- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Pipette Controller Replacement Nosepiece Adapter
Pipette Controller Replacement Nosepiece Adapter (Product Code: SLE/ME/18) is a spare nosepiece used to restore a secure pipette grip on the Pipette Controller in laboratories that pipette every day. It is designed to accommodate pipettes from 1 to 100 mL, so a single adapter serves both small and large pipettes, and fitting a new one is a quick fix when the old nosepiece is worn. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Replacement nosepiece adapter |
| For use with | Pipette Controller |
| Pipette sizes accommodated | 1 to 100 mL |
| Product code | SLE/ME/18 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is a Replacement Nosepiece Adapter Used For?
The nosepiece is the part of a pipette controller that grips the pipette and seals the air path. With daily use it can stretch, split or become contaminated, and the signs are easy to spot: pipettes wobble or slip out, liquid creeps down after aspiration, or the controller struggles to hold a column steady. Swapping in this adapter brings back a firm, airtight fit without replacing the whole controller.
Keep a spare with every shared controller so a worn part can be changed in minutes rather than halting a practical. When fitting, push the adapter fully home and check that a pipette sits straight before use. Insert pipettes with a gentle twist instead of forcing them at an angle, which prolongs the life of the new nosepiece and avoids cracking glass pipettes.
Supplier
This spare part is supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades as ScienceLab, to schools, colleges, research labs and dealers in India and international markets. It can be ordered on its own or together with the controller and pipettes. For supplier onboarding, the company is registered under GSTIN 06AAECJ8618A1ZT and carries Legal Entity Identifier 3358004HRD1JIVXKYX49. More about ScienceLab is on the company profile.
Related Measuring Equipment
Items that go with this spare nosepiece:
- Pipette Controller — the rechargeable controller this adapter is made for.
- Disposable Glass Serological Pipets — pipettes held by the nosepiece during transfers.
- Pipette Stand — upright storage for clean pipettes near the controller.
- Safety Pipet Filler, Silicone — a manual filler to keep work going while a part is changed.
Find other pipetting accessories in the Measuring category.
Frequently Asked Questions
Which controller does the Pipette Controller Replacement Nosepiece Adapter fit?
The Pipette Controller Replacement Nosepiece Adapter is intended for use with the Pipette Controller listed in the same Measuring range. If you own a different controller, send its make and model through the contact page before ordering so the fit can be checked.
What pipette sizes does the Pipette Controller Replacement Nosepiece Adapter accept?
The Pipette Controller Replacement Nosepiece Adapter is designed to accommodate pipettes from 1 to 100 mL. One adapter therefore covers the full span of pipettes normally used with the controller, from small graduated pipettes to large serological ones.
When should I fit a new Pipette Controller Replacement Nosepiece Adapter?
Fit a new Pipette Controller Replacement Nosepiece Adapter when pipettes start slipping, liquid drifts down after aspiration, or the old nosepiece is cracked, stretched or contaminated. A good seal is essential for the controller to hold liquid steadily.
How many Pipette Controller Replacement Nosepiece Adapters should a lab keep?
Labs that share one controller among several users usually keep at least one spare Pipette Controller Replacement Nosepiece Adapter on hand, so a worn part can be swapped immediately. Ordering spares together with the controller saves a second delivery.
Who supplies the Pipette Controller Replacement Nosepiece Adapter?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Pipette Controller Replacement Nosepiece Adapter as a spare part to schools, colleges, research labs and dealers in India and international markets.
What should a quote request for the Pipette Controller Replacement Nosepiece Adapter include?
Include the number of Pipette Controller Replacement Nosepiece Adapters needed, the controller they will be used with and your delivery address. List any new pipettes or a second controller in the same enquiry for one combined quotation.
Request a Quote
Tell us how many spare nosepieces you need through the contact page, or add this adapter to the enquiry cart together with the controller or pipettes.
Last updated: 24 September 2026
