Solar energy kits on this page show how sunlight becomes electricity and heat, from a solar learning toy and single mounted cells to photovoltaic training systems and solar collectors. Primary and secondary schools use the smaller sets in physics and environmental science, while colleges, polytechnics and vocational courses use the cased systems for I-V curves, regulators and inverters. The range is supplied by ScienceLab, Ambala.
| Group | What it covers | Example products |
|---|---|---|
| First steps with sunlight | A play-based solar toy for young children, and qualitative trials on what a solar cell can power and how it should face the light, run on the hand-crank primary base kit. | Solar Sunstick, Solar Photovoltaic Basic, Solar Minikit Basic |
| Solar cells in physics practicals | Series and parallel cell connections, shading and light colour, and diode, capacitor and resistor modules, with most Large-set experiments workable in ordinary room light. | Solar Photovoltaic Large, Solar Energy Kit |
| Light to motion | A selenium cell on a base driving a mounted motor that lifts a light load, and a solar cart that runs in clear sunlight. | Mounted Solar Cell, Mounted Motor for Solar Cell, Solar Buggy |
| PV systems for senior and vocational courses | I-V characteristics, temperature dependence, MPP tracking and fill factor, charge regulators and a DC/AC inverter on a laboratory scale. | Solar Photovoltaic Ready-To-Go, Solar Photovoltaic Professional |
| Solar thermal energy | Collectors run with or without a pump, concentrated solar power, a Peltier element, and a parabolic mirror focusing sunlight onto a copper receiver. | Solar Thermal Energy Ready-To-Go, Solar Furnace |
| Watching the Sun | A sun-viewing filter that lets a supervised class follow the Sun's disc and the progress of a partial or annular eclipse. | Solar Filter |
Match the kit to the class. The Solar Sunstick is a learning toy for children from 6 years. The Solar Photovoltaic Basic runs only with a base kit, the Solar Minikit Basic in primary school or the Solar Kit Basic in junior high. Solar Photovoltaic Large suits school physics, while the Ready-To-Go and Professional systems carry the work on to I-V curves and complete PV systems for senior and vocational courses.
Plan the light before the lesson. Most Solar Photovoltaic Large experiments work in ordinary room lighting, and its lighting module, needed for only a few, runs from a student power supply. The Solar Buggy and the Solar Furnace need clear sunlight, so book an outdoor slot and keep a classroom task ready for a cloudy day. Give cells time to settle under steady light before readings are taken.
Keep the handling rules plain. Hold the Solar Filter up to a lamp before every use and set aside any sheet with scratches, pinholes, creases or tears. Around the Solar Furnace, nobody looks into the mirror or the reflected beam, hands and paper stay away from the focus, and the copper receiver is lifted with tongs or heat-resistant gloves. Let lamp housings cool before the parts go back into their case.
The Solar Photovoltaic Professional and the Solar Thermal Energy Ready-To-Go each include a lamp housing with an illuminant. The Basic and Large photovoltaic sets have a lighting module, which in the Large set runs from a student power supply. The Solar Buggy and the Solar Furnace depend on clear sunlight, so lessons with them are planned outdoors.
Check each kit's list of items not included. Solar Photovoltaic Large needs an AV module, a power module, short test leads and a laboratory thermometer. Solar Photovoltaic Basic needs one of the two base kits. For the Solar Energy Kit, decide whether groups will record output with a multimeter or with an ammeter and voltmeter, and add them to the list.
Usually the light is too weak at the cell. Room lighting gives far less light than direct sun, and cloud or indirect light cuts the output further. Face the cell squarely towards the light, check that nothing shades part of it, push every plug fully home, and move the lesson into sunlight or use the kit's own lighting module.
A small motor needs more current to start turning than to keep turning, so in weak light a cell may keep a spinning motor going but fail to start it. A light flick of the colour disc or pulley gets it moving. The Mounted Motor for Solar Cell is a low-consumption motor built to run straight from a solar cell.
In series the voltages add while the current stays that of one cell. In parallel the currents add while the voltage stays that of one cell. The Solar Energy Kit links its eight silicon cells either way to run a small motor and fan, and Solar Photovoltaic Large compares three identical modules.
How much of its open-circuit voltage and short-circuit current a cell can deliver at the same time. It is the maximum power divided by the product of the open-circuit voltage and the short-circuit current, so a squarer I-V curve gives a higher fill factor. Students first find the maximum power point on the curve. Solar Photovoltaic Professional lists I-V characteristics, MPP and fill factor among its experiments.
Solar teaching benches, from the Sunstick toy to the PV trainer, come from ScienceLab, the name under which Jain Scientific Equipments Pvt Ltd supplies schools, colleges, training centres and dealers in 110 countries from Ambala. A Solar Kit Basic gives the Basic add-on sets their base unit, power module and AV module, and a Standard Digital Multimeter suits the Solar Energy Kit's cell-by-cell readings. See the ScienceLab company profile.
To request a quotation or a catalogue for this range, send the product names, codes and quantities through our contact page or add the items to your enquiry cart.
Last updated: 16 November 2026