Science lab equipment for complete laboratory orders is grouped on this page the way a lab list is drawn up: class sets for several benches, items counted per student, shared instruments, preparation-room equipment and spill kits. Schools, colleges and institutes use it when they equip physics, chemistry and biology rooms together. The burner and metalware class sets, the student dissecting set, the triple beam balance, Searle's apparatus and the Electric Autoclave are made by ScienceLab in Ambala. The stereo microscope, lab coats, goggles and spill kits are supplied by ScienceLab, Ambala.
| Group | What it covers | Example products |
|---|---|---|
| Class sets for five stations | Burners with gauzes, bench mats and tripods, and retort bases, rods and two kinds of clamp, packed as matching sets for five chemistry stations. | Bunsen Burner Kit, Retort Metalware Kit |
| Items counted per student | A PVC-cased set of ten stainless steel dissecting instruments, cotton lab coats in four colours, and polycarbonate goggles with an adjustable strap. | Dissecting Set, Student, Lab Coat, Safety Goggles |
| Shared bench instruments | A mechanical balance reading to 0.1 g without mains power, and a stereo microscope that lights whole specimens from above and below. | Triple Beam Balance, Stereo Binocular Microscope |
| Senior physics practicals | Twin hinged frames with a spirit level and a micrometer head for finding the Young's modulus of brass and steel wires. | Apparatus Young Modulus Searle's |
| Preparation room | An electrically heated aluminium steam steriliser with a pressure gauge and double safety valve, for culture media, glassware and instruments. | Electric Autoclave |
| Spill response | A neutralising mixture with litmus powder, vermiculite, gloves, a dustpan and brush and waste bags, in separate kits for acid and caustic spills. | Acid Spill Clean Up Kit, Caustic Spill Clean Up Kit |
Write separate lists for the physics, chemistry and biology rooms, then mark the items they share, such as stands, balances and safety gear, so nothing is bought twice. Senior classes add apparatus such as Searle's apparatus for elasticity, and a biology room with a preparation area adds the Electric Autoclave for media and glassware.
Put consumables on the same list as the hardware. A heating station needs burner tubing and the odd spare gauze, dissecting sets need fresh scalpel blades, and autoclave loads need indicator tape. Once a spill kit has been used, note it for restocking straight away.
Store the spill kits beside the acid and alkali shelves, where they can be reached at once. Before a burner is lit, check its tubing for cracks and close the air hole, then open it gradually for a blue flame. Before each autoclave run, check the water level and that the safety valve moves freely, and never open the lid until the gauge reads zero.
Start from the number of working stations. The Bunsen Burner Kit and the Retort Metalware Kit each equip five stations, so divide the station count by five. Dissecting sets, lab coats and goggles are counted per student, with a few spares. Balances, stereo microscopes and the autoclave are counted per lab or per preparation room.
A new lab needs every line: class sets, personal items, shared instruments, preparation-room equipment and spill kits. A restocking list starts from a count and a check of what is already there. Replace gauzes whose ceramic centre is damaged and burner tubing that has cracked, top up scalpel blades, and replace any spill kit that has been used.
A bench mat, a tripod, a wire gauze with a ceramic centre and a Bunsen burner joined to the gas tap by tubing. The Bunsen Burner Kit gives five matched sets of the mat, tripod, gauze and burner. Add burner tubing, tongs for lifting hot containers and goggles for each student at the station.
Goggles for every student and lab coats to cover clothing, plus spill kits that suit the chemicals stored. The Acid Spill Clean Up Kit neutralises acids with a mixture containing litmus powder, and the caustic kit uses citric acid for alkalis. Both hold vermiculite, gloves, a dustpan and brush and waste bags, with an instruction sheet and MSDS.
Not checking that the pointer rests on zero with the pan empty, putting chemicals straight onto the pan instead of into a weighed container, weighing a sample while it is still hot or wet, and reading before the beam settles. Seat every poise in its notch and read the beams in turn, starting with the heaviest poise.
Whenever a flammable liquid such as ethanol is warmed, and whenever a steady, gentle temperature matters more than speed. An open flame can ignite the vapour, while a water bath holds a set temperature without a flame. Keep the burner for heating water, evaporating salt solutions and warming boiling tubes held in a clamp.
One enquiry can cover a complete lab list, because ScienceLab, run by Jain Scientific Equipments Pvt Ltd from Ambala, supplies its physics, chemistry and biology lines together. A Bunsen Burner Kit and a Triple Beam Balance can share one quotation with slides and glassware, for single schools and for dealers in 110 countries. See the ScienceLab company profile.
To request a quotation or a catalogue for this range, send the product names, codes and quantities through our contact page or add the items to your enquiry cart.
Last updated: 16 November 2026