- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Coupler PVC, skt, rrj/flange, 200mm x 8"
Coupler PVC, skt, rrj/flange, 200mm x 8" (Product Code: SLE/WDF/30) is a uPVC flanged coupling used to connect a 200 mm outside-diameter PVC pipe to 8" nominal-diameter flanged G.I. fittings, valves or equipment on large water mains. One end is a rubber ring socket that the PVC pipe pushes into; the other is a flange that bolts to the metal side. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Flanged coupling |
| PVC end | Rubber ring socket (rrj), for PVC pipe of 200 mm outside diameter |
| G.I. end | Flange, for G.I. fitting of 8" nominal diameter |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/30 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 200mm PVC Flanged Coupler Used For?
Large-bore mains usually meet valves, pump stations, meters and older metal pipework at a bolted flange. This coupling bridges the two systems: the 200 mm PVC pipe enters a rubber ring socket, so no solvent cement is used on that side, while the flange bolts to an 8" G.I. flange. Rubber ring joints also allow a little movement, which helps long mains cope with expansion and ground settlement.
Chamfer and clean the pipe spigot, apply a lubricant suitable for the rubber ring, and push the pipe home squarely without twisting the ring out of its groove. On the flange side, use a gasket between the faces and tighten the bolts evenly in a cross pattern. Confirm with us which gasket and bolt set you need, and keep service within 10 bar at 20°C.
What to Specify When Ordering
- PVC side: 200 mm outside-diameter pipe suitable for rubber ring jointing.
- Flange side: 8" nominal diameter; share your flange drilling standard so we can confirm it matches.
- Gasket, bolts and ring lubricant: say whether you need them sourced with the coupling.
- Quantity: one per flanged connection on the main.
Supplier
Jain Scientific Equipments Private Limited supplies this 200 mm flanged coupling under the ScienceLab name from Ambala, Haryana. The company sources large and small pipe fittings for water utilities, WASH programmes, institutions and contractors, and can combine them with its laboratory and hygiene ranges on one enquiry. The ScienceLab profile has more about the company.
Related Water, Sanitation & Hygiene Supplies
Items used on the same large main or at similar flanged connections:
- Elbow 90º Equal PVC, fxf, rrj, 200mm OD-P — a rubber-ring bend for the same 200 mm pipe.
- Coupler PVC Socket Solvent Cement Joint Flange, 110mm x 4" — a smaller flanged coupling for 110 mm solvent-weld pipe.
- Coupler PP Comp, HDPE 110mmxflng 4"O/ND-P — the flanged option for HDPE pipe.
- Pump Centrifugal, Diesel 50cbm/hr — pumping equipment for supply schemes; check its outlet connection before planning the fittings.
Explore the full Water, Sanitation & Hygiene Supplies range.
Frequently Asked Questions
What does the Coupler PVC, skt, rrj/flange, 200mm x 8" connect?
The Coupler PVC, skt, rrj/flange, 200mm x 8" connects a 200 mm outside-diameter PVC pipe, pushed into its rubber ring socket, to an 8" nominal-diameter flanged G.I. fitting, valve or piece of equipment bolted to its flange.
Does the 200mm rubber ring flanged coupler need solvent cement?
No. The PVC side of the 200mm rubber ring flanged coupler seals with a rubber ring, so the chamfered pipe is lubricated and pushed in rather than cemented. Solvent cement should not be used on rubber ring joints.
What pressure is the 200mm x 8" PVC flanged coupler rated for?
The 200mm x 8" PVC flanged coupler is rated 10 bar at 20°C and suits water between 0 and 50°C. PVC carries less pressure as temperature increases, so the main's design pressure should reflect the actual water temperature.
Is the Coupler PVC, skt, rrj/flange, 200mm x 8" suitable for drinking water?
Confirm with us before using the Coupler PVC, skt, rrj/flange, 200mm x 8" on a drinking-water main. Utilities and project engineers should describe the application through the contact page and ask what ScienceLab can confirm for the supplied batch.
Are gaskets and bolts included with the 200mm x 8" flanged coupler?
The product description for the 200mm x 8" flanged coupler does not list a gasket or bolt set, so please tell us through the contact page whether you need these sourced with the coupling and your flange drilling standard.
Who supplies the 200mm x 8" PVC flanged coupler?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 200mm x 8" PVC flanged coupler to water projects, contractors, institutions and dealers in India and international markets, together with matching 200 mm fittings.
Request a Quote
Send the quantity of product code SLE/WDF/30, your flange standard and delivery location through the contact page, or add it to the enquiry cart with the rest of your mains fittings.
Last updated: 24 September 2026
