Wet Cement/Concrete Moisture Meter (Product Code: SLE/CE/44) is a microwave moisture meter used to measure the moisture content of wet concrete by sensing its complex dielectric constant through a prong probe, in concrete laboratories and quality-control work. Two units cover the water/cement ratios found in wet concrete: the two-prong Type R for approximately 0.35 to 0.65, and a five-prong version for low ratios of approximately 0.25 to 0.5. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Measuring principle | Microwave sensing of the complex dielectric constant of material in contact with the prongs |
| Display | Integrated microprocessor; moisture content displayed directly |
| Type R | Two-prong probe; normal water/cement ratios, approx. 0.35 to 0.65 |
| Low-ratio unit | Five-prong probe; low water/cement ratios, approx. 0.25 to 0.5 |
| Pre-set calibration | Standard Type I, II and III cements |
| User programs | Up to ten different mix designs; created with a built-in calibration process, no external computing device needed |
| Readings per test | An average of five to ten readings is normally taken |
| Memory | Over 150 readings, stored with time and date |
| Data transfer | USB interface to a personal computer running the meter software |
| Application | Fresh wet cement, concrete and mortar |
| Product code | SLE/CE/44 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
The water content of fresh concrete governs its strength and durability, yet it can drift from the design through wet aggregates or added water at the mixer. Because the dielectric constant of water is four to eight times greater than that of most aggregates and cements, changes in water content directly affect the sensor output. The meter converts that output with its microprocessor and shows the moisture reading at once, so a batch can be checked before it is placed.
Insert the probe fully into a representative sample and take five to ten readings to obtain a valid average. For the highest accuracy, program the unit for the materials you actually use; the calibration routine creates these user programs on the meter itself. Stored readings, complete with time and date, can later be downloaded over USB for records. It is a useful moisture meter for any concrete laboratory looking to tighten mix control.
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, manufactures the Wet Cement/Concrete Moisture Meter to concrete laboratories, ready-mix producers, research institutes, dealers and importers in India and international markets. ScienceLab manufactures it and can quote it together with fresh-concrete test sets and moulds from the ScienceLab range. See the ScienceLab profile to learn more about the company.
Moisture readings are most meaningful when read alongside other fresh-concrete checks:
Visit the Civil Engineering Lab Equipment category for more.
What does the Wet Cement/Concrete Moisture Meter measure?
The Wet Cement/Concrete Moisture Meter measures the moisture content of wet concrete using a microwave sensor that reads the complex dielectric constant of the material between its prongs. An integrated microprocessor converts this and displays the moisture content directly, relating it to the water/cement ratio of the mix.
Which meter unit do I need?
Two Wet Cement/Concrete Moisture Meter units are available. The Type R, with a two-prong probe, handles normal water/cement ratios of approximately 0.35 to 0.65, while the five-prong unit handles low ratios of approximately 0.25 to 0.5. Choose according to the mixes your laboratory tests.
Which cements is the meter calibrated for?
The Wet Cement/Concrete Moisture Meter units come calibrated for standard Type I, II and III cements. For the highest accuracy, the user should program the unit for the actual materials; up to ten different mix designs can be stored using the meter's own calibration process.
How many readings should be taken per sample?
With the Wet Cement/Concrete Moisture Meter, an average of five to ten readings is normally taken to ensure a valid result. Taking readings at different points in the sample evens out local variations caused by coarse aggregate particles near the prongs.
Can the meter store and transfer data?
Yes. The Wet Cement/Concrete Moisture Meter can store over 150 readings, each with the time and date for future reference. Data can be recalled through a USB interface to a personal computer running the meter software, which simplifies record keeping for quality-control files.
Who manufactures the Wet Cement/Concrete Moisture Meter?
The Wet Cement/Concrete Moisture Meter is manufactured by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, Haryana, India. The company manufactures it for laboratories, producers, dealers and importers and can combine it with other concrete testing equipment on one quotation.
To get a quotation for the Wet Cement/Concrete Moisture Meter, tell us which unit you need through the contact page or add it to the enquiry cart.
Last updated: 20 November 2026