Hangers with Slotted Weights 500 gm Manufacturer,Supplier and Exporter in India

Hangers with Slotted Weights 500 gm (Product Code: SCL258/028) is a hanger-and-slotted-mass set used to load springs, wires and strings in equal steps during physics practicals. Students use it to add 100 gm at a time, because the 500 gm capacity is made up as 5 x 100 gm in black iron, with a hooked design for hanging from balances and apparatus. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Are Hangers with Slotted Weights Used For?

Step loading is at the heart of many school practicals, and this 500 gm set is one of the everyday physics lab instruments that makes it possible. In a Hooke's law practical the hanger hangs from a spring and 100 gm weights are added one by one while the extension is recorded; the same set loads the experimental wire in Searle's apparatus, pulls a string over a bench pulley, or supplies known forces for moments and equilibrium work.

The slot in each weight lets it slide onto the hanger without unhooking the set-up, so the reading position is not disturbed between loads. Turn successive slots in different directions so the stack stays secure, take readings both while loading and unloading, and wipe the iron weights dry before putting them away as a complete set.

What to Specify When Ordering

• Which set you need: this 500 gm black-iron set (5 x 100 gm) or the single 100 gm chrome-plated Hangers with Slotted Weights
• Number of sets for each practical batch
• Whether your experiment needs the hanger's own mass counted within the stated load (ask us to confirm)
• The apparatus you will hang it from, so the hook fit can be checked

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM for these Hangers with Slotted Weights 500 gm and makes them at its own licensed factory at Saha, Ambala, Haryana, India, rather than buying them in from a trader. Institutions and dealers get quotations straight from the maker, and extra sets or replacement weights for an existing lab can be requested from the same source; just ask us. The company is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714) and handles export orders under Importer-Exporter Code AAECJ8618A (DGFT). More on the company profile page.

Related Physics Lab Equipment

Practicals that use the 500 gm hanger set usually call for these items too:

• Hangers with Slotted Weights — a single 100 gm chrome-plated option for lighter loads
• Searle's Apparatus — the Young's modulus practical that is loaded in steps
• Vertical Stand With 3 Clamps — to suspend a spring and hanger for Hooke's law
• Bench Pulley — to turn a hanging load into a horizontal pull
• Spring Balance, Tubular — to cross-check loads in newtons

Explore the full Physics Lab category for more mechanics apparatus.

Frequently Asked Questions

How much load does the Hangers with Slotted Weights 500 gm set provide?
The Hangers with Slotted Weights 500 gm set has a capacity of 500 gm, made up as 5 x 100 gm, with a hanger. Students can therefore load an experiment in five equal 100 gm steps of roughly 0.98 N each.

Is the hanger's mass included in the 500 gm?
Whether the hanger's own mass counts within the 500 gm of the Hangers with Slotted Weights 500 gm set should be confirmed with us. If your practical needs exact loads, ask through the contact page before ordering.

What material and finish do the Hangers with Slotted Weights 500 gm have?
The Hangers with Slotted Weights 500 gm set is made of iron with a black finish and is described as resistant to corrosion and abrasion. Wipe the weights dry after use and store them stacked on the hanger to keep the set together.

How is the 500 gm set different from the single 100 gm hanger weight?
The Hangers with Slotted Weights 500 gm set (SCL258/028) gives 5 x 100 gm in black iron for step loading, while Hangers with Slotted Weights (SCL260/029) is a single 1 x 100 gm chrome-plated iron weight with hanger for small loads.

Who manufactures the Hangers with Slotted Weights 500 gm?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Hangers with Slotted Weights 500 gm as the OEM at its own factory in Saha, Ambala, Haryana, India, and supplies them factory-direct to institutions and dealers.

Can the Hangers with Slotted Weights 500 gm be ordered in bulk or exported?
Yes. The Hangers with Slotted Weights 500 gm are quoted in bulk for schools, colleges and dealers across India and international markets. Give code SCL258/028, the number of sets and the destination in your enquiry.

Request a Quote

Price the Hangers with Slotted Weights 500 gm by writing to us on the contact page or by adding the set to the enquiry cart. Quotations are sent directly by the manufacturer.

Last updated: 24 September 2026