Cross equal fthd GI 4" ND 14 Bar Manufacturer,Supplier and Exporter in India

Cross equal fthd GI 4" ND 14 Bar (Product Code: SLE/WDF/05) is a four-way galvanised iron pipe fitting used to join four 4-inch water pipes at a single junction in pressurised water-supply lines. Every outlet has the same 4" nominal diameter and an internal (female) thread, and the body is rated for 14 bar, which suits contractors and water-project teams building distribution headers. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier in India that also sources water, sanitation and hygiene items.

Specifications

What Is the 4-Inch GI Equal Cross Used For?

A cross is chosen where one pipe run must meet three others at the same point — for example, a header that takes water from a pump or storage tank and sends it in three directions, or a junction where two supply lines intersect. Because the Cross equal fthd GI 4" ND 14 Bar has female threads on all four sides, each branch is made up with a male-threaded 4" GI pipe end or a threaded nipple. This keeps the junction compact and allows it to be dismantled later if the layout changes.

For a leak-free joint, clean the threads, wrap the male ends with thread-sealing tape or apply a suitable jointing compound, and tighten with pipe wrenches while holding the cross steady. A 4-inch assembly full of water is heavy, so support the pipes on each side of the junction. Pressure-test the completed line within the 14 bar rating before service, and close any outlet that is not needed yet with a threaded plug.

What to Specify When Ordering

• The number of 4" equal crosses needed for each site or project phase.
• Confirmation that your pipes are 4" nominal diameter GI with male threads to suit the female outlets.
• The working and test pressure of your system, so that it stays within the 14 bar rating.
• Companion fittings required in the same order, such as nipples, plugs, bends or elbows.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a company based in Ambala, Haryana. For this galvanised cross the company acts as supplier: it sources the fitting, prepares the quotation and arranges dispatch together with other water, sanitation and hygiene items that institutions and project buyers order in one lot. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). Read more about the company on the ScienceLab company profile.

Related Water, Sanitation & Hygiene Supplies

These threaded GI items are commonly ordered with a 4" cross to complete a junction:

• Nipple Taper mthd Hex GI 14 Bar — a male-threaded hex nipple for joining the cross to other female fittings; ask for the matching size.
• Plug Hollow mthd GI 14 Bar — seals an outlet that will be connected later.
• Bend 90º equal fxf GI 4" ND 14 Bar — turns a branch from the cross through a right angle in the same pipe size.
• Elbow 90º equal fthd GI ND 14 Bar — a compact choice where the change of direction must be tight.

See the full range in the Water, Sanitation & Hygiene Supplies category.

Frequently Asked Questions

What size are the outlets on the Cross equal fthd GI 4" ND 14 Bar?
All four outlets of the Cross equal fthd GI 4" ND 14 Bar are 4-inch nominal diameter with internal female threads, so the fitting accepts male-threaded 4" GI pipe or nipples on every side. It is an equal cross, so no outlet is reduced.

What pressure is the 4-inch GI equal cross rated for?
The Cross equal fthd GI 4" ND 14 Bar is rated for 14 bar, which is 200 lb per square inch. Keep the working pressure and the site test pressure of your water line within this figure when planning pumps, tanks and valves around the junction.

What is the cross made of?
The Cross equal fthd GI 4" ND 14 Bar is made of malleable cast iron that is hot-dip galvanised for corrosion protection. Its threads are cut after galvanising, so the zinc coating does not fill the thread form and the fitting screws onto pipe cleanly.

Who supplies the Cross equal fthd GI 4" ND 14 Bar?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab in Ambala, Haryana, supplies the Cross equal fthd GI 4" ND 14 Bar. The company sources the fitting and quotes it alongside other water, sanitation and hygiene items for buyers in India and international markets.

What should a quotation request for this cross include?
A quotation request for the Cross equal fthd GI 4" ND 14 Bar should state the quantity, the delivery location and any companion fittings you need. If you require supporting documents for the fitting, raise it through the contact page so we can confirm what is available.

Can the 4" GI cross be ordered in bulk or for export?
Yes, bulk and export enquiries for the Cross equal fthd GI 4" ND 14 Bar are welcome. ScienceLab supplies institutions, contractors and project buyers in India and international markets; send quantities and the destination so the quotation can cover packing and freight.

Request a Quote

To price the Cross equal fthd GI 4" ND 14 Bar for your project, send the quantity and delivery location through the ScienceLab contact page, or add it to the enquiry cart with the other fittings on your list. Buyers preparing laboratory equipment tenders in India can include water-supply items like this cross in the same enquiry.

Last updated: 24 September 2026