Paraffin Heater (Product Code: SCL302 /050) is a 7-litre thermostatically controlled bath used to melt and hold paraffin wax at a set temperature, mainly for paraffin wax applications in physiotherapy departments. It heats from ambient to 80 °C with ±1 °C control from a hydraulic-type thermostat, and has an aluminium inner tank inside a powder-coated MS sheet body. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Capacity | 7 litres |
| Inner structure | Aluminium |
| Outer body | MS sheet, powder coated |
| Temperature range | Ambient to 80 °C, ±1 °C |
| Temperature control | Hydraulic-type thermostat (listed as imported) |
| Warranty (as listed) | 24 months; terms confirmed on the quotation |
| Product code | SCL302 /050 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
In paraffin wax therapy, a form of superficial heat used in physiotherapy, the wax is melted in the heater and the patient’s hand or foot is dipped several times to build up a coating, which is then wrapped to hold the warmth. The 7-litre bath holds the working quantity of wax for these applications. Laboratories can also use the heater wherever a controlled bath of molten paraffin is needed.
Let the wax melt fully, set the thermostat to the temperature your protocol calls for and check the wax with a thermometer before each application. Place the heater on a stable, dry surface, keep the wax level below the rim and remove debris from the bath from time to time. The powder-coated MS body is simple to wipe clean.
The Paraffin Heater is supplied by Jain Scientific Equipments Private Limited, Ambala, Haryana, which trades as ScienceLab and serves physiotherapy clinics, hospitals and teaching institutions. Find out more on our company profile.
Physiotherapy rooms that use paraffin wax often add:
Find more in Medical Diagnostic & Therapy Equipment.
What is the capacity of the Paraffin Heater?
The Paraffin Heater has a capacity of 7 litres of wax. The bath is built with an aluminium inner structure and an outer body of powder-coated MS sheet.
What temperature range does the Paraffin Heater reach?
The Paraffin Heater heats from ambient temperature up to 80 °C, held to ±1 °C by a hydraulic-type thermostat. Set it to the temperature your treatment or lab procedure requires and check the wax before use.
Is paraffin wax included with the Paraffin Heater?
Paraffin wax is not listed as included with the Paraffin Heater. If you need wax with the heater, mention the intended use in your enquiry through our contact page so it can be discussed and quoted.
Does the Paraffin Heater carry a warranty?
The Paraffin Heater listing states a warranty for 24 months. The warranty terms that apply to your purchase, and what they cover, are set out on the quotation you receive from us.
Who supplies the Paraffin Heater?
The Paraffin Heater is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to physiotherapy clinics, hospitals and laboratories in India and international markets.
To receive a Paraffin Heater quotation, send the quantity, your mains voltage and delivery details through the contact page, or add it to the enquiry cart.
Last updated: 24 September 2026