Flow Visualisation is a smoke-tunnel set that makes air-flow patterns visible for aerodynamics and fluid mechanics teaching. It combines a smoke generator, a three-piece tunnel duct with its working section, a CO2 gas bottle with bracket, a pipe and exhaust duct, and 2.5 litres of smoke oil. The set weighs 37 kg net and runs on 100–120 VAC or 220–240 VAC.
| Parameter | Detail |
|---|---|
| Electrical supply | 100–120 VAC, 50–60 Hz or 220–240 VAC, 50–60 Hz |
| Smoke generator | 410 x 180 x 370 mm; 14 kg |
| CO2 gas bottle and bracket | 7.5 kg |
| Smoke tunnel duct | Three pieces including working section; 10.5 kg |
| Pipe and exhaust duct | 2.5 kg |
| Smoke oil | 2.5 litre |
| Weight | 37 kg net; packed about 0.32 m³ and 42 kg |
| Operating conditions | +5 °C to +40 °C; relative humidity 80% below 31 °C, falling linearly to 50% at 40 °C |
| Storage temperature | –25 °C to +55 °C |
| Product code | SLE/EA/07 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Speed from line spacing. Pass smoke through the working section around a streamlined shape. Where the smoke lines crowd together the air moves faster, and where they spread out it slows down. Students who have measured pressures on the Bernoulli's Theorem Demonstration module can now see the same speed changes in air.
Making a jet visible. Lead smoke into the Effect And Jet Flow module mounted on the Modular Air Flow Bench. The class then sees the jet bend onto the wall and flip between walls, and the bench's flexible ducting carries the spent smoke away.
Setting up and packing away. Join the three duct pieces on a firm bench and run the pipe and exhaust duct to a window or extraction point. Check the smoke oil level before switching on. At the end, switch off the generator, close the CO2 bottle and store the duct pieces clean and dry.
Smoke released continuously from one point traces a streakline. In a steady flow, streaklines, pathlines and streamlines are the same lines, so the smoke shows the streamlines directly. In unsteady regions, such as the wake behind a blunt body, the three differ, so read those patterns with care.
Close the bottle valve first. Then release any pressure left in the connecting pipe before you disconnect anything. Keep the bottle clamped upright in its bracket and store it away from heaters and direct sun between sessions.
Smoke and any released CO2 should leave the room rather than build up. CO2 is heavier than air and can collect near the floor of a closed room. Run the exhaust duct to a window or extraction point, and keep students from breathing smoke at the outlet.
Use the smoke oil supplied with the set, which is listed as 2.5 litres, or the same type when you refill. A different fluid can give thin or patchy smoke and may leave residue inside the generator. Keep the oil container closed and labelled.
Operate it between +5 °C and +40 °C. Relative humidity may be up to 80% below 31 °C, falling linearly to 50% at 40 °C. Store the set between –25 °C and +55 °C, with the duct pieces kept dry.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026