- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Electrode Rod Holders
Electrode Rod Holders (Product Code: SLE/PHY/164) are plastic strips fitted with two crocodile clips and 4 mm socket terminals, used to grip electrode rods and wire them to a power supply in electrolysis and conductivity experiments. Listed as "Rods, Pack of 5", they hold a pair of carbon or metal rods steady in the solution so students can concentrate on what happens at each electrode. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Pack listing | Rods, pack of 5 |
| Body | Plastic strip |
| Connections | 4 mm socket terminals |
| Grips | Two crocodile clips |
| Purpose | Holds electrode rods and foils in place during use |
| Product code | SLE/PHY/164 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Electrode Rod Holders Used For?
Electrolysis with carbon rods is one of the most common school practicals, and it gives clear results only when the rods stay still. Clip two rods into the holder, lower them into the electrolyte and connect the 4 mm sockets to a low-voltage DC supply; students can then watch metal deposit on the cathode and gas form at the anode, and test the products. The same set-up checks whether a solution conducts, using a lamp or meter in series.
Carbon rods are brittle, so clip them gently near the top and keep the crocodile clips clear of the liquid. Use red and black leads to keep track of polarity, switch off before removing the rods, and ventilate the room when electrolysing chloride solutions. The holders are a practical item among chemistry and physics lab equipment for schools in India and abroad.
What to Specify When Ordering
- Number of packs — listed as rods, pack of 5; ask us to confirm exactly what each pack contains.
- Electrode rods to use with the holders, such as carbon rods, if you need them separately.
- A low-voltage DC supply and 4 mm leads for each group.
- Whether the Electrode Foil Holders version should be added for foil electrodes.
OEM Manufacturer
Electrode Rod Holders are produced by Jain Scientific Equipments Private Limited, which trades as ScienceLab and is the OEM (original equipment manufacturer) of this accessory. They are made at the company's own licensed factory at Saha, Ambala, Haryana, India, and sold straight from the factory to schools, colleges, lab-supply dealers and importers. If your department wants more holders later, reordering from the manufacturer is straightforward — ask us for repeat supply. See our company profile for background.
Related Physics Lab Equipment
These items complete an electrolysis or conductivity set-up:
- Electrode Foil Holders — the matching holder listed for flat foil electrodes.
- Electrode, Carbon Rod — carbon rods for electrolysis.
- Power Supply, Stepped — low-voltage AC/DC supply providing DC for electrolysis.
- Stackable Leads — 4 mm leads for the socket terminals.
Browse related apparatus in the Physics Lab Equipment category.
Frequently Asked Questions
What are Electrode Rod Holders?
Electrode Rod Holders are plastic strips with 4 mm socket terminals and two crocodile clips. They hold electrode rods, and also foils, in place during use, and let the electrodes be connected to a supply or meter with standard leads.
Are electrode rods included with Electrode Rod Holders?
Electrode Rod Holders are listed as "Rods, Pack of 5". To be sure whether rods are included or should be ordered separately, ask us through the contact page; carbon rods are also available as a separate item.
Can Electrode Rod Holders be used for electrolysis with carbon rods?
Yes. Electrode Rod Holders grip carbon rods with their crocodile clips while the 4 mm sockets connect to a low-voltage DC supply. Keep the clips above the electrolyte so that only the rods take part in the reaction.
When should I choose Electrode Rod Holders instead of Electrode Foil Holders?
Choose Electrode Rod Holders when your practicals use cylindrical electrodes such as carbon rods, and the foil version when you work with flat metal foils. Both use the same strip, clip and 4 mm socket design, so many labs stock both.
How should Electrode Rod Holders be cared for?
After each practical, rinse Electrode Rod Holders in clean water and let them dry before storage, paying attention to the crocodile clips. Handle carbon rods gently when clipping them in, because they can snap if gripped too hard.
Who manufactures Electrode Rod Holders?
Electrode Rod Holders are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled directly by the manufacturer.
Can Electrode Rod Holders be ordered in bulk or for export?
Yes. Electrode Rod Holders are supplied in bulk to schools, colleges, dealers and institutions across India and international markets. Share the product code SLE/PHY/164, the number of packs and the delivery destination for a quotation.
Request a Quote
To request a quotation for Electrode Rod Holders (SLE/PHY/164), use our contact page or place them in the enquiry cart with any rods, leads or power supplies. You receive the quotation directly from the manufacturer.
Last updated: 24 September 2026
