The Scale Pan, Brass is a 75mm hanging pan that carries loose masses, coins, grain or small objects beneath a spring balance, lever arm or stand. It hangs on suspension cords from a hook, so a hook-based set-up can take loads that cannot be hooked on directly.
| Parameter | Detail |
|---|---|
| Type | Hanging scale pan |
| Material | Brass |
| Pan diameter | 75mm |
| Suspension | Suspension cords with hook |
| Product code | SLE/LB/27 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Weighing loose objects. Hang a force meter from a retort stand, hook the pan on and zero the meter with the empty pan in place if it has an adjuster. Pour in a handful of nails or rice, read the force in newtons and convert it to a mass to compare with a balance reading.
A metre stick balance. Balance a metre stick at its centre on a fulcrum, then hang two scale pans at equal distances either side. Put an object in one pan and masses from a 100g brass mass set in the other until the stick levels again, and the class has built and used an equal-arm balance.
Bending of a loaded beam. Clamp one end of a metre stick firmly to the bench edge so most of it sticks out, and hang the pan near the free end. Add small masses a few at a time and measure how far the tip drops against a metal ruler held upright; the drop grows in step with the load.
Either works. Zeroing the spring balance with the empty pan in place removes the pan from every reading. If the meter cannot be zeroed, weigh the pan, cords and hook first and subtract that constant value from each reading.
No. The pan adds the same amount to every reading, which makes it a systematic error. Averaging many readings only reduces random scatter, so the pan's mass must still be zeroed out or subtracted.
The pan hangs from its hook at the top of the cords, which suits the ring or hook of a typical school spring balance, a hole in a lever arm or a rod held in a stand clamp. Check that the hook opening clears the point it hangs from.
The limit is usually set by whatever the pan hangs from. Keep the pan and its load within the range of the spring balance or the strength of the lever, and fill the 75mm pan only with what sits in it without spilling.
Let the cords hang to equal length so the pan stays flat, and put the load at the centre. After each addition, steady the pan with a finger and let it come to rest clear of the stand before reading.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 15 November 2026