or bench.
• Whether matching Burette for Bases 25 ml units are needed for alkaline titrants.
• Whether burette stands and clamps should be included in the same quotation.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714) and the OEM of this acid burette, which it makes at its own licensed factory at Saha, Ambala, Haryana, India.

Export shipments are handled under Importer-Exporter Code AAECJ8618A (DGFT), so dealers and importers abroad can order factory-direct just as Indian schools and colleges do. Replacement burettes for breakages can be reordered directly from the manufacturer — ask us. See our company profile for more.

Related Laboratory Equipment

Everything else a titration bench needs:

• Burette for Bases 25 ml — the companion burette for alkaline titrants.
• Burette Stand — holds the burette vertical over the flask.
• Burette Clamps — a secure grip that does not strain the glass.
• Phenolphthalein — a common indicator for acid–base end points.
• Conical Flask — the titration flask that is swirled during the run.

View all items in the Laboratory Equipment category.

Frequently Asked Questions

What is the Barrel for Acids 25 ml?
The Barrel for Acids 25 ml is a glass burette for acid solutions, fitted with a glass stopcock (faucet). It holds 25 ml, is graduated in 0.1 ml steps and is used to deliver measured volumes of acid during titrations.

What are the capacity and graduation of this acid burette?
The Barrel for Acids 25 ml has a capacity of 25 ml and a graduation interval of 0.1 ml. It is made of glass that is described as heat resistant and chemical resistant, with a graduated scale along its length.

Why use a separate burette for acids?
A glass stopcock like the one on the Barrel for Acids 25 ml suits acid solutions, but alkaline solutions can make ground-glass taps stick. Keeping one burette for acids and another for bases avoids seized stopcocks and cross-contamination between titrants.

How do I read the Barrel for Acids 25 ml accurately?
Clamp the Barrel for Acids 25 ml vertically, remove any air bubble from the tip and read the bottom of the meniscus with your eye level to the mark. Record readings to the nearest 0.1 ml graduation, before and after each titration.

Who manufactures the Barrel for Acids 25 ml?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Barrel for Acids 25 ml. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, dealers and importers.

Can the acid burette be ordered in bulk or for export?
Yes. ScienceLab supplies the Barrel for Acids 25 ml in bulk to buyers in India and international markets. Send the product code SCI-112/030, the quantity and the delivery location through the contact page, and the manufacturer will send a quotation.

Request a Quote

Get a price for the Barrel for Acids 25 ml through our contact page or by adding it to the enquiry cart. Quotations come straight from the manufacturer.

Last updated: 24 September 2026

Burette for Bases 25 ml (Product Code: SCI-115/031) is a 25 ml graduated glass burette with a Teflon or latex valve used to deliver alkaline titrants, such as sodium hydroxide solution, in school and college titration practicals. Chemistry students choose it whenever the titrant would make a ground-glass tap stick, and its scale reads in 0.1 ml divisions, making it a staple of any volumetric analysis kit. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Burette for Bases Used For?

A typical use is finding the concentration of an acid by titrating it with standard sodium hydroxide: the alkali goes into the burette, the acid and an indicator such as phenolphthalein go into a conical flask, and the end point is the first permanent pink colour. Alkalis tend to seize ground-glass stopcocks, whereas a Teflon valve resists this and a latex valve has no ground-glass joint at all, so the burette keeps working smoothly.

Mount the burette upright in a burette clamp, rinse it with a little of the alkali before filling and clear any air bubble from the tip. Read the bottom of the meniscus at eye level, and drain and rinse the burette with water soon after the practical, because alkaline solution left standing can etch glass. With a latex valve, check the rubber for cracks before each class.

What to Specify When Ordering

• The valve you prefer: Teflon or latex.
• The number of base burettes, often matched one-to-one with acid burettes.
• Whether burette stands, clamps or cleaning brushes should be quoted as well.

OEM Manufacturer

Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is the OEM of this base burette and produces it at its own licensed factory at Saha, Ambala, Haryana, India.

When you order through the manufacturer, the valve type is agreed at the quotation stage, and repeat orders of the same version come from the same source. Schools, colleges, dealers and importers are all supplied factory-direct; ask us about spare valves, and read more on our company profile.

Related Laboratory Equipment

Pair the base burette with these titration items:

• Barrel for Acids 25 ml — the acid counterpart with a glass stopcock.
• Burette Stand and Funnel Stand — supports the burette and a filling funnel.
• Burette Clamp - Double — holds acid and base burettes side by side.
• Burette Brush — cleans the long bore after alkaline runs.
• Phenolphthalein Solution — the classic indicator for alkali titrations.

Browse the whole Laboratory Equipment category for more.

Frequently Asked Questions

What valve does the Burette for Bases 25 ml have?
The Burette for Bases 25 ml is offered with a Teflon or latex valve. Please state which one you want when you ask for a quotation, as both avoid the ground-glass tap that alkaline solutions tend to seize.

Why use a separate burette for bases?
Alkaline solutions such as sodium hydroxide can make a ground-glass stopcock stick fast. The Burette for Bases 25 ml uses a Teflon or latex valve instead, so it keeps delivering smoothly and does not contaminate the acid burette used in the same practical.

What are the capacity and graduation of this base burette?
The Burette for Bases 25 ml holds 25 ml and is graduated in 0.1 ml intervals. It is made of glass described as heat resistant and chemical resistant, with a graduated scale for reading the volume delivered.

How should the Burette for Bases 25 ml be cleaned?
Drain the Burette for Bases 25 ml soon after use, rinse it several times with water, clean the bore with a burette brush if needed and store it upside down. With a latex valve, also check the rubber for cracks or stickiness.

Who manufactures the Burette for Bases 25 ml?
ScienceLab, the trading name of Jain Scientific Equipments Pvt Ltd, is the OEM manufacturer of the Burette for Bases 25 ml. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and quoted directly by the manufacturer.

Can the base burette be ordered in bulk or for export?
Yes. ScienceLab supplies the Burette for Bases 25 ml in bulk to schools, colleges, dealers and importers in India and international markets. Send the product code SCI-115/031, the valve type, the quantity and the delivery location through the contact page.

Request a Quote

To price the Burette for Bases 25 ml, use our contact page or add it to the enquiry cart, stating the valve type. The manufacturer sends the quotation directly.

Last updated: 24 September 2026

Measuring Cylinders 10ml (Product Code: SCI-117/032) are small transparent glass cylinders used to measure liquid volumes up to 10 ml in school and college laboratories. Students reach for this school measuring cylinder when a practical calls for just a few millilitres of reagent, indicator or solvent, and its 0.2 ml graduations suit such small volumes. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a 10 ml Measuring Cylinder Used For?

A 10 ml cylinder is the right tool for the small volumes found in test-tube reactions, indicator additions, simple dilutions and chromatography solvent mixes. It is also handy for finding the volume of small objects by water displacement in density experiments. Using a small cylinder for small volumes gives a far more readable result than trying to measure a few millilitres in a large one.

Stand the cylinder on a level bench, fill to just below the required mark and add the last drops with a dropper, then read the bottom of the meniscus at eye level. Although the glass is heat resistant, measuring cylinders are meant for measuring rather than heating, so warm liquids in a beaker instead. Rinse the cylinder after use and let it drain upside down.

What to Specify When Ordering

• The number of 10 ml cylinders, for example one per student group.
• Whether larger cylinders from the same range are needed for the same class.
• Any spares you want to hold for breakages (ask us about quantities).

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, makes these 10 ml cylinders as their OEM at its own licensed factory at Saha, Ambala, Haryana, India.

As a laboratory glassware manufacturer serving schools, colleges, dealers and importers, the company quotes class-set quantities directly and handles repeat orders for breakage replacement itself. Ask us what you need, and read more on our company profile.

Related Laboratory Equipment

Other sizes and handy companions for measuring liquids:

• Measuring Cylinder 25 ml — the next size up for slightly larger volumes.
• Measuring Cylinder 50ml — for medium volumes in class practicals.
• Measuring Cylinder 100ml — for bulk solution preparation.
• Glass Bottle, with Droppers — adds the final drops up to the mark.
• Glass Stirrer — mixes the measured liquid once it is transferred.

See all items in the Laboratory Equipment category.

Frequently Asked Questions

What are the capacity and graduation of the Measuring Cylinders 10ml?
The Measuring Cylinders 10ml hold up to 10 ml and are graduated in 0.2 ml intervals. That scale lets students measure small reagent volumes on a transparent glass body with a clearly visible meniscus.

What material are the Measuring Cylinders 10ml made of?
The Measuring Cylinders 10ml are made of transparent glass that is described as heat resistant and chemical resistant. Glass does not absorb stains or odours easily, so the cylinders can be rinsed clean and reused across many practicals.

How do I read a 10 ml measuring cylinder accurately?
Place the Measuring Cylinders 10ml on a level surface, bring your eye level with the liquid and read the bottom of the curved meniscus against the nearest 0.2 ml mark. Add the final drops with a dropper to avoid overshooting.

Can the Measuring Cylinders 10ml be heated?
Although the glass of the Measuring Cylinders 10ml is heat resistant, measuring cylinders are intended for measuring volumes, not for heating. Warm or boil liquids in a beaker or flask, and let them cool before measuring them in the cylinder.

Who manufactures the Measuring Cylinders 10ml?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Measuring Cylinders 10ml. They are made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to institutions, dealers and importers.

Can these cylinders be ordered in bulk or for export?
Yes. ScienceLab supplies the Measuring Cylinders 10ml in bulk to schools, colleges, dealers and importers in India and international markets. Send the product code SCI-117/032, the quantity and the delivery location through the contact page for a quotation.

Request a Quote

For a price on the Measuring Cylinders 10ml, write to us via the contact page or add them to the enquiry cart. Quotations are issued by the manufacturer directly.

Last updated: 24 September 2026

Eksikator (Product Code: SCI-133/039) is a non-vacuum desiccator used to keep samples, crucibles and chemicals dry while they cool or are stored in school, college and analytical chemistry laboratories. Laboratory staff use this chemistry lab equipment to protect moisture-sensitive materials; it measures 220 mm in diameter, holds samples on a porcelain plate and has an operating temperature of -25 to 120 °C. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is an Eksikator (Desiccator) Used For?

A drying agent such as silica gel or anhydrous calcium chloride goes into the lower part of the vessel, and the porcelain plate holds crucibles, weighing bottles or dried samples above it in dry air. The most common task is cooling heated crucibles to room temperature without them picking up moisture, so that gravimetric results stay accurate. The eksikator is equally useful for storing hygroscopic reagents and keeping dried specimens moisture-free between lessons.

A thin film of grease on the lid rim helps it seal, and sliding the lid sideways opens it more safely than lifting it straight up. Allow very hot crucibles to cool for a moment before placing them inside, keep within the -25 to 120 °C operating range, and replace or regenerate the desiccant once it is spent. Because this model works without vacuum, choose a vacuum desiccator for drying under reduced pressure.

What to Specify When Ordering

• The number of desiccators for your balance room or bench.
• Whether a desiccant such as silica gel or calcium chloride should be quoted with it.
• Whether you need drying under vacuum, in which case a vacuum desiccator is the better choice.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM of the Eksikator and manufactures it at its own licensed factory at Saha, Ambala, Haryana, India.

Because the desiccator comes straight from the factory, laboratories and schools can ask the manufacturer directly about replacement porcelain plates or extra units, and dealers and importers receive quotations without a middleman. Our company profile tells you more.

Related Laboratory Equipment

Items that work with a desiccator in drying and weighing:

• Vacuum Desiccator — for drying under reduced pressure.
• Silica Gel Coarse — a common desiccant for the lower chamber.
• Calcium Chloride 200g — an alternative drying agent.
• Crucible with lid — crucibles are cooled in the desiccator before weighing.
• Crucible & Beaker Tongs — for moving hot crucibles safely.

More items are listed in the Laboratory Equipment category.

Frequently Asked Questions

What is an Eksikator?
Eksikator is another name for a desiccator, a closed laboratory vessel that keeps its contents in dry air over a desiccant. This Eksikator is a non-vacuum model, 220 mm in diameter, with a porcelain plate that supports crucibles and samples.

What are the size and temperature limits of the Eksikator?
The Eksikator has a diameter of 220 mm and an operating temperature range of -25 to 120 °C. Let hot crucibles cool briefly before placing them on the porcelain plate so that the vessel stays within this range.

Which desiccant should be used in the Eksikator?
Silica gel and anhydrous calcium chloride are common choices for the Eksikator. A desiccant is not part of the listed contents, so order it separately and replace or regenerate it when it can no longer absorb moisture.

Can the Eksikator be used under vacuum?
No. The Eksikator is described as a desiccator without vacuum, so it is meant for drying and storage at normal pressure. For work under reduced pressure, choose the Vacuum Desiccator from our range instead.

Who manufactures the Eksikator?
ScienceLab, the trading name of Jain Scientific Equipments Pvt Ltd, is the OEM manufacturer of the Eksikator. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to institutions, dealers and importers.

Can the Eksikator be ordered in bulk or for export?
Yes. ScienceLab supplies the Eksikator to schools, colleges, laboratories, dealers and importers in India and international markets. Send the product code SCI-133/039, the quantity and the delivery location through the contact page for a quotation.

Request a Quote

To request a price for the Eksikator, use our contact page or add it to the enquiry cart. You receive the quotation directly from the manufacturer.

Last updated: 24 September 2026

Straight Coolant (Condenser) (Product Code: SCI-135/040) is a straight Liebig-type glass condenser used to turn hot vapour back into liquid during distillation practicals in school and college chemistry laboratories. It is 480 mm long with a transparent glass body, so students can watch droplets form on the inner tube while cooling water flows through the outer jacket. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its chemistry lab glassware range.

Specifications

What Is the Straight Liebig Condenser Used For?

In a simple distillation the condenser is clamped at a gentle downward slope from the side arm of the boiling flask. Cooling water enters at the lower connection and leaves from the upper one, keeping the jacket full, while vapour condenses on the cool inner wall and runs down into a receiver. Teachers use this set-up to recover pure water from a salt solution, to purify a liquid or to show that liquids boil at different temperatures, and the 480 mm length gives the vapour a long cooling path on a standard bench rig.

The same straight condenser can be mounted upright above a flask for simple reflux work, where vapour condenses and drips back so a mixture can be heated for longer without losing solvent. Clamp it near its middle, ease rubber tubing onto the water connections with a little water as lubricant, start the water flow before heating and let the glass cool before dismantling. It is a standard part of distillation apparatus in school and college laboratories across India.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM (original equipment manufacturer) of this straight condenser. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, institutions, dealers and importers. For vendor registration, the company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the ScienceLab company profile.

Related Laboratory Equipment

These items complete a bench distillation or reflux set-up built around the straight condenser:

• Distillation Pot with Side Tube — the boiling flask whose side tube feeds vapour into the condenser.
• Adapters (Alunge) — a glass adapter that guides condensate from the condenser outlet into the receiver.
• Rubber Tube (Laboratory) — tubing for the cooling-water inlet and outlet.
• Rubber stoppers with holes of different diameters — for sealing the flask neck around a thermometer or tube.
• Retort Stand — holds the condenser and flask at the right angle.

See the full Laboratory Equipment range for more glassware and bench apparatus.

Frequently Asked Questions

What is the Straight Coolant (Condenser) used for?
The Straight Coolant (Condenser) is used to cool vapour back into liquid during distillation, and it can also serve as a simple reflux condenser. It is a straight Liebig-type glass condenser suited to school and college chemistry practicals where students need to see condensation happening.

How long is the Straight Coolant (Condenser)?
The Straight Coolant (Condenser), product code SCI-135/040, is 480 mm long and made of transparent glass that is listed as heat resistant and chemical resistant. If your set-up needs a particular connection size, please confirm it through the contact page before ordering.

Who manufactures the Straight Coolant (Condenser)?
The Straight Coolant (Condenser) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), its OEM, at the company's own factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement requests are therefore handled directly by the manufacturer.

How is cooling water connected to the Straight Coolant (Condenser)?
On the Straight Coolant (Condenser), connect the water supply to the lower connection and run the outlet from the upper one so the jacket stays full. Start the flow before heating the flask and keep it running until the apparatus has cooled down.

How should the Straight Coolant (Condenser) be cleaned and stored?
Rinse the Straight Coolant (Condenser) after each use, flushing both the inner tube and the water jacket, then let it drain and dry on a rack. Store it flat or clamped away from bench edges, because a long glass condenser is easily knocked and chipped.

What should a quotation request for the Straight Coolant (Condenser) include?
A quotation request for the Straight Coolant (Condenser) should give the code SCI-135/040, the quantity, the delivery location and any matching items such as flasks, adapters or tubing. Send it through the contact page or the enquiry cart and ScienceLab will reply directly.

Can the Straight Coolant (Condenser) be ordered in bulk or for export?
Yes, the Straight Coolant (Condenser) can be quoted in institutional quantities and for dealers and importers, for India and international markets. Share the quantity and destination on your enquiry so ScienceLab can confirm packing and dispatch details for the order.

Request a Quote

To order the Straight Coolant (Condenser), send your quantity and delivery details through the contact page or add it to the enquiry cart. Quotations come direct from the manufacturer, so you deal with the team that makes the condenser.

Last updated: 24 September 2026

Chemical Beaker (Bekera) 50ml (Product Code: SCI-137/041) is a small low-form borosilicate glass beaker used to hold, mix and gently warm small volumes of liquid in school and college chemistry practicals. With a 50 ml capacity and a graduated side, it lets each student run an individual test with only a little reagent, which keeps chemical use and waste down. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its borosilicate glassware range.

Specifications

What Is the 50 ml Beaker Used For?

A 50 ml beaker is the working vessel for small-scale chemistry: testing a few millilitres of a solution with an indicator, dissolving a small crystal sample, watching a precipitate form when two solutions meet, or holding a portion of reagent taken from a stock bottle so the bottle itself stays uncontaminated. Because it is low and wide, it sits steadily on the bench and is easy to reach into with a dropper or a glass rod.

The graduations give a quick estimate of volume; for exact amounts, measure the liquid in a measuring cylinder or pipette first and then transfer it. The borosilicate glass is heat resistant, so the beaker can be warmed gently on a wire gauze, but let it cool before picking it up because its small size leaves little room to grip away from hot glass. Small beakers like this are a staple of chemistry lab equipment for schools in India.

What to Specify When Ordering

• Capacity and code — this listing is the 50 ml beaker, SCI-137/041; other capacities are separate listings.
• Quantity — small beakers are usually counted per student or per bench, so give the number of places to equip.
• Accessories — say whether you also need stirring rods, small measuring cylinders or beaker brushes.
• Delivery location — needed so the quotation can include dispatch within India or abroad.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this 50 ml beaker. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells factory-direct to schools, colleges, dealers and importers instead of through traders. Because the manufacturer handles orders itself, replacing breakages or repeating an order for the next academic year is simply a matter of asking us. Background on the company is on the ScienceLab profile page.

Related Laboratory Equipment

Items that are used alongside a small beaker at the student bench:

• Chemical Beaker (Bekera) 100ml — the next size up when a test needs more liquid.
• Stirring Rod, Glass — for mixing and for pouring cleanly along the rod.
• Measuring Cylinders 10ml — measures small volumes accurately before they go into the beaker.
• Beaker Brush — for cleaning after each practical.

Browse the complete Laboratory Equipment category for more glassware.

Frequently Asked Questions

What is the capacity of the Chemical Beaker (Bekera) 50ml?
The Chemical Beaker (Bekera) 50ml holds 50 ml and has graduations on its side for estimating volume. It is a low-form, transparent borosilicate glass beaker sized for individual student tests and small-scale mixing rather than bulk preparation.

Can the Chemical Beaker (Bekera) 50ml be heated?
Yes, the Chemical Beaker (Bekera) 50ml is made of heat-resistant borosilicate glass and can be warmed gently on a wire gauze over a burner. Heat it gradually, never heat it empty, and let it cool before handling it or rinsing it in cold water.

Are the graduations on the Chemical Beaker (Bekera) 50ml suitable for accurate measurement?
No, the graduations on the Chemical Beaker (Bekera) 50ml are for estimating volume. For accurate work, measure liquids with a measuring cylinder, pipette or burette and use the beaker for mixing, holding and warming. If you need a calibration certificate, discuss it with us before ordering.

Who manufactures the Chemical Beaker (Bekera) 50ml?
The Chemical Beaker (Bekera) 50ml is manufactured by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, which is its OEM. It is made at the company's own factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges and dealers.

How should a school order the Chemical Beaker (Bekera) 50ml for a class?
Order the Chemical Beaker (Bekera) 50ml by the number of students or benches that will use it at the same time, plus a few spares for breakage. Give the quantity, product code SCI-137/041 and delivery location on your enquiry, and ScienceLab will prepare a quotation.

Can the Chemical Beaker (Bekera) 50ml be supplied for export?
Yes, ScienceLab quotes the Chemical Beaker (Bekera) 50ml for schools and institutions in India and for dealers and importers in international markets. Mention the destination and quantity in your enquiry so glassware packing and dispatch can be confirmed.

Request a Quote

Send the quantity of Chemical Beaker (Bekera) 50ml you need through the contact page, or add it to the enquiry cart with your other glassware. Your quotation comes straight from ScienceLab as the manufacturer.

Last updated: 24 September 2026

Chemical Beaker (Bekera) 100ml (Product Code: SCI-139/042) is a low-form, graduated borosilicate glass beaker used for everyday mixing, dissolving and heating at the student bench in school and college chemistry labs. Its 100 ml capacity makes it the general-purpose size for pair or group work, holding enough solution for a complete reaction while staying light and easy to handle. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 100 ml Chemical Beaker Used For?

Typical jobs for a 100 ml beaker include dissolving a weighed solid in water to make a solution, carrying out a neutralisation with an indicator, collecting the filtrate that drips from a funnel and warming a solution on a tripod and gauze to speed up dissolving. The transparent glass lets students see colour changes, bubbles and precipitates clearly.

Pour from the beaker along a glass rod to avoid drips, keep the liquid well below the rim when stirring, and label beakers that hold different solutions. After use, rinse it with tap water and then distilled water so the next class starts with clean glass. It is one of the core sizes when putting together a beaker set for a school lab in India.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which does business as ScienceLab, is the original equipment manufacturer (OEM) of the Chemical Beaker (Bekera) 100ml. Production takes place at the company's licensed factory at Saha, Ambala, Haryana, India, so schools and dealers buy from the maker rather than from a trading intermediary. Institutions planning glassware for a new session can ask the manufacturer directly about replacement quantities and repeat orders. Company background is on the ScienceLab company profile.

Related Laboratory Equipment

Other items students reach for while working with a 100 ml beaker:

• Chemical Beaker (Bekera) 50ml — a smaller beaker for individual spot tests.
• Chemical Glass (Bekera) 250 ml — a larger beaker for water baths and heating.
• Measuring Cylinder 100ml — measures volumes accurately before transfer.
• Gauze Wire — spreads burner heat evenly under the glass.

More glassware and bench items are listed under Laboratory Equipment.

Frequently Asked Questions

What is the Chemical Beaker (Bekera) 100ml used for?
The Chemical Beaker (Bekera) 100ml is used to dissolve, mix, hold and gently heat liquids during student chemistry experiments. Its graduated, low-form borosilicate glass body suits everyday tasks such as preparing solutions, neutralisation tests and collecting filtrate in school and college labs.

What is the Chemical Beaker (Bekera) 100ml made of?
The Chemical Beaker (Bekera) 100ml is made of transparent borosilicate glass, listed as both heat resistant and chemical resistant. It can therefore hold common laboratory solutions and be warmed gently on a wire gauze during routine practical work.

Does the Chemical Beaker (Bekera) 100ml have volume markings?
Yes, the Chemical Beaker (Bekera) 100ml is graduated, so students can read an approximate volume directly from the side. For precise measurement, use a measuring cylinder or pipette and keep the beaker for mixing and heating.

Who makes the Chemical Beaker (Bekera) 100ml?
Jain Scientific Equipments Pvt Ltd (ScienceLab) makes the Chemical Beaker (Bekera) 100ml as its OEM, at its own factory at Saha, Ambala, Haryana, India. Buyers receive quotations and repeat supplies directly from the manufacturer.

How should the Chemical Beaker (Bekera) 100ml be heated safely?
Heat the Chemical Beaker (Bekera) 100ml on a wire gauze over a tripod, never directly in a flame and never when empty. Warm it gradually, stir with a glass rod, and use beaker tongs or let it cool before lifting it off the tripod.

What details are needed to quote the Chemical Beaker (Bekera) 100ml?
To quote the Chemical Beaker (Bekera) 100ml, ScienceLab needs the product code SCI-139/042, the quantity, the delivery address or destination country and any other glassware for the same order. Send these through the contact page or the enquiry cart.

Request a Quote

Add the Chemical Beaker (Bekera) 100ml to the enquiry cart or send your requirement through the contact page. As the manufacturer, ScienceLab quotes directly for schools, colleges, dealers and importers.

Last updated: 24 September 2026

Chemical Glass (Bekera) 250 ml (Product Code: SCI-142/043) is a graduated low-form borosilicate glass beaker used to heat, mix and hold medium volumes of liquid in school and college chemistry and biology labs. At 250 ml it is large enough to serve as a water bath for test tubes or to concentrate a solution for crystallisation, yet small enough for a student tripod. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 250 ml Glass Beaker Used For?

The 250 ml size is the one practical classes reach for when heat is involved. Students part-fill it with water and stand test tubes in it as a simple water bath, boil water to show how heat affects a substance, or warm a salt solution until crystals begin to form on cooling. In biology practicals it is handy for boiling leaves before a starch test.

Stand the beaker on a wire gauze over a tripod, stir when bringing a liquid to the boil to prevent sudden bumping, and keep the flame moderate. This heat-resistant borosilicate laboratory glassware tolerates routine heating, but a hot beaker should still not be set down on a cold or wet surface. Its graduations also give a quick check of how much liquid has evaporated.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM of this 250 ml beaker and produces it at the company's own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges and institutions buy it straight from the manufacturer, and dealers and importers receive factory-direct quotations. If a beaker breaks during the year, ask us for replacements under the same product code. Read about the company on the ScienceLab profile.

Related Laboratory Equipment

Pair the 250 ml beaker with these items for heating and measuring work:

• Chemical Beaker (Bekera) 100ml — a smaller beaker for student-scale reactions.
• Chemical Beaker (Bekera) 500 ml — a larger beaker for class solutions.
• Tripod Stand 200mm — supports the beaker above the burner.
• Gauze Wire, Ceramic Centre — spreads heat evenly under the glass.
• Measuring Cylinder 250 ml — for accurate volumes before transfer.

Find more glassware in the Laboratory Equipment category.

Frequently Asked Questions

What is the Chemical Glass (Bekera) 250 ml?
The Chemical Glass (Bekera) 250 ml is a laboratory beaker: a graduated, low-form vessel of transparent borosilicate glass that holds 250 ml. It is used in school and college labs for heating, mixing and holding liquids, including use as a small water bath.

Can the Chemical Glass (Bekera) 250 ml be used as a water bath?
Yes, the Chemical Glass (Bekera) 250 ml works well as a simple water bath: part-fill it with water, heat it on a gauze and tripod, and stand test tubes inside. Its heat-resistant borosilicate glass suits this kind of routine warming.

Is the Chemical Glass (Bekera) 250 ml resistant to chemicals?
Yes, the Chemical Glass (Bekera) 250 ml is listed as chemical resistant and is made of borosilicate glass, so it suits the solutions used in school practicals. Rinse it promptly after use so that residues do not dry onto the glass.

Who manufactures the Chemical Glass (Bekera) 250 ml?
The Chemical Glass (Bekera) 250 ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) at its own factory at Saha, Ambala, Haryana, India. ScienceLab is the OEM, so buyers deal with the maker for quotations, repeat orders and replacement pieces.

Why is the Chemical Glass (Bekera) 250 ml not called a beaker?
Chemical Glass (Bekera) 250 ml is the catalogue name of this item, and it is a standard 250 ml laboratory beaker. When ordering, quote product code SCI-142/043 so there is no confusion with other glassware in the range.

How do I request a quotation for the Chemical Glass (Bekera) 250 ml?
Send the quantity of Chemical Glass (Bekera) 250 ml, the product code SCI-142/043 and the delivery location through the contact page, or add it to the enquiry cart. ScienceLab quotes schools, institutions, dealers and importers in India and international markets.

Request a Quote

Request the Chemical Glass (Bekera) 250 ml through the contact page or the enquiry cart. Quotations are issued directly by ScienceLab, the manufacturer, with no trading intermediary.

Last updated: 24 September 2026