- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Newton Mass Set 1N Set
Newton Mass Set 1N Set (Product Code: SLE/PHY/260) is a set of small slotted brass masses graded in tenths of a newton, used to apply light, finely stepped forces in physics practicals. With nine 0.1N slotted masses on a 0.1N hanger it builds loads in 0.1N increments up to 1N, which suits soft springs and low-range force meters used by students. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | Brass |
| Contents | 9 x 0.1N slotted brass masses with 1 x 0.1N hanger |
| Increment | 0.1N per slotted mass |
| Maximum load (all pieces on the hanger) | 1N |
| Product code | SLE/PHY/260 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Newton Mass Set 1N Used For?
Where a full newton would overstretch a soft spring or swamp a sensitive measurement, 0.1N steps give students many data points across a small range. The set is used for the extension of soft springs and rubber bands, for checking low-range force meters, for balancing small moments on a metre rule and for loading light pulleys and friction blocks. It complements a Hooke’s law spring kit, where a smooth, well-populated graph matters more than a large total load.
The pieces are small, so keep them in a tray or box during the practical and count them back in at the end of each lesson. Place masses on the hanger gently rather than dropping them, and keep the brass dry so it stays easy to handle and read.
What to Specify When Ordering
- Whether you need this 1N set for light loads, the Newton Mass Set 10N Set for heavier ones, or both
- The number of sets for your student groups
- Springs, force meters or pulleys to be supplied with the sets, if needed
OEM Manufacturer
The Newton Mass Set 1N Set is a ScienceLab-made product. Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its original equipment manufacturer (OEM) and produces it at the company’s licensed factory in Saha, Ambala, Haryana, India. Because quotations come straight from the manufacturer, schools, colleges, dealers and importers deal with the source of the product rather than an intermediary.
Ask us about replacement masses if pieces are lost over time. Company details are on the ScienceLab profile.
Related Physics Lab Equipment
Pieces of apparatus that work well with light, finely stepped loads:
- Newton Mass Set 10N Set — the heavier companion set for larger forces
- Spring Scales, Green, 500 g (5 N) — a spring scale to check against known small loads
- Balance Spring Tubular Plastic — a spring balance for student force measurements
- Balance Demonstration Fulcrum/Lever — for moments experiments with small loads
- Pulley, Metal, Single, Parallel — for string-and-load set-ups
Browse all Physics Lab Equipment.
Frequently Asked Questions
What does the Newton Mass Set 1N Set contain?
The Newton Mass Set 1N Set contains nine slotted brass masses of 0.1N each and one 0.1N hanger. Loading every piece gives a total of 1N, so students can build forces in ten equal steps.
What is the smallest step with the Newton Mass Set 1N Set?
The smallest step with the Newton Mass Set 1N Set is 0.1N, the value of each slotted mass and of the hanger. This fine increment gives more readings over a small range, which is useful for soft springs and sensitive force meters.
When should I choose the Newton Mass Set 1N Set over the 10N set?
Choose the Newton Mass Set 1N Set when your springs, balances or lever experiments need light loads in fine steps. For stiffer springs and larger forces, the Newton Mass Set 10N Set is the better match, and many labs keep both.
How should the Newton Mass Set 1N Set be stored?
Store the Newton Mass Set 1N Set in a dry box or tray with the masses stacked on or beside the hanger. The pieces are small, so count them after each practical to make sure the set stays complete for the next class.
Who manufactures the Newton Mass Set 1N Set?
The Newton Mass Set 1N Set is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory in Saha, Ambala, India. Buyers get quotations and answers on replacement pieces directly from the maker.
Can the Newton Mass Set 1N Set be ordered in bulk for several labs?
Bulk orders for the Newton Mass Set 1N Set are handled by the manufacturer for schools, institutions and dealers in India and international markets. State the number of sets and the delivery location in your enquiry for a combined quotation.
Request a Quote
Ask for a price on the Newton Mass Set 1N Set through the contact page, or add it to the enquiry cart together with any related apparatus — the quotation comes direct from the manufacturer.
Last updated: 24 September 2026
