DESCRIPTION:
Infusion pump, volumetric, single channel, AC and battery powered, with accessories

SPECIFICATIONS:
Suitable for rail and IV pole mount
Programmable infusion by volume, time and flow-rate
Infusion pump, volumetric, portable, for IV fluids infusion, single channel
Peristaltic pump, continuous delivery
Flow-rate range 1 – 1,200 (minimum guaranteed) ml/h, 1 ml/h step, accuracy ± 5 %
Open system, compatible with commercial infusion sets
Battery autonomy > 5 h (at 30 ml/h)
Air bubble detection
Bolus program, range 100 – 900 ml/h
Volume limit range 1 – 9,999 ml, 1 ml step
KVO program, 1 ml/h for infusion rate < 10 ml/h and 3 ml/h for infusion rate > 10ml/h
Occlusion detection
Automatic self-test function
Battery and AC powered, with automatic switch between modes and automatic recharge when connected to mains
Power consumption 25 W
Integrated battery charger
Sturdy construction, splash- and shock-proof, plastic enclosure
Power requirements 110 – 220 V / 50 – 60 Hz
Display and control panel with visualisation of all working parameters (program, volume, flow, time) and system messages
Audio/visual alarms, with silencing feature, for: occlusion, air-in-line, door open, status and end of infusion/program, battery/power supply status and failure, system errors.

Contact Science Lab for your Educational School Science Lab Equipments. We are best school science lab equipments suppliers in india, school science lab instruments, school science lab instruments exporter, school science lab instruments manufacturer, school scientific equipments, science educational equipment

DESCRIPTION:
Patient vital signs monitor, 5 physiological parameters, for adult ,paediatric/infant and neonatal patients, AC and battery powered, with a ccessories

SPECIFICATIONS:
5-parameters monitoring: ECG and Heart Rate (HR), Respiratory Rate (RR), SpO2, NIBP and Temperature
Portable vital signs monitor, suitable for adult, paediatric andneonatal patients

ECG and HR:
accuracy ± 1 bpm or ± 1%, whichever is greater
3-leads ECG, I-II-III selection (optional 5-leads I, II, III, aVR, aVL ,aVF, V)
waveform visualisation
S-T detection, arrhythmia analysis
standardising marker -1 to 1 mV or -2 to 2 mV (depending on the available model)
HR 15 – 300 bpm for adult and 15 – 350 bpm for paediatric/neonatal
gain 1.25, 2.5, 5, 10, 20, 40 mm/mV and Auto
sweep speed 6.25, 12.5, 25 and 50 mm/s

Respiratory rate (RR):
Resolution 1 rpm
Accuracy ± 2 rpm or ± 2% in the range 7 – 150 rpm, whichever is greater
RR range 0 – 120 adult, 0 – 150 paedriatric/neonatal

NIBP:
Measurement overall ranges (min. value diastolic, max. value systolic)
Oscillometric step deflation
Adjustable inflating pressure
10 – 270 adult, 10 – 200 paediatric, 10 – 135 neonatal
Systolic, diastolic and mean pressure measurement
Resolution 1 mmHg

SpO2:
Resolution 1%, accuracy ± 2% in the range 70 – 100 %
Range 0 – 100%
Heart rate detection 25 – 250 bpm, accuracy ± 3 bpm or ± 2%, whichever is greater

Temperature:
resolution ± 0.1 ºC
range 0 – 50 ºC
accuracy ± 0.1 ºC

Adjustable signal amplitude and sensitivity
TFT colour display > 10.4 inches
Audio-visual alarms and silencing feature for all monitored parameters
Display reports alarms, system errors, leads and sensors failure and AC/battery status
Multi-waveform and parameters visualisation, at least 4 channels
Defibrillator sync and protection
Trend display > 120 hours at 1 min resolution
Data and network interface
Robust design for use in demanding environment
Pacemaker detection/rejection
Patient information and trend internal database
Power requirements: 100 - 220 V / 50 Hz
Soft touch keys, durable and easy to clean surface, resistant tohospital-grade cleaning products
Automatic self-test and continuous system monitoring
Built-in rechargeable battery, autonomy > 3.5 hours
Automatic switch to battery in case of power failure, automatic recharge on connection to mains
Suitable for standard bed/wall rail and pole stand mount.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

DESCRIPTION
Face mask to provide oxygen at flow rates between 1 – 10 LPM. Allows for precise oxygen delivery by utilizing different sized port to change FiO2 (24 – 50%). Also known as air-entrainment masks able to provide total inspiratory flow at a specified FiO2.

SPECIFICATIONS
Material: mask and tubing made from medical grade PVC
The mask has an adjustable nose clip and an adjustable strap to esnure the mask can be fitted securely.
Length of the oxygen tube: 1.5 to 2.1m
It delivers oxygen, with a specific concentration from 24% to 50% minimum "
The kit of the mask includes the tubing, humidity cup and multiple jets, which are color-coded and indicating the percentage of oxygen.
Single use, non-sterile item.
Adult size
FiO2 ranges 24% (4 LPM), 28 % (4 LPM), 31% (6 LPM), 35% (8 LPM), 40% (8 LPM), 50% (10 LPM
Anti-crush tubing is terminated with a “standard” connector

ENVIRONMENTAL CONDITIONS
Storage conditions: 0 to 50 deg. C, 10 to 90% relative humidity, non-condensing
Operating conditions: 5 to 40 deg. C, 10 to 90% relative humidity, non-condensing

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational equipments manufacturers, technical educational equipments manufacturer, technical educational equipments supplier, technical educational instruments, technical educational instruments exporter, technical educational instruments manufacturer, vocational training lab instruments exporter.

DESCRIPTION:
Flow splitter for oxygen delivery, 5 outlets and 1 inlet, with independent flowmeters

SPECIFICATIONS:
5 flowmeters, range 0.125 – 2 l/m
5 outlets oxygen flow splitter, to be connected to a single oxygen supply/concentrator
Independent outlets (the cumulative maximum flow is limited by the supply flow)
Suitable for tabletop or wall mount
Input pressure 48 – 345 kPa

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational instruments supplier, technical institute lab equipments, technical lab equipments manufacturers, top lab equipments manufacturers, tvet lab equipment manufactruers, vocational training lab equipments exporter, vocational training lab equipments manufacturers.

DESCRIPTION
A sealed bottle of water inserted into a breathing circuit to add moisture to the breathing gases for administration to a patient. This type of humidifier does not heat the gas.

TECHNICAL SPECIFICATIONS
Graduation shall show minimum and maximum water level.
Detachable metal or rigid durable polymer cap with gas connectors.
Non-heated, reusable humidifier for oxygen therapy and ventilation/anaesthesia inspiratory lines.
Bubble-through humidification system.
Graduated, transparent humidification bottle, shatter resistant.
DISS connectors for gas inlet and outlet
All available adaptors for gas connection to be described in bid response
Flow rate capacity up to 15 L/min.
Safety pop-off valve incorporated
Cap and connectors made of brass/steel/other biocompatible metal or polymer certified for medical use.
Bottle and tubes made of polymer certified for medical use, shatter resistant.
Autoclavable and/or disinfectable with hospital grade detergents.
Humidification chamber working volume at least 150 ml, not greater than 500 ml.

ENVIRONMENTAL CONDITIONS
Storage conditions temperature: -20 °C to 60°C / RH: 15% - 90%
Operating conditions temperature: 5 to 45°C / RH: 15 to 90%

Contact Science Lab for your Educational School Science Lab Equipments. We are best science educational equipments, science educational instruments, science lab equipments manufacturer, science laboratory instruments exporter, scientific educational equipments, scientific educational lab equipment.

DESCRIPTION
Hand held, battery powered device that measures the oxygen concentration in a flow of gas from a medical gas source or, with adapters, through a medical gas-flow device such as a ventilator or anaesthesia system. The intended application is checking gas supply equipment performance.

TECHNICAL SPECIFICATIONS
Operational Characteristics
Ultrasonic oxygen sensing technology, with permanent sensing chamber.
O2 measurement to include the range 21 - 96 %.
Hand-held oxygen analyzer for spot-check or continuous measurement of the oxygen concentration from a medical gas source.
Flow rate accuracy within ± 3 %
Flow rate resolution 0.1 LPM
Response time < 30 s.
Warm-up time < 15 s.
O2 accuracy: within ± 3 %.
Flow rate measurement: up to at least 10 LPM
Suitable for measuring gas supply with pressure up to 50 psi.
O2 resolution: 0.1 %.
Self-calibration in typical conditions of use.
Display visualizing O2 concentration, flow rate, system messages and battery status.

Electrical characteristics
Battery life > 250 hours continuous use.
Automatic power-off when not in use.
Operated by battery power supply.
2 x AA alkaline replaceable single use batteries.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific educational lab equipments, scientific equipments manufacturers, scientific lab equipment manufacturers, scientific lab plasticware, scientific laboratory equipment manufacturer, scientific laboratory equipment supplier

DESCRIPTION
Medical gas flow meter to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 15 LPM, for medical oxygen.

TECHNICAL SPECIFICATIONS
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Pressure compensated design to give specified accuracy for whole range of input pressures
Maximum flow rate when fully opened: 50 L/min 
Adjustment knobs to have rough surface to prevent slipping.
Built-in inlet filter 

OXYGEN Model:
0 - 15 L/min, accuracy 10%, tube gradation max 0.5 L/min at low flow, max 1 L/min high flow

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

Specifications:
Material: Austenitic steel (non-quenched, non-magnetic steel).
Depressor spatula, rectangular with rounded ends.
Austenitic steel composition: 16 to 18% chromium; 10 to 14% nickel; 2 to 3% molybdenum.
Size approximately 25 x 250mm.

Safety process:
This item must be cleaned, disinfected after each use, and sterilised in a steam steriliser.

Instructions for use:
Used to hold open fatty tissue, muscle or viscera after an abdominal incision.

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational equipments manufacturers, technical educational equipments manufacturer, technical educational equipments supplier, technical educational instruments, technical educational instruments exporter, technical educational instruments manufacturer, vocational training lab instruments exporter.