The Mass, Cast Alloy, 100g gives each bench group light loads in 10 g steps, from the hanger alone up to 100 g. This small format set holds nine 10 g slotted masses and a 10 g hanger, all in cast alloy, so a whole class can be issued identical sets.
| Parameter | Detail |
|---|---|
| Type | Small format cast alloy mass and hanger set |
| Material | Cast alloy |
| Total mass | 100g |
| Contents | 9 x 10g slotted masses, 1 x 10g hanger |
| Load steps | 10g, from 10g (hanger alone) to 100g |
| Product code | SLE/LB/33 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Weight against mass. Hang the hanger from a tubular plastic spring balance that reads in newtons and add the masses one at a time. Plot weight in newtons against mass in kilograms. The gradient of the line gives the gravitational field strength.
Oscillations of a loaded spring. Hang a steel extension spring from a stand, load it with the hanger and a few masses, and time several full oscillations. Repeat with more mass and plot the square of the period against the load.
Making a simple force meter. Fix a light spring to a retort stand with a card scale behind it. Mark the pointer position with the hanger alone, then again after each added 10 g mass, and the marked card becomes a homemade spring balance.
Mass is the amount of matter, and the full set has a mass of 100 g wherever it is taken. Weight is the pull of gravity on that mass, measured in newtons, so on the Moon the same set would weigh about one sixth as much.
The slope is weight divided by mass, which is the gravitational field strength in newtons per kilogram. A line passing through or very near the origin shows that weight is proportional to mass.
A spring balance that reads above or below zero when empty adds the same error to every weight reading and shifts the whole line on the graph. Set the zero with nothing on the hook, hold the balance vertical and read it at eye level once the hanger stops swinging.
No tolerance is stated for this set, only the 10 g value of each piece. To check a set, weigh the hanger and each mass on a balance that reads finer than 1 g and set aside any piece that differs clearly from the rest.
Pieces from different sets look alike and drift between benches during a lesson. A group number on each set keeps the hanger and its nine masses together, so every group starts the next practical with a full 100 g.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026