Apparatus for Demonstrating the Change of Aggregate States of Matter (Product Code: SCL-377/012) is a stand-and-sensor setup used to follow the temperature of a substance as it melts, boils or condenses, in school science and physics classrooms. A 500 ml glass beaker held on a vertical tripod is monitored with temperature sensors reading to 0.1 °C, and a chart explains the states of matter. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Change of States of Matter Apparatus Used For?

The set supports the standard lessons on solids, liquids and gases. A substance such as ice or water is placed in the 500 ml beaker on the tripod and warmed with a suitable laboratory heat source, while the sensors are held in position with the clips so that temperature can be logged at regular intervals. Plotting temperature against time gives a heating curve with flat sections at the melting and boiling points, where energy goes into changing the state rather than raising the temperature.

The chart lets the teacher link each flat section of the curve to the change taking place — melting, boiling, condensing or freezing — and the 0.1 °C resolution makes those plateaus easy to pick out in the data. Keep the beaker centred on the stand, never heat it empty, and let glassware cool before handling. For schools building up thermometry apparatus in India or overseas, it brings a complete change-of-state demonstration together in one set.

What to Specify When Ordering

• The number of units needed for your demonstration benches.
• The temperature range your experiments need, so that the sensor scale can be confirmed before dispatch.
• Whether a companion heat kit, such as the KITI for Heat and Thermometers, should be quoted as well.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM behind this apparatus: the set is made up and assembled at the company's own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, institutions, dealers and importers are supplied factory-direct, with quotations prepared by the manufacturer rather than a trading house.

Spare beakers, clips or charts and repeat orders can be requested from the manufacturer itself — ask us. The ScienceLab company profile has more about who we are.

Related Laboratory Equipment

Heat and temperature items that suit the same lessons:

• Aggregate States of Water — a further demonstration of water as solid, liquid and gas.
• KITI for Heat and Thermometers — a companion kit for heat and thermometer activities.
• Laboratory Thermometers 0-200 deg C — a glass thermometer for cross-checking sensor readings.
• Ice Melting Kit — a simple melting activity for younger classes.

Explore the wider Laboratory Equipment range for other heat and matter apparatus.

Frequently Asked Questions

What is included with the aggregate states apparatus?
The Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012) includes a vertical tripod, air temperature sensors, 5 clips, a 500 ml glass beaker, five bulbs, a triangular stand and a chart for demonstrating the change of aggregate states of matter.

How precise are the temperature sensors?
The air temperature sensors of the Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012) have a resolution of 0.1 °C, with a scale starting at -30 °C. Please confirm the upper limit of the scale with us before ordering if your experiments involve high temperatures.

Which changes of state can be demonstrated?
With the Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012), teachers typically show ice melting, water boiling and vapour condensing, logging temperature over time to reveal the flat plateaus that mark each change of state.

Is a heat source included with the apparatus?
A heat source is not named among the parts of the Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012). Use a suitable laboratory heater or burner, or ask us through the contact page to quote one together with the apparatus.

Who manufactures the Apparatus for Demonstrating the Change of Aggregate States of Matter?
The Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct.

Can the apparatus be ordered in quantity or exported?
Yes. The Apparatus for Demonstrating the Change of Aggregate States of Matter (SCL-377/012) is supplied to schools, colleges, dealers and importers in India and international markets. State the quantity and destination in your enquiry to receive a quotation from the manufacturer.

Request a Quote

Request a quotation for this change-of-state apparatus through the contact page, or add it to the enquiry cart with the rest of your list. Quotations come from the manufacturer directly.

Last updated: 24 September 2026

KITI for Heat and Thermometers (Product Code: SCL-375/013) is a classroom heat kit used to teach temperature measurement and simple heat-transfer activities in school science lessons. It combines a scaled wall thermometer, with ranges listed as 0–50, 0–200 and −10 to 110 degrees, with glass and plastic 100 ml cups, candles in metal holders and small plastic accessories. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Heat and Thermometers Kit Used For?

The kit covers the first steps in thermometry: reading a scale correctly, comparing hot and cold water, and recording how temperature changes over time. Because it includes matching 100 ml cups in both glass and plastic, students can fill one of each with the same warm water and compare how quickly each cools — a simple fair test of how different materials pass on heat. The dropper and the two 165 x 5 mm plastic tubes help pupils handle small quantities of water during these activities.

The five candles in metal holders provide small, controllable heat sources for demonstrations such as warming a little water or showing that warm air rises. Always stand the candles on a heat-proof surface, keep hair and paper well clear, and let a teacher light them for younger pupils. As a heat energy science kit, it gives a class hands-on temperature activities without needing a fully equipped laboratory.

What to Specify When Ordering

• The number of kits needed for your class groups.
• Which thermometer range suits your lessons (listed ranges: 0–50, 0–200 and −10 to 110 degrees), so the configuration can be confirmed.
• Whether extra candles or cups should be added for larger classes.

OEM Manufacturer

This heat kit is produced by Jain Scientific Equipments Private Limited, which does business as ScienceLab and acts as the kit's original equipment manufacturer. Kits are put together and packed at the company's licensed factory at Saha, Ambala, Haryana, and supplied without intermediaries to schools, institutions, dealers and importers.

Replacement candles, cups or thermometers and repeat orders are handled by the manufacturer — contact us for availability. Company background is on the ScienceLab profile page.

Related Laboratory Equipment

Items that continue the heat and temperature topic:

• Apparatus for Demonstrating the Change of Aggregate States of Matter — takes heat lessons on to melting and boiling.
• Laboratory Thermometers — extra thermometers so every group can take readings.
• Air Thermometer — shows how air expands when it is warmed.
• Calorimetry — a senior-level experiment on the specific heat capacity of water.

Find more classroom apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What does the KITI for Heat and Thermometers contain?
The KITI for Heat and Thermometers (SCL-375/013) contains a scaled wall thermometer, a plastic bowl, a plastic dropper, two 165 x 5 mm plastic tubes, two 100 ml glass cups, two 100 ml plastic cups, two holders, five candles with metal holders and five plastic pins.

What temperature ranges does the kit's thermometer cover?
The KITI for Heat and Thermometers (SCL-375/013) lists a scaled wall thermometer with ranges of 0–50, 0–200 and −10 to 110 degrees. Confirm the exact thermometer configuration with us when ordering so that it matches the activities in your syllabus.

Why does the kit include both glass and plastic cups?
The KITI for Heat and Thermometers (SCL-375/013) includes two 100 ml glass cups and two 100 ml plastic cups so students can compare how the same amount of warm water cools in different materials, a simple introduction to conduction and insulation.

Is the heat kit suitable for younger students?
The KITI for Heat and Thermometers (SCL-375/013) includes candles, so any activity with a flame should be supervised by a teacher, done on a heat-proof surface and kept away from paper and loose clothing. The cups, dropper and tubes are simple for pupils to handle.

Who manufactures the KITI for Heat and Thermometers?
The KITI for Heat and Thermometers (SCL-375/013) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools and dealers buy it directly from the manufacturer.

What information is needed for a quotation?
To quote for the KITI for Heat and Thermometers (SCL-375/013), we need the number of kits, any extra candles, cups or thermometers you want, and your delivery city or country. Send these through the contact page for a quotation from the manufacturer.

Request a Quote

Use the contact page to ask for a quotation on this kit, or add it to your enquiry cart alongside other classroom items. Your quote is prepared directly by the manufacturer.

Last updated: 24 September 2026

Calorimetry (Product Code: SCL-373/014) is an electrical calorimetry experiment set used to determine the specific heat capacity of water and compare it with the table value, in senior school and college physics labs. Water is heated electrically while voltage, current, time and temperature are logged on the digital voltmeter and ammeter, a digital stopwatch and two thermometers. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Calorimetry Set Used For?

The experiment rests on a simple energy balance. The heater, powered from the 1.5–12 V supply, delivers electrical energy equal to voltage × current × time, and the water absorbs it as heat equal to mass × specific heat capacity × temperature rise. Students set a steady current with the 10 Ω rheostat, read V and I on the digital meters, time the heating with the stopwatch and note the temperature rise, then solve for the specific heat capacity and compare their answer with the table value.

Weigh the water before heating, stir gently throughout so the temperature stays uniform, and take readings at regular intervals rather than relying on a single end point. The gap between the measured and table values opens a useful discussion of heat lost to the surroundings. Handle the mercury thermometer with care and follow your school's procedure if one ever breaks; the digital thermometer offers a quick second reading. For colleges comparing calorimeter experiment kits in India, this set brings the meters, supply and timing together in one order.

What to Specify When Ordering

• How many sets your practical groups will use at the same time.
• Whether you need the complete packing list, including the heater rating, confirmed before ordering.
• Any spare 4 mm, 50 cm connecting wires or an extra digital thermometer for larger classes.
• The delivery city or country, so packing and freight can be included.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM that makes up this calorimetry set at its own licensed factory in Saha, Ambala, Haryana, and supplies it directly to schools, colleges, dealers and importers. The company is a registered MSME enterprise whose major activity is manufacturing (Udyam UDYAM-HR-01-0003714), and its export shipments move under Importer-Exporter Code AAECJ8618A issued by the DGFT.

Spare meters, leads or thermometers and repeat orders are handled by the manufacturer itself — ask us. The ScienceLab profile explains who we are and what we make.

Related Laboratory Equipment

Useful additions and alternatives for heat-capacity practicals:

• Calorimeter, Electric — an alternative electrical calorimeter for the same measurement.
• Calorimeter Set, Aluminium — vessels for method-of-mixtures experiments.
• Immersion Heater — a heater option for warming water in other heat experiments.
• Digital Chronometer (Stopwatch) — a spare timer for extra student groups.
• Digital Thermometer — an additional digital temperature reading.

For more heat and electricity apparatus, visit the Laboratory Equipment category.

Frequently Asked Questions

What does the Calorimetry set measure?
The Calorimetry set (SCL-373/014) is used to determine the specific heat capacity of water experimentally and compare it with the table value. Electrical energy from the heater is calculated from voltage, current and time, then matched against the temperature rise of the water.

Which meters come with the Calorimetry set?
The Calorimetry set (SCL-373/014) includes a digital voltmeter reading up to 19.99 V DC, a digital ammeter reading up to 19.99 A DC, a digital stopwatch, a digital thermometer and a mercury thermometer covering -10 to 110 °C.

What power supply does the set use?
The Calorimetry set (SCL-373/014) comes with power supply equipment adjustable from 1.5 to 12 V AC/DC at 3 A, together with a 10 Ω rheostat rated 3.3 A for setting a steady heater current during the experiment.

Can I see the complete packing list before ordering?
Yes. The parts listed for the Calorimetry set (SCL-373/014) cover the meters, supply, rheostat, heater, thermometers, stopwatch and eight pairs of leads. Ask us through the contact page for the complete packing list, including the heater rating, before you order.

Who manufactures the Calorimetry set?
The Calorimetry set (SCL-373/014) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges, dealers and importers.

Are calibration certificates available for the meters?
Whether calibration certificates can be supplied for the digital meters in the Calorimetry set (SCL-373/014) should be discussed with us before ordering. Mention the requirement in your enquiry so that the manufacturer's quotation can address it.

Can the Calorimetry set be ordered in bulk or for export?
Yes. The Calorimetry set (SCL-373/014) can be ordered in multiple sets by institutions, dealers and importers in India and international markets. Share the number of sets and the destination with us to receive a quotation from the manufacturer.

Request a Quote

For a quotation on the Calorimetry set, contact us via the contact page or add it to the enquiry cart. As the manufacturer, we quote directly — there is no distributor in between.

Last updated: 24 September 2026

Communication Vessel Apparatus (Product Code: SCL-371/015) is a set of interconnected containers used to demonstrate that a liquid comes to rest at the same level in every connected vessel, in school hydrostatics and general science lessons. Mounted on a 230 x 100 x 22 mm wooden base with a total height of 160 mm, it sits easily on a teacher's desk for whole-class viewing. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Communicating Vessels Apparatus Used For?

Communicating vessels are one of the first hydrostatics demonstrations students meet. Water poured into any one container flows through the connection below the surface until every container shows the same level, and adding more water to one of them simply raises all the levels together. The same principle explains household water tanks feeding taps, canal locks and the U-tube manometers students meet later in physics.

A few drops of food colouring or ink in the water make the levels easy to see from the back of the room. Stand the apparatus on a level surface before filling, pour slowly so that no air bubbles are trapped in the connection, and empty and dry it after the lesson before storing it upright. For schools assembling physics lab equipment in India or abroad, it is a compact demonstration that needs nothing more than water.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the original equipment manufacturer of this communicating vessels apparatus. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and sold directly to schools, colleges, dealers and importers rather than through traders.

For repeat orders, or a replacement part after an accidental breakage, you speak to the manufacturer itself — ask us. Read about the company on the ScienceLab profile.

Related Laboratory Equipment

Other fluids and pressure apparatus for the same topic:

• Pascal's Sphere — shows that pressure in a liquid acts equally in all directions.
• Pascal's Principle Demonstrator — a further demonstration of pressure transmission in fluids.
• Set to Demonstrate Archimedes' Principle/Law — moves the lesson on to upthrust in liquids.
• Measuring Cylinder 500 ml — for measuring and pouring the water.
• Apparatus for Demonstrating the Boil-Marriott Law — pressure in gases, to contrast with liquids.

The full Laboratory Equipment category lists more demonstration apparatus.

Frequently Asked Questions

What does the Communication Vessel Apparatus demonstrate?
The Communication Vessel Apparatus (SCL-371/015) demonstrates that containers connected below the liquid surface, holding the same liquid with equal pressure on its surface, settle to the same liquid level, and that liquid added to one container produces a new equal level in all of them.

What are the dimensions of the apparatus?
The Communication Vessel Apparatus (SCL-371/015) is mounted on a wooden base measuring 230 x 100 x 22 mm and has a total height of 160 mm, so it fits on a desk or bench for a whole-class demonstration.

Which liquid should be used in the demonstration?
Plain water is the usual choice for the Communication Vessel Apparatus (SCL-371/015), and a few drops of food colouring or ink make the equal levels easier to see. Avoid mixing different liquids in one demonstration, because the equal-level rule applies to the same liquid.

How should the apparatus be cleaned and stored?
After use, empty the Communication Vessel Apparatus (SCL-371/015), rinse the containers with clean water and let them dry fully before storage. Keep it upright on its wooden base and away from standing water so the wood stays in good condition.

Who manufactures the Communication Vessel Apparatus?
The Communication Vessel Apparatus (SCL-371/015) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied directly by the manufacturer to schools, dealers and importers.

Can several units be ordered for a school or for export?
Yes. The Communication Vessel Apparatus (SCL-371/015) is supplied in quantity to schools, colleges, dealers and importers in India and international markets. Tell us the number of units and the delivery destination through the contact page to receive a quotation.

Request a Quote

To order or get a quotation for the Communication Vessel Apparatus, reach us on the contact page or use the enquiry cart. You will hear back from the manufacturer directly.

Last updated: 24 September 2026

Equipment Kit for Demonstrating Electrical Experiments (Product Code: SCL-367/017) is a bench kit of semiconductor components, resistors and meters used to demonstrate basic electrical and electronic circuits in secondary school and college physics labs. It pairs a 2N2222 NPN transistor, a 5.1 V Zener diode and two 1N4007 diodes with a digital multimeter, a 0–10 V DC voltmeter and a 0–5 A ammeter. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Electrical Experiments Kit Used For?

The kit covers the core semiconductor and circuit practicals in one box. With the 1N4007 diodes, students show that current flows in one direction only and plot forward and reverse characteristics; the 5.1 V Zener diode demonstrates voltage regulation once its breakdown voltage is reached; and the 2N2222 NPN transistor can be wired as a simple switch. The 1 kΩ and 100 kΩ resistors set the currents in these circuits, while the voltmeter, ammeter and multimeter record what happens.

Build each circuit on the 4 mm connection board with the supply switched off, connect a suitable low-voltage DC source from your laboratory, set the 22 Ω rheostat to maximum resistance before switching on, and raise the current gradually so no component is overloaded. Check polarity carefully, since diodes and transistors only work the right way round. As a Zener diode kit for schools and colleges in India and abroad, it lets one teacher demonstrate several syllabus experiments with a single set of parts.

What to Specify When Ordering

• The number of kits needed for demonstration or group work.
• Whether a low-voltage power supply should be quoted, as none is listed in the kit.
• Spare transistors, Zener diodes, 1N4007 diodes or resistors for student use.
• Extra 4 mm leads if your laboratory does not have enough for every group.

OEM Manufacturer

Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is the OEM of this electrical experiments kit. The transistor, diodes and resistors are standard electronic components; the kit itself is made up and packed at the company's own licensed factory at Saha, Ambala, Haryana, and supplied directly to schools, colleges, dealers and importers.

Spare components and repeat kits come straight from the manufacturer — ask us about availability. The ScienceLab profile describes the company in more detail.

Related Laboratory Equipment

Components and meters that extend the kit:

• NPN Transistor — spare transistors for student circuits.
• Zener Diode — replacement Zener diodes.
• Zener Diode Experiment Circuit Board — a dedicated board for Zener characteristic practicals.
• Standard Digital Multimeter — an extra multimeter for group work.
• Connecting Wire — leads for building the circuits.

Browse more electricity apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What components are in the electrical experiments kit?
The Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017) contains a 2N2222 NPN transistor, a 5.1 V Zener diode, two 1N4007 diodes, one 1 kΩ and three 100 kΩ resistors, a digital multimeter, a 0–10 V DC voltmeter, a 0–5 A ammeter, a 22 Ω rheostat, a 4 mm connection circuit, a metal ruler, a switch button and a universal clamp.

Which experiments can the kit demonstrate?
The Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017) supports diode forward and reverse bias, Zener voltage regulation, the transistor as a switch, resistor combinations and current control with a rheostat, with all readings taken on the kit's own meters.

Is a power supply included in the kit?
A power supply is not listed among the parts of the Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017). Use a suitable low-voltage DC supply from your laboratory, or ask us through the contact page to quote one together with the kit.

What cables does the kit work with?
The Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017) includes a circuit designed for 4 mm head cables, so standard 4 mm plug leads connect the components, meters and rheostat. Order extra leads if your laboratory does not already have enough for each group.

Who manufactures the Equipment Kit for Demonstrating Electrical Experiments?
The Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and spare components are handled by the manufacturer directly.

Are calibration certificates available for the meters?
Whether calibration certificates can be provided for the meters in the Equipment Kit for Demonstrating Electrical Experiments (SCL-367/017) should be discussed with us before you order. Mention it in your enquiry so that the quotation can cover your requirement.

Request a Quote

Ask for a quotation on this electrical experiments kit through the contact page, or add it to the enquiry cart with any spare components you need. Quotes are issued by the manufacturer itself.

Last updated: 24 September 2026

Galvanometer Kit (Product Code: SCL-365/018) is a current-measurement kit built around a centre-zero DC galvanometer, used for sensitive current detection, bridge balancing and wire-resistance experiments in school and college physics labs. Its 30-0-30 galvanometer reads 20 µA per division and comes with a five-decade resistor box, a 1.5–12 V / 3 A supply and digital meters. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Galvanometer Kit Used For?

A centre-zero galvanometer shows both the size and the direction of a small current, which makes it the natural detector for balance methods. With the resistor box and the U-shaped wires, students can set up a Wheatstone bridge and adjust the resistances until the needle rests at zero, then calculate the unknown resistance. The digital ammeter and voltmeter, the 1.5–12 V supply and the rheostat also allow straightforward Ohm's law measurements on the same bench.

For resistivity work, students measure the length of a wire with the metric ruler and its thickness with the diameter gauge, find its resistance, and calculate resistivity from the cross-sectional area. Protect the galvanometer by starting with a high resistance in series and closing the switch only while taking a reading; if the needle swings hard against its stop, open the circuit at once. For schools buying galvanometer apparatus in India or overseas, the kit replaces several separate purchases with one coordinated set.

What to Specify When Ordering

• The number of kits required for your student groups.
• Whether spare flexible cables (50 cm or 100 cm, red and black) should be added.
• Any additional resistor boxes or galvanometers for larger practical batches.
• Your delivery city or country, so packing and freight can be quoted.

OEM Manufacturer

The Galvanometer Kit is an original product of Jain Scientific Equipments Private Limited, which trades as ScienceLab and is its OEM. The kit is assembled at the company's licensed factory at Saha, Ambala, Haryana, India, and dispatched factory-direct to schools, colleges, institutions, dealers and importers.

Buyers who need a replacement galvanometer, extra cables or a repeat batch deal with the maker rather than an agent — ask us. The ScienceLab profile page has more about the company.

Related Laboratory Equipment

Items that pair well with the galvanometer kit:

• Moving Coil Galvanometer — a separate galvanometer for additional benches.
• Resistance Box — an extra resistance box for bridge circuits.
• Screw Gauge — another way to measure wire diameter for resistivity.
• Apparatus for Studying the Dependence of Electrical Resistance on the Factors that Determine it — wires of different gauges and materials for resistance studies.
• Banana/Alligator Cords — additional leads for circuit building.

More electrical apparatus is available in the Laboratory Equipment category.

Frequently Asked Questions

How sensitive is the galvanometer in the kit?
The galvanometer in the Galvanometer Kit (SCL-365/018) is a DC 30-0-30 centre-zero instrument with a sensitivity of 20 µA per division, so it detects small currents in either direction and suits null-point and bridge experiments.

What values does the resistor box provide?
The resistor box in the Galvanometer Kit (SCL-365/018) has five decades: 10 × 0.1 Ω, 10 × 1 Ω, 10 × 10 Ω, 10 × 100 Ω and 10 × 1000 Ω, letting students set resistance in small steps for bridge and Ohm's law circuits.

What else is included in the Galvanometer Kit?
Besides the galvanometer and resistor box, the Galvanometer Kit (SCL-365/018) includes a 1.5–12 V / 3 A power supply, a 36 V DC switch, a 22 Ω rheostat, a 0–10 A digital ammeter, a 0–5 V digital voltmeter, 16 flexible cables, four U-shaped wires, banana-type sockets, a metric ruler and a wire diameter gauge.

How should the galvanometer be protected during experiments?
To protect the galvanometer in the Galvanometer Kit (SCL-365/018), start every circuit with a high resistance in series, close the switch only while reading, and open the circuit immediately if the needle swings hard against its stop. Never connect it directly across the power supply.

Who manufactures the Galvanometer Kit?
The Galvanometer Kit (SCL-365/018) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Institutions, dealers and importers buy it directly from the manufacturer.

Is a calibration certificate available for the Galvanometer Kit?
Whether a calibration certificate can be supplied for the galvanometer or the digital meters in the Galvanometer Kit (SCL-365/018) should be discussed with us before ordering. Please raise it on the contact page when you request a quotation.

Can the Galvanometer Kit be ordered in bulk or for export?
Yes. The Galvanometer Kit (SCL-365/018) is supplied in multi-kit quantities to schools, colleges, dealers and importers in India and international markets. Send the quantity and delivery destination with your enquiry and the manufacturer will prepare a quotation.

Request a Quote

Request a quotation for the Galvanometer Kit on our contact page, or save it in the enquiry cart while you build your list. The manufacturer replies to every enquiry directly.

Last updated: 24 September 2026

Magnetic Kits (Product Code: SCL-363/019) is a classroom kit for magnetism experiments used to introduce magnetic attraction, repulsion and magnetic fields in school science and physics lessons. Teachers use kits of this kind for hands-on group work on how magnets behave, and the exact contents of the current kit should be confirmed with us when you enquire. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Are Magnetic Kits Used For?

Magnetism is usually taught through short, hands-on activities, and a magnetic kit keeps the materials for them together. Typical lessons include showing that like poles repel and unlike poles attract, sorting everyday objects into magnetic and non-magnetic materials, tracing the shape of the field around a magnet, and watching how a compass needle lines up with a nearby magnet or with the Earth's field.

Because syllabuses differ, compare your practical list with the kit contents before you order — we will confirm exactly what the current Magnetic Kits include. Store magnets in pairs with opposite poles together, keep them away from phones, cards and electronic equipment, and avoid dropping them, as rough handling can weaken some magnets. As a magnetism experiment kit for schools in India and abroad, it suits both teacher demonstrations and student group work.

What to Specify When Ordering

• The magnetism activities your syllabus requires, so we can confirm the kit covers them.
• The number of kits needed for your class groups.
• Any separate magnets or plotting compasses you would like quoted alongside.

OEM Manufacturer

Magnetic Kits are an own-brand product of Jain Scientific Equipments Private Limited, which trades as ScienceLab and acts as the OEM. The kits are made up at the company's licensed factory at Saha, Ambala, Haryana, and supplied directly to schools, colleges, dealers and importers. For vendor registration, institutional and tender buyers can note the company's GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49.

Repeat orders and replacement items are handled by the manufacturer itself — ask us. Visit the ScienceLab profile to learn more about the company.

Related Laboratory Equipment

Magnetism items often ordered with the kits:

• Magnet Set — separate magnets for extra student groups.
• Steel Horseshoe Magnet — a strong field between closely spaced poles for demonstrations.
• Plotting Compass, Single Glass Face — for tracing magnetic field lines.
• Bar Magnet (Plastic) — a simple bar magnet for younger classes.

More school science apparatus is listed under Laboratory Equipment.

Frequently Asked Questions

What are Magnetic Kits used for?
Magnetic Kits (SCL-363/019) are used to teach the basics of magnetism in school science and physics, such as attraction and repulsion between poles, magnetic and non-magnetic materials, and the shape of magnetic fields, through teacher demonstrations and student group activities.

What is included in the Magnetic Kits?
Please confirm the current contents of Magnetic Kits (SCL-363/019) with us before ordering. Send your practical list through the contact page and we will check it against the kit, so that the items you receive match the magnetism activities in your syllabus.

How should the magnets be stored?
Magnets used with Magnetic Kits (SCL-363/019) should be stored in pairs with opposite poles together, away from phones, bank cards and electronic equipment. Avoid dropping or heating them, since rough handling can weaken some magnets over time.

Who manufactures the Magnetic Kits?
Magnetic Kits (SCL-363/019) are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools, dealers and importers order them directly from the manufacturer.

Can Magnetic Kits be ordered as class sets or for export?
Yes. Magnetic Kits (SCL-363/019) can be supplied in class-set quantities to schools, colleges, dealers and importers in India and international markets. Share the number of kits and the delivery destination with us to receive a quotation from the manufacturer.

Request a Quote

To get a quotation for Magnetic Kits, write to us through the contact page or add them to the enquiry cart. The manufacturer confirms the contents and quotes you directly.

Last updated: 24 September 2026

Apparatus for Studying the Dependence of Electrical Resistance on the Factors that Determine it (Product Code: SCL-361/020) is a wire-resistance experiment set used to show how a conductor's resistance depends on its thickness and material, in school and college physics practicals. It pairs 24 SWG and 30 SWG conducting wires, plus copper and iron 30 SWG wires, with a 2–14 V AC/DC, 6 A supply and digital meters. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Electrical Resistance Apparatus Used For?

The resistance of a conductor depends on its material, its length and its cross-sectional area, and this set lets students isolate those factors one at a time. Comparing the 24 SWG and 30 SWG conducting wires shows the effect of thickness — the higher SWG number is the thinner wire, with the greater resistance — while comparing copper and iron wires of the same 30 SWG gauge shows the effect of material. For each wire, students apply a voltage from the supply, read current and voltage on the digital meters and calculate R = V/I.

If your syllabus also covers length, the same method is applied to different lengths of one wire. Use the DC output and keep currents modest, because a wire that warms up changes its resistance and spoils the comparison; switch off between readings to let it cool. As an Ohm's law experiment kit for schools in India and international markets, the set leads naturally to the formula R = ρL/A and the idea of resistivity.

What to Specify When Ordering

• The number of sets needed for your practical groups.
• Whether extra wire pairs of a particular gauge or material should be included.
• Whether a screw gauge or resistance box should be quoted for extension work.
• The delivery city or country, for packing and freight.

OEM Manufacturer

This resistance apparatus is produced by Jain Scientific Equipments Private Limited under its ScienceLab brand, making the company its original equipment manufacturer. The set is assembled at the licensed factory in Saha, Ambala, Haryana, India, and schools, colleges, dealers and importers purchase it straight from the manufacturer.

Replacement wires or leads and repeat orders are organised by the factory team itself — ask us. The ScienceLab profile gives more background on the company.

Related Laboratory Equipment

Apparatus that supports or extends the resistance experiments:

• Apparatus for Studying Circuits for Series and Parallel Connections — the companion set for circuit arrangements.
• Ohm's Law Apparatus — the voltage–current relationship behind every resistance reading.
• Screw Gauge — measures wire diameter so the cross-sectional area can be calculated.
• Resistance Box — known resistances for comparison.
• Galvanometer Kit — bridge methods for finer resistance measurement.

Find more electricity apparatus in the Laboratory Equipment category.

Frequently Asked Questions

Which factors affecting resistance can be investigated?
The electrical resistance apparatus SCL-361/020 lets students investigate how resistance depends on wire thickness, by comparing 24 SWG and 30 SWG wires, and on material, by comparing copper and iron 30 SWG wires; different lengths of one wire extend the study to length.

What power supply and meters are included?
The electrical resistance apparatus SCL-361/020 includes a power supply delivering 2–14 V AC/DC rated 6 A, together with a digital ammeter and a digital voltmeter for measuring the current through and voltage across each test wire.

Which wires and leads come with the apparatus?
The electrical resistance apparatus SCL-361/020 supplies 2 pairs of 24 SWG and 2 pairs of 30 SWG conducting wires, 2 pairs each of copper and iron 30 SWG wires, and 4 mm leads in red and black: 2 pairs at 100 cm and 2 pairs at 50 cm.

Why should the current be kept low during readings?
In the electrical resistance apparatus SCL-361/020, a wire carrying a large current warms up and its resistance rises, which distorts the comparison between wires. Keeping currents modest and switching off between readings keeps the results consistent.

Who manufactures this electrical resistance apparatus?
The electrical resistance apparatus SCL-361/020 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is sold factory-direct to schools, colleges, dealers and importers.

What should a quotation request include?
For a quotation on the electrical resistance apparatus SCL-361/020, send the number of sets, any extra wires or leads, and your delivery city or country through the contact page. The manufacturer will reply with a quotation directly.

Request a Quote

Enquire about this resistance apparatus through the contact page or keep it in the enquiry cart until your list is complete. Quotations come from the manufacturer, with no reseller involved.

Last updated: 24 September 2026