Three Angle Bosshead Manufacturer,Supplier and Exporter in India

Three Angle Bosshead (Product Code: SLE/BH/12) is a duraluminium rod connector used to join support rods at 90°, 180° and 270° positions in multilevel and three-dimensional laboratory constructions. Engineering, physics and research labs choose this lab stand clamp boss head when a frame must branch in three directions from one node, and it is catalogued in two versions, for d/Ø 9-13 and d/Ø 19-23. ScienceLab is the OEM: Jain Scientific Equipments Pvt Ltd (ScienceLab) makes it at its own factory in Ambala, India.

Specifications

What Is the Three Angle Bosshead Used For?

Ordinary bossheads join two rods in one plane. When a rig has to grow in three dimensions — a cube-like frame around a reaction vessel, a multilevel support carrying a flask on one tier and a condenser on the next, or a demonstration structure for engineering students — a connector that accepts rods at 90°, 180° and 270° saves stacking several bossheads at the same point. Fewer joints mean a stiffer frame and less slipping under load.

Pick the version that matches your rods: d/Ø 9-13 for lighter frameworks and d/Ø 19-23 for heavier, larger structures. Build from the base upward, tighten each joint before adding the next level, and check the frame for squareness once it carries weight. Duraluminium, an aluminium alloy valued for strength at low weight, keeps even a complete lab setup of rod frameworks manageable to move and re-arrange.

What to Specify When Ordering

• The version: d/Ø 9-13 or d/Ø 19-23, matched to the rods in your frame (the listing gives no unit, so send your rod diameter).
• How many connectors each frame needs and how many frames you are building.
• Any rods, bases or other bossheads to be quoted together for the complete structure.

OEM Manufacturer

ScienceLab is the OEM (original equipment manufacturer) of the Three Angle Bosshead. Jain Scientific Equipments Private Limited, which trades as ScienceLab, produces it at its own licensed factory at Saha, Ambala, Haryana, India, rather than sourcing it from a trader. Research labs, institutions, dealers and importers buy it factory-direct, and repeat orders or replacement screws are handled by the manufacturer itself — just ask us. Read the company profile for more about the company.

Related Laboratory Equipment

Useful companions when planning a three-dimensional rod structure:

• Squared Bosshead — a stainless right-angle node for rods crossing in two directions.
• Bosshead Aluminium — a lightweight standard bosshead for simpler joints in the same frame.
• H-Frame Complete — a cast iron frame base with rods to start the structure from.
• Rods For Stand Bases — stainless rods in several lengths for each level.
• Foot For Rods — a cast iron foot to stand an upright rod on the bench.

Explore more connectors in the Bosshead category.

Frequently Asked Questions

What does "three angle" mean on the Three Angle Bosshead?
The Three Angle Bosshead provides clamping positions at 90°, 180° and 270°, so rods can branch in three directions from a single joint. One duraluminium connector can therefore replace several stacked bossheads at the corners and crossings of a multilevel or three-dimensional rod frame.

Which version of the Three Angle Bosshead should I order?
Order the Three Angle Bosshead version that matches your rods: one is catalogued for d/Ø 9-13 and the other for d/Ø 19-23, both with thread 4. The listing does not state the unit, so send your rod diameter through the contact page and ScienceLab will confirm the correct version.

Is the Three Angle Bosshead strong enough for loaded frames?
The Three Angle Bosshead is described as suitable for multilevel and three-dimensional constructions because of its strength, and duraluminium keeps large frames light to move. For unusually heavy apparatus, share the load and frame layout with ScienceLab before ordering so the right version can be advised.

Who manufactures the Three Angle Bosshead?
The Three Angle Bosshead is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations, repeat orders and replacement screws instead of going through a trader.

How should a Three Angle Bosshead be maintained?
Keep the Three Angle Bosshead clean and free of grit around its screws, and avoid over-tightening, which can mark softer aluminium alloys. When a duraluminium frame is dismantled, store the connectors together with their screws so each three-direction joint can be rebuilt quickly for the next setup.

What should a quotation request for the Three Angle Bosshead include?
A quotation request for the Three Angle Bosshead should give the code SLE/BH/12, the version (d/Ø 9-13 or 19-23), the quantity and the delivery location. ScienceLab quotes directly as the manufacturer for institutions, dealers and importers in India and international markets.

Request a Quote

To price the Three Angle Bosshead in either version, contact ScienceLab or add it to the enquiry cart with the rods and bases for your structure. Quotations come straight from the manufacturer.

Last updated: 24 September 2026