The Mass Set, Brass, 1000g loads springs and pulley systems in equal 100 g steps up to one kilogram. This small form slotted set is made of brass and holds a 100 g hanger plus nine 100 g slotted masses. The hanger counts as the first step and is part of the 1000 g total.
| Parameter | Detail |
|---|---|
| Type | Small form slotted mass and hanger set |
| Material | Brass |
| Total mass | 1000g, hanger included |
| Hanger | 1 x 100g (included) |
| Slotted masses | 9 x 100g |
| Load steps | 100g steps, from 100g (hanger alone) to 1000g |
| Product code | SLE/LB/30 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Force and extension of a stiff spring. Clamp the spring on the Hooke's law apparatus, note the pointer position, then hang the hanger and add the brass masses one at a time. Record each extension and plot weight against extension. The straight part of the graph gives the spring constant.
Springs in series and in parallel. Take two springs of equal stiffness from a set of springs and hang them side by side under a bar, then end to end. Load each arrangement in 100 g steps and compare the extensions with those of a single spring.
Effort against load in a pulley system. Build a block and tackle from two double metal pulleys, hang the loaded hanger from the lower block and pull the effort string through a force meter. Raise the load one mass at a time and work out the mechanical advantage at each step.
Slide each mass down the stem until it lies flat, then turn it so its slot points away from the slot of the mass below. Staggered slots hold the stack together when the hanger swings or is knocked.
A spring responds to force, so the graph needs weight rather than mass. Convert grams to kilograms and multiply by the gravitational field strength. Each 100 g step adds roughly 1 N, which keeps the arithmetic easy for students.
Keep the ruler vertical beside the spring and read the pointer with the eye level with it. Wait until the hanger has stopped moving before each reading, because a bobbing load gives a different value every time.
The spring has passed its limit of proportionality, so extension no longer rises evenly with load. Beyond the elastic limit it will not return to its first length either. Stop loading once the points begin to bend away from the line.
Not usually. Its smallest step is 100 g, which can overstretch a soft spring in a single addition. For light springs and levers, the Mass Set, Brass, 100g gives 10 g steps and the Mass Set, Brass, 250g allows 5 g adjustments.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026