- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Dressing Trolley SS 2 Trays
Dressing Trolley SS 2 Trays (Product Code: SLE/HF/22) is a stainless steel ward trolley with two flat shelves edged by guard rails and a push-bar handle, built to carry dressing packs, lotions, bowls and instruments from bed to bed. Nurses on surgical and general wards, outpatient dressing rooms and nursing training labs rely on it for daily wound-care rounds. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a scientific instruments manufacturer in India with a stainless steel hospital furniture line.
Specifications
| Parameter | Detail |
|---|---|
| Type | Dressing trolley with two flat, non-removable shelves |
| Guard rails | On top and bottom shelves, along one length and both widths |
| Shelf finish | Smooth, for easy cleaning; 1.35–1.5 mm thickness |
| Handle | Push-bar handle on one short side |
| Frame and trays | Austenitic stainless steel 18/10; frame 2.8–3 cm (outside, across), 1.5 mm thickness |
| Bracing | Transfer bars connect the lower distal portions of all 4 legs |
| Castors | Heavy carriage on 4 swivel castors, 2 with total-lock brake (wheel and rotational lock), both at the push-bar handle side |
| Castor construction | Single mold-on wheel, non-hooded for easy maintenance; sealed bearings in swivel and wheel; ball-bearing swivel; frame/bracket steel or nylon |
| Castor wheel size | 2.3–3 x 10 cm (w x diameter) |
| Protection | Bumpers at all four corners |
| Overall size | 81–99 x 50–60 x 90–110 cm |
| Carrying capacity | 100–120 kg |
| Environment | High resistance to corrosion (tropical environment) |
Typical Use
A dressing round usually starts at the clean utility room: sterile packs and clean supplies go on the top shelf, while the bottom shelf takes lotions, spare gauze and a container for used items. The guard rails keep bowls and bottles from sliding off as the trolley is pushed along the ward by its handle, and the corner bumpers protect door frames and bed ends. At each bed the nurse applies the two brakes at the handle end so the trolley stays put while the wound is dressed.
Nursing schools use the same trolley to teach aseptic set-up and the order of a dressing procedure. Wash both shelves with detergent after the round, disinfect them, and dry fully — as with any routine lab equipment maintenance in India’s humid seasons, leaving water standing on steel invites spotting.
Manufacturer
Jain Scientific Equipments Private Limited trades as ScienceLab and is based in Ambala, Haryana. The company profile has more information.
Related Hospital Furniture
Supplies and furniture that go with a dressing trolley on ward rounds:
- Dressing Tray Stainless Steel — tray for laying out a dressing set on the top shelf
- Surgical Instruments, Dressing /SET — the instruments a dressing round needs
- Bowl Stainless Steel — for lotions and cleaning solutions
- Kick Bucket SS On Castors — mobile bucket for soiled dressings
- Instrument Table SS 2 Trays On Castors — rimless flat-top alternative for procedure rooms
Other trolleys and stands are in Hospital Furniture.
Frequently Asked Questions
How is this different from the two-tray instrument table?
The dressing trolley has guard rails on both shelves, a push-bar handle and corner bumpers for moving around a ward. The instrument table has a rimless flat top and anti-static wheels, suited to standing beside a couch or operating table.
What are its dimensions?
Overall 81–99 x 50–60 x 90–110 cm, with 1.35–1.5 mm stainless steel shelves.
How much can it carry?
100–120 kg across both shelves.
Where are the brakes?
Two total-lock castors, both at the push-bar end, so the nurse can lock the trolley without walking round it.
Can the shelves be taken out for cleaning?
No — they are fixed to the frame, but their smooth finish makes wiping and disinfecting in place straightforward.
What warranty is given?
Warranty terms are set out in the quotation; ask us through the contact page for details.
What do you need to prepare a quotation?
Quantity, delivery location and any vendor forms your hospital requires. We supply buyers in India and international markets.
Request a Quote
Send your ward requirement via the contact page, or place the trolley and matching trays in the enquiry cart for a single combined quotation.
Last updated: 24 September 2026
