Suction Pump Surgical 2 Bottles w/access (Product Code: SLE/HE/03) is an electrically operated suction unit used to aspirate secretions, pus, blood and irrigating fluids during minor surgery, medical interventions and resuscitation in hospitals and clinics. Theatre and ward teams choose this model for its two transparent collection jars of at least 2 litres each and user-adjustable suction from 0 to at least 600 mmHg. It is supplied, complete with an accessory kit, by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Suction modes | Intermittent and continuous |
| Collection jars | Two; transparent, shatterproof, clearly graduated; at least 2 litres each |
| Jar reprocessing | Fully autoclavable at 121 °C (reusable) |
| Suction range | User adjustable, 0 to at least 600 mmHg (800 mbar) |
| Aspiration capacity | At least 60 L/min as listed (the listing also quotes 2.4 m³/h – please confirm on the quotation) |
| Vacuum gauge | Indicates the negative pressure generated (kPa or mmHg) |
| Pump | Piston(s) needing little or no oil; maintenance-free operation |
| Pump protection | Bacterial filter in the airline to the pump; provision that stops fluid flowing to the pump when a jar is full |
| Controls | Vacuum control and on/off switch on the casing; foot switch for suction control |
| Suction tube | At least 1.5 m, medical grade silicone, autoclavable at 121 °C |
| Noise level | Does not exceed 60.5 dB during operation |
| Stand | Stable, portable; castors at least 75 mm, 360-degree swivel, anti-static and lockable |
| Body | Stainless steel, or non-corrosive material / corrosion-resistant coating; sturdy, shock-resistant casing with smooth, easy-to-disinfect surfaces |
| Power supply | 100–110 V / 60 Hz or 220–240 V / 50 Hz versions, or both |
| Power consumption | Not more than 200 W |
| Product code | SLE/HE/03 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Accessories, supplies and consumables included:
In the operating theatre the pump clears blood and irrigating fluid from the surgical field, and on the ward or in recovery it removes secretions from a patient’s airway during resuscitation. The vacuum control sets the suction level, the gauge shows the negative pressure being applied, and the foot switch lets the operator start and stop suction without taking hands off the patient.
The second jar adds collection volume for procedures that produce more fluid, and the overflow provision stops liquid reaching the pump if a jar fills. After use, the jars and silicone tubing go through the autoclave at 121 °C, a fresh anti-bacterial filter is fitted from the spares, and the smooth casing is wiped down. Lockable anti-static castors let staff move the unit between theatre and ward and park it securely.
Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this two-jar surgical suction pump from Ambala, Haryana, as part of its hospital and operating theatre range. Known to many institutions as a laboratory equipment supplier in India, the company quotes hospitals, clinics and health projects for the pump, its accessory kit and any extra spare filters they want to stock. Read about the company on our company profile page.
Theatres and wards that run an electric suction unit often order these items with it:
Browse the full Resuscitation & Operating Theatre Equipment category.
What is included with the Suction Pump Surgical 2 Bottles w/access?
The Suction Pump Surgical 2 Bottles w/access comes with two collection jars and an accessory kit: a spare collection bottle with cover, gasket and overflow valve, ten spare anti-bacterial inlet filters, two silicone tube sets, two bi-conical connectors, two spare jar seals, spare fuses where applicable and English instructions.
How strong is the suction of the Suction Pump Surgical 2 Bottles w/access?
The Suction Pump Surgical 2 Bottles w/access has user-adjustable suction from 0 to at least 600 mmHg (800 mbar), read on a built-in negative-pressure gauge. Its listed aspiration capacity is at least 60 L/min; please confirm the flow figure on your quotation, as the listing also gives 2.4 m³/h.
Can the jars and tubing be sterilised?
Yes. The collection jars of the Suction Pump Surgical 2 Bottles w/access are fully autoclavable at 121 °C and reusable, and its medical grade silicone suction tube is also autoclavable at 121 °C. Replace the bacterial filter in the pump airline from the spare filters supplied.
Which power supply does the Suction Pump Surgical 2 Bottles w/access need?
The Suction Pump Surgical 2 Bottles w/access is available in 100–110 V / 60 Hz or 220–240 V / 50 Hz versions, or both, and consumes no more than 200 W. State the mains supply at the place of use when you ask for a quotation.
Is a calibration certificate available for the vacuum gauge?
Ask us before ordering. Whether a calibration certificate or test report can be provided for the vacuum gauge of the Suction Pump Surgical 2 Bottles w/access depends on the supply, so raise it through the contact page and we will tell you what documents are available.
Who supplies the Suction Pump Surgical 2 Bottles w/access?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Suction Pump Surgical 2 Bottles w/access to hospitals, clinics, health programmes and distributors in India and international markets, and prepares quotations for single units or multi-site orders.
To get a quotation for the Suction Pump Surgical 2 Bottles w/access, send the quantity, your mains voltage and the delivery location through our contact page, or add the pump to the enquiry cart together with other theatre items.
Last updated: 24 September 2026
Hard Surface Football, Size 3 (Product Code: SLE/PE/011) is a size 3 rubber football used for kicking, dribbling and small-sided games by children up to 7 years of age on asphalt, concrete and gravel playgrounds. It is approximately 18 cm in diameter, made from 100% rubber around a rubber carcass/butyl bladder, and its panels are hand stitched. The ball is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for pre-primary and primary schools.
| Parameter | Detail |
|---|---|
| Size | Official game size number 3 |
| Diameter | Approximately 18 cm |
| Material | 100% rubber |
| Bladder | Rubber carcass/butyl |
| Finishing | Panels hand stitched |
| Playing surfaces | Multiple hard surfaces such as asphalt, concrete and gravel |
| Age group | Children up to 7 years of age |
| Product code | SLE/PE/011 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Many schools do not have a grass pitch, and a normal football scuffs quickly on tarmac or concrete. A rubber ball built for hard surfaces gives young children a football they can use every day in the playground: first touches with the inside of the foot, stopping a rolling ball, dribbling around markers, and short shots at small goals.
The smaller size 3 ball is easier for young legs to control and less intimidating than a full-size ball, which keeps early games focused on fun and technique. Check the ball’s pressure before each lesson, brush or rinse off grit after play on gravel, and keep it indoors between sessions so the rubber is not left in strong sun.
Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, supplies this hard surface football from Ambala, Haryana, to schools and early-years programmes that need durable playground equipment. The ball can be ordered with a pump, markers and softer balls for the youngest children so that one delivery equips the whole play area. Company information is on our company profile.
Useful additions for playground football with young children:
Our Physical Education category lists the rest of the range.
What size is the Hard Surface Football, Size 3?
The Hard Surface Football, Size 3 is an official game size number 3 football, approximately 18 cm in diameter. Size 3 is the smaller ball commonly chosen for young children, who find it easier to kick and control than a full-size football.
Which surfaces can the size 3 football be used on?
The Hard Surface Football, Size 3 is designed for use on multiple hard surfaces such as asphalt, concrete and gravel. This makes it practical for schools whose only play area is a paved yard or a gravel ground.
What age group is the football for?
The Hard Surface Football, Size 3 is intended for children up to 7 years of age. For toddlers and pre-schoolers who are not yet ready for football, a small soft ball such as the Ball, Rubber/Foam may be a better starting point.
What is the Hard Surface Football, Size 3 made of?
The Hard Surface Football, Size 3 is made from 100% rubber, with a rubber carcass/butyl bladder, and its panels are hand stitched. The all-rubber outer is what allows it to be used on rough hard surfaces.
Who supplies the Hard Surface Football, Size 3?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, supplies the Hard Surface Football, Size 3 to pre-schools, primary schools, education programmes and dealers in India and international markets.
What details should a quotation request include?
For the Hard Surface Football, Size 3, include product code SLE/PE/011, the number of balls, whether a pump is required and the delivery location. Send the request through our contact page for a prompt quotation.
Ask for a quotation on the Hard Surface Football, Size 3 through our contact page, or add it to the enquiry cart alongside the other playground equipment you need.
Last updated: 24 September 2026
Basketball, Professional Size (Product Code: SLE/PE/012) is a full-size orange rubber basketball used for dribbling, passing, shooting and match play in school and college physical education. It has a circumference of 75–78 cm and weighs 600–650 g, with an 8-panel rubber casing over a seamless, nylon-wound butyl bladder, and it is suitable for all types of playgrounds. Delivered deflated with two non-return inflating needles, it is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Size | Professional/official size |
| Circumference | 75–78 cm |
| Ball weight | 600–650 g |
| Outer casing | Rubber, 8 panels |
| Bladder | Butyl, nylon wound, seamless |
| Valve | Non-return valve |
| Colour | Orange |
| Playing surface | Suitable for all types of playgrounds |
| Supplied | Deflated, with two non-return inflating needles |
| Estimated weight / volume (catalogue figures) | 0.730 kg / 2.496 dm³ |
| Product code | SLE/PE/012 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
In a PE lesson the basketball is used for stationary and moving dribbling drills, chest and bounce passes, lay-ups and set shots, followed by small-sided or full-court games. School teams use the same ball for practice and inter-house or inter-school matches, so pupils train with the full-size ball they will play with.
The rubber casing is made for outdoor courts and playgrounds, where it copes better with rough surfaces than an indoor-only ball, and the nylon-wound bladder helps it keep a round shape and a consistent bounce. Inflate it to the pressure printed on the ball, test the bounce before the lesson, and store the balls in a rack or bag rather than on a damp floor.
This professional-size basketball is supplied by Jain Scientific Equipments Private Limited, trading as ScienceLab, from Ambala in Haryana. Secondary schools, colleges and sports programmes can order a single ball for a club or a full set for a PE department, with pumps and bibs quoted in the same reply. Find out more on our company profile.
Items that go with a school basketball programme:
See more in our Physical Education category.
What are the size and weight of the Basketball, Professional Size?
The Basketball, Professional Size has a circumference of 75–78 cm and weighs 600–650 g. This is the full professional/official size, suited to older pupils, school teams and college players.
What is the basketball made of?
The Basketball, Professional Size has an 8-panel rubber outer casing and a seamless butyl bladder that is nylon wound, with a non-return valve. The rubber casing makes it a practical choice for outdoor school courts.
Can it be used on outdoor playgrounds?
Yes. The Basketball, Professional Size is suitable for all types of playgrounds, so it can be used on concrete or asphalt school courts as well as indoor floors. Rinse off grit after outdoor use to keep the grip on the panels.
Is the Basketball, Professional Size delivered inflated?
No. The Basketball, Professional Size is delivered deflated and supplied with two non-return inflating needles. You will need a hand pump; the Inflating-Kit for Balls can be ordered with it if your school does not already have one.
What colour is the basketball?
The Basketball, Professional Size is orange, the traditional basketball colour that players can see clearly against court surfaces and backboards during fast play in PE lessons and matches.
Who supplies the Basketball, Professional Size?
Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab from Ambala, Haryana, supplies the Basketball, Professional Size to schools, colleges, sports programmes and dealers in India and international markets.
How do I get a quotation?
Send product code SLE/PE/012, the number of balls, whether you need a pump and your delivery location through our contact page, and we will reply with a quotation for the Basketball, Professional Size and any extras.
To price the Basketball, Professional Size for your school or club, use our contact page or add it to the enquiry cart together with other PE items.
Last updated: 24 September 2026
Ball, Rubber/Foam, App 10cm diameter (Product Code: SLE/PE/013) is a small hand-sized play ball used for rolling, throwing, catching and early ball-skill games with children aged 2–6 in pre-schools and early-years classrooms. About 10 cm across and made from a hardwearing material in assorted colours, it has a smooth, non-toxic finish and is described as resisting break-up into small pieces. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as a staple of any preschool kit in India.
| Parameter | Detail |
|---|---|
| Diameter | Approximately 10 cm |
| Material | Hardwearing material (rubber/foam, as named) |
| Colours | Assorted – for example red, green, blue, yellow, orange |
| Finish | Material and colouring listed as smooth and non-toxic |
| Age group | Children aged 2–6 years |
| Durability | Material listed as preventing disintegration into smaller pieces under physical force |
| Estimated weight / volume (catalogue figures) | 0.333 kg / 5.911 dm³ |
| Product code | SLE/PE/013 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
For toddlers and pre-schoolers, a small ball is the starting point for almost every movement skill. Children sit in a circle and roll it to each other, practise two-handed catching from a short distance, throw it into a hoop or basket, and chase and stop it with their feet. The assorted colours make simple sorting and listening games possible – “everyone with a blue ball, stand up” – so the same balls also support colour and number learning.
Always supervise young children during ball play, and check the balls regularly, taking any damaged ball out of use. Wipe or wash them with mild soapy water and let them dry before putting them back in the toy store.
Pre-schools, day-care centres and primary schools obtain this play ball from Jain Scientific Equipments Private Limited, which trades as ScienceLab in Ambala, Haryana. It can be ordered in the numbers a class needs, together with the other early-years and PE items in our range. The company profile explains more about us.
Other items for active play with young children:
More options are in our Physical Education category.
What age group is the Ball, Rubber/Foam, App 10cm diameter for?
The Ball, Rubber/Foam, App 10cm diameter is intended for children aged 2–6 years. Its composition and finish are listed as suitable for safe, continued use by this age group in pre-school and early-years play.
What size and colours is the ball?
The Ball, Rubber/Foam, App 10cm diameter is approximately 10 cm in diameter and comes in assorted colours, for example red, green, blue, yellow and orange. If you need a particular colour mix, mention it when you enquire.
Is the ball suitable for very young children?
The listing for the Ball, Rubber/Foam, App 10cm diameter describes its material and colouring as smooth and non-toxic, and states that the material prevents it breaking into smaller pieces under physical force. Adults should still supervise play and remove any damaged ball.
What is the ball made of?
The Ball, Rubber/Foam, App 10cm diameter is made from a hardwearing material, described in its name as rubber/foam. If your tender or purchase specification requires the exact material, ask through our contact page and we will confirm it.
Who supplies the Ball, Rubber/Foam, App 10cm diameter?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab in Ambala, Haryana, supplies the Ball, Rubber/Foam, App 10cm diameter to pre-schools, schools, early-childhood programmes and dealers in India and international markets.
What should a quotation request include?
For the Ball, Rubber/Foam, App 10cm diameter, give product code SLE/PE/013, the number of balls, any colour preference and your delivery location. We will reply to requests sent through the contact page with a quotation.
Order the Ball, Rubber/Foam, App 10cm diameter for your pre-school or class through our contact page, or add it to the enquiry cart with the rest of your early-years equipment.
Last updated: 24 September 2026
Suction Pump Surgical 1 Bottle w access (Product Code: SLE/HE/04) is an electric suction unit used to remove secretions, pus, blood and irrigating fluids during minor surgery, medical interventions and resuscitation in clinics and hospital wards. Its single transparent jar of at least 1 litre and aspiration capacity of at least 16 L/min suit lighter-duty work where a compact pump on castors is enough. It is supplied with an accessory kit by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Suction modes | Intermittent and continuous |
| Collection jar | One; transparent, shatterproof, clearly graduated; at least 1 litre |
| Jar reprocessing | Fully autoclavable at 121 °C (reusable) |
| Suction range | User adjustable, 0 to at least 600 mmHg (800 mbar) |
| Aspiration capacity | At least 16 L/min (1 m³/h) |
| Vacuum gauge | Shows the negative pressure generated (kPa or mmHg) |
| Pump | Operating piston(s) requiring little or no oil; maintenance-free operation |
| Fluid protection | Bacterial filter in the pump airline; provision preventing fluid from reaching the pump when the jar is full |
| Controls | Vacuum control and on/off switch on the casing; foot switch |
| Suction tube | Medical grade silicone, at least 1.5 m, autoclavable at 121 °C |
| Noise level | Not over 60.5 dB in operation |
| Mobile stand | Castors at least 75 mm, fully 360-degree swivel, anti-static, lockable |
| Construction | Stainless steel or non-corrosive / corrosion-resistant coated body; sturdy, shock-resistant casing; smooth surfaces that are easy to clean and disinfect |
| Power | 100–110 V / 60 Hz or 220–240 V / 50 Hz versions, or both; consumption not over 200 W |
| Operating conditions | 10–40 °C, 100% relative humidity (as listed) |
| Storage conditions | 0–50 °C, 100% relative humidity (as listed) |
| Product code | SLE/HE/04 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Accessories and spares supplied with the pump:
Clinics, minor-procedure rooms and wards use the single-bottle pump to keep a wound or airway clear of fluid during small operations, dressings and emergency care. The operator dials the suction level on the vacuum control, watches the gauge, and presses the foot switch to apply suction only when it is needed.
With one jar of at least 1 litre, the pump is emptied and reprocessed more often than a two-jar unit, so staff should check the fill level against the graduations during use. The overflow provision protects the pump if the jar fills, and the jar and silicone tube can be autoclaved at 121 °C between patients. Keep the unit within its listed operating range of 10–40 °C.
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies the single-bottle suction pump from Ambala, Haryana, to clinics, hospitals and health programmes. A quotation can list the pump together with extra consumables such as filters and seals, so a facility can hold its own stock of spares. See our company profile for background on the business.
Items that often go on the same order as a compact electric suction pump:
More items are listed in the Resuscitation & Operating Theatre Equipment category.
How much fluid does the Suction Pump Surgical 1 Bottle w access collect?
The Suction Pump Surgical 1 Bottle w access has one transparent, shatterproof jar with clear graduations and a capacity of at least 1 litre. A spare collection bottle with cover, gasket and overflow valve is included, so one bottle can be reprocessed while the other is in use.
What suction and flow does the Suction Pump Surgical 1 Bottle w access provide?
The Suction Pump Surgical 1 Bottle w access gives user-adjustable suction from 0 to at least 600 mmHg (800 mbar) and an aspiration capacity of at least 16 L/min (1 m³/h), in intermittent or continuous mode, with a gauge showing the negative pressure.
Under what conditions can the Suction Pump Surgical 1 Bottle w access be used and stored?
The Suction Pump Surgical 1 Bottle w access is listed for operation at 10–40 °C and storage at 0–50 °C, with relative humidity given as 100% in both cases. Its piston needs little or no oil and the pump is described as maintenance-free.
How is the Suction Pump Surgical 1 Bottle w access cleaned between patients?
The jar of the Suction Pump Surgical 1 Bottle w access is fully autoclavable at 121 °C, as is its medical grade silicone suction tube. The casing has smooth surfaces for wiping and disinfection, and the bacterial filter in the pump airline is replaced from the ten spares supplied.
Who supplies the Suction Pump Surgical 1 Bottle w access?
Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India supplies the Suction Pump Surgical 1 Bottle w access to hospitals, clinics, NGOs and distributors, both within India and in international markets, and quotes the pump with its accessory kit.
What information does a quotation for the Suction Pump Surgical 1 Bottle w access need?
For a quotation on the Suction Pump Surgical 1 Bottle w access, tell us the quantity, the mains voltage and frequency at the site, any extra filters or tube sets you want, and the delivery address, using the contact page.
Ask for pricing on the Suction Pump Surgical 1 Bottle w access through our contact page, or place it in the enquiry cart with any other clinic equipment you need quoted.
Last updated: 24 September 2026
Light Operating Room Mobile w/access (Product Code: SLE/HE/05) is a mobile halogen surgical light used to illuminate the operating field during procedures in operating theatres, minor-surgery rooms and delivery rooms. It gives homogeneous light of 50,000–60,000 lux at 1 m and runs on AC mains with built-in batteries that take over automatically if the power fails. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for hospitals and health facilities.
| Parameter | Detail |
|---|---|
| Light source | Halogen; single or multiple 24 V halogen bulbs in a single cupola |
| Illuminance | Homogeneous light, 50,000–60,000 lux at 1 m |
| Colour temperature | 4,000 K ± 10% |
| Light field | 0.25 m diameter ± 10% |
| Focus | Focus control |
| Cupola | 45–50 cm diameter, with central handle |
| Mounting | Pole stand with articulated arm; base with swivel castors and brakes |
| Construction | Low centre of gravity, sturdy |
| Vertical range | 180–230 cm |
| Horizontal turning | More than 100 degrees |
| Power source | AC and battery; built-in transformer and batteries with battery indicator |
| Power failure | Automatic switch to battery |
| Mains supply | 220 V / 50 Hz |
| Power consumption | 150–250 W |
| Product code | SLE/HE/05 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A mobile operating light gives the surgical team bright, even light exactly where they are working, and it can be wheeled to whichever table or room needs it. The theatre nurse or surgeon positions the cupola by its central handle, sets the articulated arm within the 180–230 cm vertical range, and adjusts the focus to size the light field over the operating site.
The battery backup matters in facilities with an unreliable mains supply: if the power drops, the light switches to its internal batteries automatically and the indicator shows their state. For day-to-day care, lock the castor brakes before surgery begins, let halogen bulbs cool before touching them, and keep spare 24 V bulbs of the correct type in stock.
Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies this mobile halogen operating light from its base in Ambala, Haryana. It is one of several theatre items the company sources for hospitals, surgical centres and health projects, and a single quotation can bring together lights, tables and suction. More about the company is on the ScienceLab profile page.
Operating theatres that add a mobile surgical light usually look at these items too:
See every item in the Resuscitation & Operating Theatre Equipment range.
How bright is the Light Operating Room Mobile w/access?
The Light Operating Room Mobile w/access gives homogeneous light of 50,000–60,000 lux at a distance of 1 m, with a colour temperature of 4,000 K ± 10% and a light field of 0.25 m ± 10% in diameter.
What happens if the mains power fails?
The Light Operating Room Mobile w/access has a built-in transformer and batteries. If the mains supply fails, the light switches to battery automatically, and a battery indicator shows the charge state so staff know when the light should go back on mains power.
How far can the Light Operating Room Mobile w/access be adjusted?
The cupola of the Light Operating Room Mobile w/access is 45–50 cm across and mounted on a pole stand with an articulated arm. It covers a vertical range of 180–230 cm, turns horizontally through more than 100 degrees and has focus control.
What bulbs does the Light Operating Room Mobile w/access use?
The Light Operating Room Mobile w/access uses a halogen light source with single or multiple 24 V halogen bulbs in one cupola. Ask us for the exact bulb type when you request a quotation, so replacement bulbs can be ordered with the light.
Which accessories come with the Light Operating Room Mobile w/access?
The name Light Operating Room Mobile w/access indicates a version supplied with accessories, but the listing does not itemise them. Please ask us through the contact page for the current accessory list, so the quotation shows exactly what is included.
Who supplies the Light Operating Room Mobile w/access?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Light Operating Room Mobile w/access to hospitals, surgical centres, health programmes and dealers in India and international markets.
Send the quantity, mains supply details and delivery location for the Light Operating Room Mobile w/access through the contact page, or add it to the enquiry cart along with other theatre equipment.
Last updated: 24 September 2026
Light Examination Mobile w/access (Product Code: SLE/HE/06) is a mobile halogen examination light used to light up a patient during examinations, dressings and minor procedures in outpatient rooms, wards and gynaecology clinics. Its single 12 V, 40–50 W lamp gives 40,000–50,000 lux at 0.5 m in a focused 10-degree spot, and the head sits on an adjustable flexible arm. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Light source | Halogen, single lamp 12 V, 40–50 W |
| Illuminance | Homogeneous light, 40,000–50,000 lux at 0.5 m |
| Colour temperature | 3,000–3,600 K |
| Light beam | Spot field of view, 10-degree light beam |
| Head mounting | Pole stand; light head on an adjustable flexible arm |
| Head height range | 100–140 cm |
| Base | 5 swivel castors and 2 brakes; low centre of gravity, sturdy construction |
| Controls | On/off switch; electronic transformer incorporated |
| Power supply | AC powered, 220 V / 50 Hz |
| Power consumption | 40–50 W |
| Product code | SLE/HE/06 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Doctors and nurses wheel the examination light to the couch and bend the flexible arm so the narrow beam falls on the area being examined – a wound, the throat, the skin or the field of a gynaecological examination. The 10-degree spot concentrates the light at short working distances, which is why its output is quoted at 0.5 m rather than the 1 m used for theatre lights.
Set the head within its 100–140 cm height range, switch it on at the lamp’s own switch and keep it at a comfortable distance from the patient, as halogen heads become warm in use. The five-castor base stays steady when moved, and the two brakes hold it in place during the examination. The light is AC powered for 220 V / 50 Hz mains, with no battery listed.
ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the mobile examination light from Ambala, Haryana, to outpatient departments, primary health centres and teaching hospitals. The company quotes directly to institutions and dealers and can combine the light with examination tables and other consulting-room equipment in one offer. Visit our company profile for more about ScienceLab.
Consulting and examination rooms usually pair this light with:
Find more theatre and ward items in the Resuscitation & Operating Theatre Equipment category.
How bright is the Light Examination Mobile w/access?
The Light Examination Mobile w/access produces homogeneous light of 40,000–50,000 lux at 0.5 m from a single 12 V, 40–50 W halogen lamp, with a colour temperature of 3,000–3,600 K and a spot field formed by a 10-degree light beam.
Does the Light Examination Mobile w/access run on batteries?
No battery is listed for the Light Examination Mobile w/access. It is an AC-powered light for 220 V / 50 Hz mains, with an incorporated electronic transformer and an on/off switch, and it draws 40–50 W in use.
How is the Light Examination Mobile w/access positioned?
The head of the Light Examination Mobile w/access is mounted on a pole stand with an adjustable flexible arm, with a height range of 100–140 cm. The base has five swivel castors and two brakes to hold the light in place.
How does it differ from the operating room light?
The Light Examination Mobile w/access is a lighter-duty lamp: one 12 V halogen lamp giving 40,000–50,000 lux at 0.5 m on AC power. The Light Operating Room Mobile w/access is the larger theatre version, with a focusable cupola, output quoted at 1 m and automatic battery backup.
Which accessories come with the Light Examination Mobile w/access?
The listing for the Light Examination Mobile w/access does not itemise the accessories its name implies. Ask us through the contact page for the current accessory list, and for spare 12 V halogen lamps, before you order.
Who supplies the Light Examination Mobile w/access?
Jain Scientific Equipments Pvt Ltd (ScienceLab), based in Ambala, Haryana, India, supplies the Light Examination Mobile w/access to clinics, hospitals, health centres and distributors across India and in international markets.
For a price on the Light Examination Mobile w/access, send the number of lights and the delivery address through the contact page, or add it to the enquiry cart with your examination-room list.
Last updated: 24 September 2026
Electrosurgical Unit w/access (Product Code: SLE/HE/07) is a microprocessor-controlled electrosurgical generator used to cut tissue and coagulate bleeding during major and minor general surgery in hospital operating theatres. It offers mono-polar CUT and COAG modes plus bi-polar COAG at an output frequency of 330–430 kHz, and it stands on a cart with a double-function foot switch. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Application | General surgery, including major and minor procedures |
| Generator | Microprocessor controlled; automatic self-test |
| Outputs | Mono-polar and bi-polar |
| CUT mono-polar | Up to 300 W at 500 ohm / 200 W at 300 ohm, depending on the available model; modes at least pure, blend and hemostasis |
| COAG mono-polar | Up to 120 W / 200 W, depending on the available model; modes at least contact/standard, soft, forced and spray |
| COAG bi-polar | Up to 50 W / 120 W, depending on the available model |
| Output frequency | 330–430 kHz |
| Power setting | Adjustable, with pre-set programs and user-defined procedures |
| Return electrode monitoring | For mono-polar use: automatic monitoring of patient connection; generator stops on bad or lost connection |
| Display | Front display/control panel with working parameters, settings, alarms and errors |
| Controls | Double-function foot switch for mono- and bi-polar output (CUT yellow and COAG blue pedals); hand switch controls, at least for mono-polar |
| Compatibility | Commercial cables and electrodes |
| Cart | 4 anti-static swivel castors (2 with brakes), a drawer and storage for the foot switch |
| Power supply | 220 V / 50 Hz |
| Power consumption | 500–700 W |
| Product code | SLE/HE/07 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Surgeons use an electrosurgical unit to cut tissue and seal bleeding vessels with high-frequency current, rather than relying only on a scalpel and ties. In mono-polar work the current flows from the active electrode through the patient to the return electrode, while in bi-polar work it passes only between the two tips of the forceps, which suits fine coagulation close to delicate structures.
Before surgery, the theatre team places and checks the return electrode, selects a CUT or COAG mode and power level on the front panel or recalls a pre-set program, and lets the unit run its automatic self-test. During the operation the surgeon works from the yellow CUT and blue COAG pedals or from the hand switch. Only staff trained in electrosurgery should operate the unit.
Jain Scientific Equipments Private Limited, which operates under the ScienceLab name, supplies this electrosurgical unit from Ambala, Haryana, to hospitals, surgical training centres and public health programmes. Theatre fit-outs can be quoted as a package, with the generator alongside operating lights, tables and suction pumps. Company details are on our about ScienceLab page.
Operating theatres equipping for electrosurgery often order:
The complete range is in the Resuscitation & Operating Theatre Equipment category.
What output power does the Electrosurgical Unit w/access provide?
Depending on the available model, the Electrosurgical Unit w/access gives mono-polar CUT up to 300 W at 500 ohm or 200 W at 300 ohm, mono-polar COAG up to 120 W or 200 W, and bi-polar COAG up to 50 W or 120 W.
Which modes does the Electrosurgical Unit w/access offer?
The Electrosurgical Unit w/access offers mono-polar CUT with at least pure, blend and hemostasis modes, mono-polar COAG with at least contact/standard, soft, forced and spray modes, and bi-polar COAG. Power is adjustable, with pre-set programs and user-defined procedures.
Does the Electrosurgical Unit w/access monitor the return electrode?
Yes. For mono-polar use the Electrosurgical Unit w/access has a return electrode safety system that automatically monitors the patient connection and stops the generator if the connection is poor or lost. It also runs an automatic self-test and shows alarms and errors on the front panel.
Will the Electrosurgical Unit w/access work with our existing electrodes?
The Electrosurgical Unit w/access is described as compatible with commercial cables and electrodes. Tell us the brands and connector types you already use when you ask for a quotation, so the match can be checked before supply.
What power supply does the Electrosurgical Unit w/access need?
The Electrosurgical Unit w/access runs on 220 V / 50 Hz mains and consumes 500–700 W. It stands on a cart with four anti-static swivel castors, two with brakes, plus a drawer and storage for the foot switch.
Can test or calibration documents be provided?
Output test reports or calibration documents for the Electrosurgical Unit w/access are not listed as standard. If your hospital needs them for acceptance, raise it through the contact page before ordering so we can tell you what documentation is available.
Who supplies the Electrosurgical Unit w/access?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Electrosurgical Unit w/access to hospitals, surgical centres, health programmes and medical equipment dealers in India and international markets.
Request a quotation for the Electrosurgical Unit w/access through our contact page, stating the model power and the accessories you need, or add the unit to the enquiry cart with your other theatre equipment.
Last updated: 24 September 2026