- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Bilirubin Meter
Bilirubin Meter (Product Code: SLE/CL/75) is a fully automatic bench-top analyser that measures bilirubin in just 10ul of whole blood and gives a result in 3 seconds, shown on a digital alphanumeric display and printed on its integrated printer. It is suited to intensive care, emergency departments and other low-volume settings in hospitals, and is widely used where newborns are monitored for jaundice. Auto-calibration, self-diagnosis and quality-control flags on abnormal results reduce routine upkeep. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, together with a starter set of accessories and consumables.
Specifications
| Parameter | Detail |
|---|---|
| Platform | Bench-top, open, fully automatic system |
| Sample type | Whole blood |
| Sample volume | 10ul |
| Analysis time | 3 seconds |
| Accuracy of measurement | Approximately 5% |
| Display and output | Digital alphanumeric display with integrated printer |
| Data management | Built-in software; data can be printed or sent to a PC |
| Quality control | Flags abnormal results; auto-calibration |
| Calibration | Automated calibration and self-diagnosis |
| Energy saving | Stand-by mode after 30 minutes |
| Operating conditions | Tolerates humidity up to 80%; operating temperature 15°C to 35°C |
| Power requirements | 220V/50Hz, with voltage surge protection |
| Suitable for | Intensive care, emergency departments or other low-volume hospital settings |
Standard accessories, consumables and parts supplied to operate the equipment:
- CD with user manual (English)
- 1 x thermal paper roll
- Fuse kit
- AC power cable
- Dust cover
- 100 x haematocrit micro capillary tubes
- 1 x plate of capillary sealing plasticine
Typical Use
A heel-prick or finger-prick drop, or a small venous sample, is drawn into one of the haematocrit micro capillary tubes, one end is closed with the sealing plasticine, and the sample is presented to the meter as described in the user manual. Three seconds later the bilirubin value appears on the display and can be printed straight onto thermal paper for the patient file, or passed to a PC through the built-in data management software. Because the meter calibrates itself, runs a self-diagnosis and flags abnormal results, nursing and laboratory staff can run it at the bedside area of a ward without a dedicated operator.
When hospitals ask a lab instruments supplier in India about a bilirubin meter, the usual questions concern sample volume, turnaround and running supplies. This unit needs only 10ul, reports in seconds, drops into stand-by after 30 minutes idle, and arrives with 100 capillaries and a paper roll so testing can start on the day of installation.
Supplier
Hospitals receive this meter from Jain Scientific Equipments Private Limited, which operates under the ScienceLab name from Ambala, Haryana and supplies clinical instruments alongside its laboratory apparatus. For institutional and tender buyers who need vendor registration details: GSTIN 06AAECJ8618A1ZT · LEI 3358004HRD1JIVXKYX49. More about the company is on the ScienceLab profile.
Related Clinical Laboratory Equipment
Items that support bilirubin sampling and testing:
- Safety Lancet Disposable 2.4 mm — single-use lancet for skin-puncture sampling
- Capillary Heparin Tube — additional capillaries for collection; confirm the type suits the meter
- Capillary Tube Sealant — for sealing capillaries once the supplied plasticine is used up
- Haematocrit Centrifuge — for units that also measure packed cell volume from capillary samples
- Gloves W/o Powder Nitrile Disposable — hand protection while handling blood
See our Clinical Laboratory range for more point-of-care and sampling items.
Frequently Asked Questions
How much blood does a test need?
10ul of whole blood per measurement.
How fast and how accurate is it?
Analysis takes 3 seconds, and the accuracy of measurement is approximately 5%.
What is included with the meter?
A CD with the English user manual, 1 thermal paper roll, a fuse kit, AC power cable, dust cover, 100 haematocrit micro capillary tubes and 1 plate of capillary sealing plasticine.
Can results be stored or transferred?
Yes. Built-in software handles data management, and results can be printed or sent to a PC.
Does it need manual calibration?
It performs automated calibration and self-diagnosis. If your laboratory needs a calibration certificate, please discuss its availability with us before ordering.
What conditions and power does it need?
It tolerates humidity up to 80% and operating temperatures from 15°C to 35°C, on a 220V/50Hz supply with voltage surge protection.
Can I reorder paper rolls and capillaries?
Please contact us with the quantities you need and we will confirm availability and warranty terms at the same time.
Request a Quote
To request a quotation for the Bilirubin Meter, use our contact page or add it to the enquiry cart. We supply hospitals and laboratories in India and international markets.
Last updated: 24 September 2026
