The Vehicle Transmission 5 Speed Manual Gearbox is a real cutaway drivetrain for following engine power to the wheels. It has a sectioned gearbox with 5 speeds and reverse, a 2-speed reduction gear, drive shafts with universal joints and self-locking hypoid differentials. These parts are connected to work together when operated by hand, and they are painted in different colours.
| Parameter | Detail |
|---|---|
| Gearbox | 5 speeds and reverse |
| Reduction gear | 2-speed |
| Drive shafts | With universal joints |
| Differentials | Self-locking hypoid |
| Control | Movement restorer with front-wheel-drive manual control |
| Operation | Manual |
| Construction | Accurate real cutaway parts, connected together to show their operation |
| Finish | Parts and cross-sections painted in different colours |
| Dimensions and weight | Approx. 800 × 300 × 1100 mm; 225 kg |
| Product code | SLE/MCE/69 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Measuring the ratios. Select each of the five speeds and reverse in turn. Mark the input shaft and the output, then count input turns for one output turn and tabulate the results. Students note which gears turn the output more slowly than the input, which come close to one turn for one, and how reverse changes the direction.
Following the drive in each gear. Using the colour-coded cut sections, students trace which gear pair carries the drive in every position, and what happens to the shafts in neutral. They sketch the power path for first gear and top gear side by side.
High and low range. Repeat the ratio count with the 2-speed reduction gear in each position and multiply the two figures to get the overall ratios. Then follow the drive on through the drive shafts and universal joints to the self-locking hypoid differentials, and compare them with the differential gear model.
Linking the course together. The clutch structure trainer mechanical manual shows how drive reaches the gearbox, the gear train model covers the ratio basics, and the cut model of automatic transmission system lets students compare manual selection with automatic shifting.
Reverse uses an extra idler gear to turn the output the other way, and in many manual gearboxes it has no synchromesh. If the vehicle is still rolling, or the clutch does not release fully and the input shaft keeps spinning, the teeth clash. Stop, hold the clutch down for a moment, then select reverse.
In a constant-mesh gearbox the forward gears stay in mesh all the time, and the gears on one of the shafts spin freely on bearings. Moving the lever slides a sleeve along the shaft until it locks onto the dog teeth of the chosen gear. Only then does that gear drive the output shaft.
In a constant-mesh gearbox, the input shaft keeps turning the gears it meshes with, and those turn the free gears on the output side. Because no sliding sleeve has locked any of the free gears to its shaft, the output stays still and no drive reaches the wheels.
It gives a high and a low range, so each gearbox ratio can be used in either range and the number of overall ratios doubles. The low range multiplies torque further for heavy loads, steep climbs or slow, careful driving, while the high range is used for normal running.
In a hypoid set the pinion is offset from the centre of the crown wheel, usually below it, so the teeth slide across each other as well as rolling. That sliding at high pressure needs an extreme-pressure hypoid gear oil. Ordinary oil lets the film break down, and the teeth wear and score quickly.
A self-locking or limited-slip differential restricts how much faster one wheel can turn than the other. When one wheel loses grip, the differential sends more torque to the wheel that still grips instead of letting the slipping wheel spin freely. Normal turns are still allowed, so the vehicle corners smoothly.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026