Bosshead For Frames, 18/10 Stainless Steel Manufacturer,Supplier and Exporter in India

Bosshead For Frames, 18/10 Stainless Steel (Product Code: SLE/BH/09) is a right-angle stainless steel connector used to mount rods on the tubes of a laboratory support frame, so clamps and rings can be placed at several points of one rig. It is listed with d/Ø 13,5, a 90° angle and thread 6, with a ring or socket screw, and suits chemistry labs where glass trains stay assembled. The maker is Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer producing it at its own factory in Ambala, India.

Specifications

What Is the Stainless Steel Frame Bosshead Used For?

A frame takes over when one retort stand is not enough: a distillation train where flask, condenser and receiver each need their own support, a reflux setup that runs long heating steps, a rack of chromatography columns, or a demonstration rig with several hanging points. Bossheads for frames lock onto the frame tubes and carry horizontal or vertical rods at a true right angle, turning the frame into a grid on which clamps can be placed exactly where the glassware sits.

Plan the positions before tightening anything, then fix the frame side first and the rod side second. A ring screw is handy where positions are changed often by hand, while a socket screw suits setups that should stay fixed once assembled. As one of the core lab equipment accessories for wet chemistry rooms, the 18/10 stainless body copes well with acid fumes, spills and repeated washing.

What to Specify When Ordering

• Which screw you want fitted: a ring screw or a socket screw.
• Frame tube and rod sizes, to confirm the d/Ø 13,5 and thread 6 listing.
• Number of connectors needed per frame.
• Frame tubes, rods and clamps to be quoted in the same enquiry.

OEM Manufacturer

As the OEM, Jain Scientific Equipments Private Limited — the company trading as ScienceLab — makes this frame bosshead at its own licensed factory at Saha, Ambala, Haryana, India, and sells it directly to laboratories, institutions, dealers and importers. Tender and purchase teams who register vendors can note GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Background on the business is on the company profile.

Related Laboratory Equipment

These items are used with a frame bosshead when building a multi-point support:

• H-Frame Complete — a ready frame system to extend with extra bossheads.
• Base Frame tube, 18/10 Stainless Steel — stainless frame tubing in V or H form to build on.
• Rods For Stand Bases — stainless rods for the cross members held at 90°.
• Retort Clamp Standard 18/10 Stainless Steel — a matching stainless clamp to carry flasks and condensers.
• Bosshead For Frames, Malleable Cast Iron, Chromium Plated — the chromium-plated cast iron alternative.

Compare other connectors in the Bosshead category, or find frames and rods under Stand bases, Rods and Rings.

Frequently Asked Questions

What does the Bosshead For Frames, 18/10 Stainless Steel connect?
The Bosshead For Frames, 18/10 Stainless Steel connects a rod to a frame tube at a fixed 90°, so one laboratory frame can carry several clamps, rings and cross rods instead of relying on separate retort stands.

Which screw type comes with the Bosshead For Frames, 18/10 Stainless Steel?
The listing for the Bosshead For Frames, 18/10 Stainless Steel names both a ring screw and a socket screw. Tell ScienceLab which you prefer when you enquire, and the configuration will be stated in your quotation.

What diameter and thread does the Bosshead For Frames, 18/10 Stainless Steel have?
The Bosshead For Frames, 18/10 Stainless Steel is catalogued with d/Ø 13,5 and thread 6; no unit is given. Share your frame tube and rod sizes via the contact page so compatibility can be confirmed before you order.

Can the Bosshead For Frames, 18/10 Stainless Steel hold a rod at other angles?
No. The Bosshead For Frames, 18/10 Stainless Steel is a fixed right-angle connector designed to keep rods square to the frame. For adjustable positions, choose one of the swivel bossheads listed in the Bosshead category.

Who manufactures the Bosshead For Frames, 18/10 Stainless Steel?
The Bosshead For Frames, 18/10 Stainless Steel comes from its OEM, Jain Scientific Equipments Pvt Ltd (ScienceLab), which makes it at its licensed factory at Saha, Ambala, Haryana, India, and can provide GST and LEI details for vendor registration.

How do I keep the Bosshead For Frames, 18/10 Stainless Steel in good condition?
Rinse chemical residues off the Bosshead For Frames, 18/10 Stainless Steel, dry it and clean the thread now and then so the screw runs smoothly. Stainless steel needs no painting or coating to stay serviceable.

Does ScienceLab supply the Bosshead For Frames, 18/10 Stainless Steel outside India?
Yes. ScienceLab supplies the Bosshead For Frames, 18/10 Stainless Steel to institutions in India and international markets; include code SLE/BH/09, the quantity and the destination in your enquiry.

Request a Quote

To get a quotation for the Bosshead For Frames, 18/10 Stainless Steel for your frame build, contact ScienceLab or add it to the enquiry cart with the frame parts and clamps on your list; quotations are issued by the manufacturer.

Last updated: 24 September 2026