- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Inflating-Kit for Balls
Inflating-Kit for Balls (Product Code: SLE/PE/08) is a hand pump kit used to inflate new balls and re-inflate the footballs, basketballs and volleyballs kept in a school physical education store. The kit pairs 1 hand pump – tube approx. 22 mm in diameter and 210–250 mm long, in an enamelled metal or plastic casing with a wooden or plastic handle – with 2 non-return inflating needles. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Kit contents | 1 x hand pump; 2 non-return inflating needles |
| Pump tube diameter | Approx. 22 mm (±5% variation) |
| Pump tube length | Minimum 210 mm, maximum 250 mm |
| Casing | Enamelled metal or plastic |
| Handle | Wooden or plastic |
| Suitable for | Footballs, basketballs and volleyballs |
| Use | Inflation of new balls and re-inflation of most balls used for physical education and recreation |
| Estimated weight | 83 g |
| Estimated volume | 0.354 dm³ |
| Product code | SLE/PE/08 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Ball Inflating Kit Used For?
Many sports balls are shipped flat to save space, and all of them slowly lose pressure with use. This kit lets a PE teacher bring a new ball up to playing pressure on the day it arrives and keep the whole ball store topped up, so lessons are not spoiled by soft footballs or basketballs that will not bounce.
Fit a needle to the pump, wet its tip with a drop of water, and push it straight into the ball’s valve without twisting. Pump with steady, full strokes, check the pressure recommended on the ball, and stop before it becomes over-hard. Remove the needle straight out and keep the spare needle in a safe place, as needles are small and easily lost.
What to Specify When Ordering
- The number of kits – for example one per PE store or per sports ground.
- Any preference between an enamelled metal and a plastic pump casing.
- Any preference between a wooden and a plastic handle.
- Which balls you want quoted with the kit, so everything arrives together.
Supplier
The Inflating-Kit for Balls comes from Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala in Haryana and supplies it with the balls in its physical education range. Ordering the pump together with footballs, basketballs or handballs means a school receives everything needed to get new balls into play. Visit our company profile for background on the company.
Related Physical Education Equipment
Balls and equipment that this pump keeps in playing condition:
- Basketball, Professional Size — delivered deflated, ready to be pumped up with this kit.
- Handball, Junior — junior-size handball supplied deflated for younger players.
- Handball, Senior — senior-size handball that also arrives deflated.
- Hard Surface Football, Size 3 — rubber football for playground games with young children.
- Volleyball Net — for setting up a court once your volleyballs are inflated.
See every item in our Physical Education category.
Frequently Asked Questions
What is included in the Inflating-Kit for Balls?
The Inflating-Kit for Balls includes 1 hand pump and 2 non-return inflating needles. Having two needles means a spare is on hand if one bends or goes missing, which happens easily with such small parts.
Which balls can the kit inflate?
The Inflating-Kit for Balls is suitable for footballs, basketballs and volleyballs, and is intended for inflating new balls and re-inflating most balls used for physical education and recreation, including those delivered deflated.
What size is the pump?
The hand pump in the Inflating-Kit for Balls has a tube of approximately 22 mm diameter (±5% variation) and a length between 210 mm and 250 mm. Its estimated weight is 83 g, so it is light enough to keep in a PE bag.
What is the pump made of?
The pump in the Inflating-Kit for Balls has an enamelled metal or plastic casing with a wooden or plastic handle. If your specification calls for one particular casing or handle material, state it in your enquiry and we will confirm what can be supplied.
How do I avoid damaging a ball’s valve?
When using the Inflating-Kit for Balls, moisten the needle tip, insert it straight into the valve without twisting, and withdraw it straight out. Forcing a dry needle in at an angle can damage the valve and cause slow leaks.
Who supplies the Inflating-Kit for Balls?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, supplies the Inflating-Kit for Balls to schools, sports programmes and dealers in India and international markets, on its own or with balls from the same range.
How can I request a quotation?
Send product code SLE/PE/08, the number of kits, any casing or handle preference and your delivery location through our contact page. We will reply with a quotation for the Inflating-Kit for Balls and any balls you list.
Request a Quote
Get a price for the Inflating-Kit for Balls through our contact page, or add it to the enquiry cart along with the balls you are ordering.
Last updated: 24 September 2026
