Solar H2 Ready-To-Go (Product Code: SLE/PHY/210) is a complete hydrogen and fuel cell experiment set used to build and examine a solar-hydrogen cycle in the science classroom. Teachers choose it because it lets students compare PEM fuel cells with an ethanol fuel cell, and every ancillary part, down to two digital multimeters, travels in one aluminium suitcase. This solar energy science kit is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Kit type | Fuel cell and hydrogen technology experiment set from the Ready-to-go series, with all ancillary equipment included |
| Energy chain demonstrated | Solar module → electrolyzer → hydrogen storage → fuel cell (solar-hydrogen cycle) |
| Solar module | 2.5 V, 420 mA |
| Fuel cells | 3 x PEM fuel cell module and 1 x solar ethanol fuel cell module |
| Hydrogen generation and storage | Electrolyzer module 2.0, H2 Charger, H2 Storage with valve, gas storage module |
| Measuring instruments | 2 x digital multimeter; potentiometer module for load variation |
| Load and light source | Motor module without gear with propeller; lamp with table clamp |
| Case | Aluminium suitcase with H2 Ready-to-go insert |
| Experiments covered | What an electrolyzer does; characteristics of the electrolyzer, PEM fuel cell and ethanol fuel cell; Faraday and energy efficiency of the electrolyzer and PEM fuel cell; hydrogen production with the H2 Charger; hydrogen storage with H2 Storage; parallel and series connection of PEM fuel cells; setting up the electrolyzer and the fuel cells |
| Product code | SLE/PHY/210 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
Complete list of components:
The Solar H2 Ready-To-Go is used to show, step by step, how electricity from a solar module splits water in an electrolyzer, how the hydrogen is charged and held in storage, and how fuel cells turn it back into electrical energy to drive a motor and propeller. Students measure the working principle, efficiency and characteristic curves of both the electrolyzer and the fuel cells, which makes the kit a good fit for senior physics and chemistry units on energy conversion.
Because two digital multimeters are included, one group can read voltage and current at the same time while plotting a characteristic curve. The lamp with table clamp lets the solar module work indoors when sunlight is not available, and the three PEM fuel cell modules can be wired in series and in parallel to compare outputs. As a STEM science kit for India and abroad, it suits demonstration lessons as well as small-group practicals.
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a supplier of laboratory and teaching equipment based in Ambala, Haryana. The company sources the Solar H2 Ready-To-Go and supplies it to schools, colleges, training centres and dealers, often packed together with other physics apparatus in one consignment.
Our team can advise on which kit in the renewable-energy range matches your syllabus before you order. Read more on the ScienceLab company profile.
These items fit alongside hydrogen and fuel cell lessons:
More energy and electricity apparatus is listed under Physics Lab Equipment.
What is included in the Solar H2 Ready-To-Go?
The Solar H2 Ready-To-Go includes a 2.5 V, 420 mA solar module, electrolyzer module 2.0, H2 Charger, H2 Storage with valve, gas storage module, three PEM fuel cell modules, an ethanol fuel cell module, two digital multimeters, a lamp with table clamp, motor with propeller, test leads and an aluminium suitcase.
Which fuel cell types can students compare with the Solar H2 Ready-To-Go?
Students can compare PEM fuel cells with an ethanol fuel cell using the Solar H2 Ready-To-Go. The set contains three PEM fuel cell modules, which can be connected in series and in parallel, and one solar ethanol fuel cell module, so characteristic curves of both technologies can be measured side by side.
Does the Solar H2 Ready-To-Go need any extra equipment?
The Solar H2 Ready-To-Go already contains its ancillary equipment, including meters, lamp, test leads and hydrogen storage. Operating liquids for the electrolyzer and the ethanol fuel cell do not appear in the components list, so confirm them with us when you request a quotation.
Who supplies the Solar H2 Ready-To-Go?
The Solar H2 Ready-To-Go is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. ScienceLab sources the kit and supplies it to schools, colleges, laboratories and dealers, and can combine it with other physics apparatus on the same order.
How should the Solar H2 Ready-To-Go be stored between lessons?
The Solar H2 Ready-To-Go should go back into its aluminium suitcase after each lesson, with every module placed as shown on the layout diagram. Follow the info sheet for initial startup when handling the electrolyzer, H2 Storage and fuel cells, and ask us if any handling question remains.
What should a quotation request for the Solar H2 Ready-To-Go include?
A quotation request for the Solar H2 Ready-To-Go should state product code SLE/PHY/210, the number of kits, any extra meters or spare modules you want, and the delivery location. Send it through the contact page or add the kit to the enquiry cart.
Can the Solar H2 Ready-To-Go be supplied in bulk or for export?
Yes, the Solar H2 Ready-To-Go can be quoted for several classrooms at once and for buyers in India and international markets. Share the quantity and destination so ScienceLab can confirm availability, packing and shipping in a written quotation.
To order the Solar H2 Ready-To-Go (SLE/PHY/210), send your quantity and delivery details through the ScienceLab contact page, or add it to the enquiry cart with other items for one combined quotation.
Last updated: 24 September 2026