- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Vertical Stand With 3 Clamps
Vertical Stand With 3 Clamps (Product Code: SCL230/015) is an iron retort stand with a vertical rod, three clamps and boss heads, used to hold glassware and apparatus at fixed heights during experiments. Its 7 x 5 inch base is powder coated and the mild steel rod is chrome plated, so a burette, test tube, flask, thermometer or pendulum can be clamped at the same time. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Iron retort stand |
| Size | 7 x 5 in base |
| Base material | Iron, powder coated (listed as cast iron and as sheet metal — confirm the base type when ordering) |
| Rod | Mild steel, chrome plated |
| Clamps | 3 clamps, each with a boss head |
| Holds | Burettes, test tubes, flasks and similar apparatus |
| Product code | SCL230/015 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Vertical Stand Used For?
With three clamps on one rod, a single stand can hold several parts of a set-up at once — for example a thermometer above a boiling tube, a burette over a flask, or a split cork gripping a pendulum thread with a second clamp steadying a scale. In physics it also supports springs for Hooke's law and spring balances for weighing.
Keep the heaviest load over the base, tighten each boss head firmly on the rod, and close clamps on glassware only enough to hold it without strain. Wipe the rod after spills so the chrome plating stays clean. A stand like this is standard lab stand, clamp and boss head equipment for school physics and chemistry benches alike.
What to Specify When Ordering
- Base type — confirm cast iron or sheet metal, both powder coated, as described in the listing.
- Number of stands per bench or lab.
- Whether extra clamps or boss heads should be quoted for more complex set-ups.
OEM Manufacturer
Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, is the OEM (original equipment manufacturer) of the Vertical Stand With 3 Clamps. The base, rod, clamps and boss heads are made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, and the stands are supplied factory-direct to schools, colleges, dealers and importers.
Spare clamps or boss heads for existing stands can be discussed with the manufacturer when you place a repeat order — just ask us. Visit the ScienceLab profile to learn more about the company.
Related Physics Lab Equipment
Items commonly clamped to, or used with, this stand:
- Bob/Metallic Sphere (Small) With Hooks — pendulum bob hung from one of the clamps.
- Split Cork — grips the pendulum thread inside the clamp.
- Stop Clock — times the oscillations of the pendulum.
- Spring Balance, Tubular — hangs from a clamp for weighing.
- Iron Stand — another stand listing in this range.
More support and mechanics apparatus is in the Physics Lab category.
Frequently Asked Questions
What comes with the Vertical Stand With 3 Clamps?
The Vertical Stand With 3 Clamps comes as an iron retort stand with a 7 x 5 inch base, a chrome-plated mild steel rod and three clamps, each fitted with a boss head so it can be set at any height on the rod.
What is the Vertical Stand With 3 Clamps made of?
The Vertical Stand With 3 Clamps has a powder-coated iron base and a chrome-plated mild steel rod. The listing describes both cast iron and sheet metal for the base, so confirm the base type when you request a quotation.
What can be held on the Vertical Stand With 3 Clamps?
The Vertical Stand With 3 Clamps holds burettes, test tubes, flasks, thermometers, pendulum threads and spring balances. Having three clamps lets you support two or three parts of an experiment on the same rod.
How do I keep the Vertical Stand With 3 Clamps stable?
Keep the load of the Vertical Stand With 3 Clamps centred over the base, place the heaviest item lowest on the rod, and tighten each boss head before attaching glassware. Do not let long apparatus overhang the bench edge.
Who manufactures the Vertical Stand With 3 Clamps?
The Vertical Stand With 3 Clamps is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory at Saha, Ambala, Haryana, India. Quotations for India and international markets come directly from the manufacturer.
Request a Quote
Send your requirement for the Vertical Stand With 3 Clamps through the contact page, or add it to the enquiry cart. The manufacturer will reply with a quotation.
Last updated: 24 September 2026
