Computerised Tensile Tester Manufacturer,Supplier and Exporter in India

Computerised Tensile Tester (Product Code: SLE/ET/02) is a motorised tensile testing instrument used to pull a specimen to failure while recording its load, yield and elongation in materials and polymer testing laboratories. Engineering colleges and quality-control labs use it for loads up to 500 kg on one load cell, with up to 1000 mm of cross travel and speeds from 10 to 500 mm/minute. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its range of test and measurement instruments in India.

Specifications

What Is the Computerised Tensile Tester Used For?

A tensile test holds a strip or shaped specimen at both ends and draws the ends apart at a steady rate until the specimen breaks. On this instrument the microcontroller follows the load cell throughout the pull and shows peak load, break load, tensile strength at peak and at break, yield load, yield stress and percentage elongation at peak, so students and technicians read results directly instead of working them out from a chart.

Typical exercises include comparing the strength and ductility of different materials, relating yield stress to peak strength, and checking how the pulling rate changes a result. Use slower speeds near 10 mm/minute for stiff or brittle samples and faster settings for very extensible ones, measure specimen width and thickness carefully because tensile strength is load divided by cross-sectional area, and keep expected loads inside the 500 kg rating. It is useful engineering lab equipment in India for strength-of-materials and polymer courses.

What to Specify When Ordering

• The highest load your specimens will reach, confirming it is within the 500 kg capacity
• Specimen material, shape and size, so gripping arrangements can be confirmed with us
• The test speeds your method requires within the 10 to 500 mm/minute range
• Mains supply at the installation site (listed supply: 230 V, 50 Hz, single phase)
• Quantity and delivery location in India or abroad

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited of Ambala, Haryana. The company supplies this computerised tensile tester to engineering colleges, polytechnics, training institutes and industrial quality-control laboratories in India and international markets; questions about grips, spares or service support can be raised with us when you enquire.

For vendor registration and export paperwork, buyers can quote the supplying company’s Importer-Exporter Code AAECJ8618A (DGFT) and GSTIN 06AAECJ8618A1ZT. More about the company is on the ScienceLab company profile.

Related Testing Equipment

Other instruments that sit alongside this tester in a plastics or materials testing laboratory:

• Computerised Izod Impact Tester — measures notched impact strength, complementing slow-pull tensile data.
• Melt Flow Index Tester — checks the flow behaviour of a polymer grade before test pieces are moulded from it.
• Computerised VSP & HDT Apparatus — adds softening and heat deflection temperatures to the material profile.
• Tensile Tester Kit — a kit-based option for classroom tensile experiments.

Browse the full range on the Testing Equipments category page.

Frequently Asked Questions

What results does the Computerised Tensile Tester display?
The Computerised Tensile Tester shows peak load, break load, tensile strength at peak, tensile strength at break, yield load, yield stress and percentage elongation at peak directly on its microcontroller display, so each result is available as soon as the specimen fails.

What load capacity and travel does the Computerised Tensile Tester offer?
The Computerised Tensile Tester (SLE/ET/02) measures loads up to 500 kg through one load cell and provides cross travel of up to 1000 mm, which leaves room for specimens that stretch considerably before they break.

Can the test speed be adjusted?
Yes. The Computerised Tensile Tester has a variable speed from 10 mm/minute to 500 mm/minute, so the pulling rate can be matched to the specimen material and to the test method followed in your laboratory.

What power supply does the Computerised Tensile Tester need?
The Computerised Tensile Tester is listed for 230 volts, 50 Hz, single-phase mains. If your laboratory has a different supply, mention it in your enquiry so the requirement can be discussed before an order is placed.

Who supplies the Computerised Tensile Tester?
The Computerised Tensile Tester is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to engineering colleges, polytechnics and testing laboratories across India and international markets, with quotations issued directly by the company.

Is a calibration certificate available for the load cell?
Calibration-certificate availability for the Computerised Tensile Tester should be discussed with us before ordering. State your documentation needs through the contact page and we will confirm what can accompany the instrument.

What information does a quotation request need?
For a Computerised Tensile Tester quotation, give the quantity, delivery location, specimen types and highest expected loads, and any documentation requirements. Send these through the contact page or add the product to the enquiry cart.

Request a Quote

To receive pricing and delivery details for the Computerised Tensile Tester, write to us through the contact page or add it to the enquiry cart. ScienceLab supplies institutions, dealers and importers in India and international markets.

Last updated: 24 September 2026