Physics lab equipment is set out here by where each piece goes when a laboratory is fitted out, from bench fittings and the teacher's demonstration bench to mechanics class sets, a sound station, optics benches, static electricity and the walls. Schools and colleges use it to plan a new physics room, or to re-equip an old one zone by zone. Every piece linked from this page is made by ScienceLab in Ambala.

Physics apparatus by where it goes in the lab

GroupWhat it coversExample products
Bench fittings and supportsPulleys that clamp to a bench edge or support rod to carry a string and hanging mass, and a steel bracket on a stand rod from which several pendulums hang, each set by its own thumbscrew.Pulley, Rod & Bench Mounting, Pulley, Bench Mounting, Ball Bearing, Pendulum Clamp
Teacher's demonstration benchPieces a whole class watches at once: a large gas model with moving polystyrene balls, an apparatus showing that water is densest at 4 °C, and a motor-driven demonstrator of forced oscillation and resonance.Kinetic Theory Model, Hope's Law Apparatus, Forced Oscillation and Resonance Demo
Mechanics class setsItems bought in numbers for group work: low-friction ABS trolleys with velcro pads for inelastic collisions, pairs of three-wheeled wooden trolleys whose spring rod sets up recoil runs, and double pulley blocks for mechanical advantage.Dynamics Trolley, Plastic, Dynamics Trolley, Wooden, Pulley, Metal, Double
Sound and vibration stationSonometers on long wooden resonance boxes for the laws of vibrating strings, four steel forks on one box for building a major chord, and telescoping metal tubes that set the length of an air column.Sonometer, Simple Pattern, Tuning Fork on Resonance Box, Resonance Apparatus with Brass Tube
Optics benchesA wooden bench with millimetre divisions, lamp housing and screens, a non-twisting aluminium alloy bench set with a raybox, and lens holders on their own bases in packs of five.Optical Bench Kit, Optical Bench Set, Lens Holder with Base
Static electricityFriction rods in brass/ebonite, nylon and Perspex for charging by rubbing, and a Van de Graaff generator worked by its hand crank or from a laboratory DC supply.Friction Rod, Brass/Ebonite, Friction Rod, Perspex, Van de Graaff Generator
Wall displayA large chart, readable by a whole class, that sets out the electromagnetic spectrum by wavelength and frequency and comes with an explanatory sheet.Electromagnetic Spectrum Chart

Fitting out a physics laboratory zone by zone

Fix the benches first. Decide which benches will take mechanics work, then check their edges and support rods against the brackets of the rod and bench pulley and the ball-bearing bench pulley before any class set is counted. Fit a pendulum clamp to a retort stand rod at the same benches, so pendulum timing and pulley work share one set of supports.

Give the long apparatus a permanent home. Sonometers and optical benches need a clear, level run of bench top, and optics belongs at the end of the room that can be darkened. The teacher's bench needs a low-voltage AC supply within reach for the Kinetic Theory Model, never a mains socket, and a clear space around the Van de Graaff Generator, away from students' leads and meters.

Plan the store alongside the benches. Trolleys, pulley blocks, lens holders and friction rods go back into labelled trays after each lesson, and the static electricity drawer is kept dry, because damp air lets charge leak away. Hang the spectrum chart where every bench can read it.

Frequently Asked Questions About Physics Lab Equipment Manufacturer Ambala

How can a physics lab be equipped in stages over several terms?

Start with what every week's lessons need: bench pulleys, stands, trolleys and an optical bench for each group. Add the sound station and the demonstration pieces as the syllabus reaches waves, kinetic theory and resonance. Lens holders can follow in packs once the optical benches are in use, and friction rods of different materials can be added when static electricity is taught.

Which demonstration pieces work by hand, and which need a supply or light source?

The Demonstration Motor AC/DC is turned by its hand wheel, and the Van de Graaff Generator runs from its hand crank or a laboratory DC supply. The Kinetic Theory Model needs a low-voltage AC supply, and the forced oscillation demonstrator's power source is not included. The optical benches carry their own lamp housing or raybox, but neither lists a power supply, so plan one per bench.

How should the apparatus be stored so that sets stay complete and benches stay true?

Lay optical benches flat on a shelf rather than standing them on end, so they stay straight. Slacken sonometer wires a little after use, and return lenses, holders and friction rods to labelled trays. Count pulleys, trolleys and masses back into their boxes, and keep a contents list in each box so a missing part is noticed before the next class.

What should be measured in the room before the long apparatus arrives?

Measure the benches. Sonometers on their resonance boxes and the optical benches need a clear, level stretch of bench top, and trolley runs need a straight length with room to stop at the end. Check the bench-edge thickness and support-rod diameter against the clamp sizes on each pulley's page, and find which end of the room can be darkened for optics.

What is the end correction in an air column resonance experiment, and why is it needed?

The air column holds a stationary longitudinal wave, and its antinode forms a little beyond the open end, so the column behaves as if slightly longer than the length measured. That extra length is the end correction. Using two resonance positions and their difference, which is half a wavelength, removes it from the calculation of the speed of sound.

Which mistakes spoil readings at the sound station?

The commonest is taking the gap between two resonance positions as a full wavelength, when it is half of one. Background noise hides a faint resonance, so work in a quiet room and strike forks on a rubber pad, never on the bench. On the sonometer, move the bridge slowly near resonance and repeat each reading before averaging.

Neighbouring physics pages and how they differ

  • Laboratory: the parent Laboratory hub, which sends bench jobs such as heating, weighing and clamping to their own sub-ranges and holds this page as its physics landing page.
  • Physics Lab Equipment: the main physics catalogue by topic, which adds the supplied meters, power supplies, electron tubes and energy kits to apparatus like that shown here.
  • Physics Lab: the practical-exam range, where each student works through set experiments such as Newton's law of cooling, the glass slab and the Wheatstone bridge, while this page plans where apparatus goes in the room.
  • Electricity & Magnetism: the electricity and magnetism section, with circuit kits, meters, supplies and induction apparatus for the electrical benches of a physics room.
  • Heat: the heat range, where conduction races, radiation cans, calorimeters and Stirling engines carry heat teaching well beyond the single Hope's law demonstration here.
  • Physics STEM Kits Manufacturer and Supplier Ambala: hands-on physics kits for group activities, the companion landing page to this one, where each box holds the parts for a run of lessons.

To request a quotation or a catalogue for this range, send the product names, codes and quantities through our contact page or add the items to your enquiry cart.

Last updated: 16 November 2026

You have't any product in this category

Request A Catalogue

Request A Catalogue

Request our catalogue of educational and scientific lab equipment.

Request Now
Supply of Physics Lab Equipment Manufacturer Ambala from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe