- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Battery Clip, PP3
Battery Clip, PP3 (Product Code: SLE/PHY/21) is a standard snap-on battery connector used to take power from a PP3 battery into simple circuits in school physics and electronics labs. It has 150 mm leads and fits both PP3 batteries and press-stud type battery holders, so one clip style serves both power options on the bench. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as a basic part for any electricity experiment kit a school assembles.
Specifications
| Parameter | Detail |
|---|---|
| Type | Standard PP3 battery clip |
| Lead length | 150 mm |
| Fits | PP3 batteries; press-stud type battery holders |
| Product code | SLE/PHY/21 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the PP3 Battery Clip Used For?
A PP3 battery has two press-stud terminals of different sizes at one end, and the clip snaps onto them in only one orientation, so the battery cannot be connected the wrong way round at the clip. The 150 mm leads then carry the supply to the rest of the circuit, whether that is a bulb holder, a buzzer, a small motor or a breadboard. The same clip also snaps onto press-stud type battery holders, which lets a class switch between a PP3 battery and a holder of cells without rewiring.
Before wiring, note which lead goes to the positive terminal and keep that polarity throughout the circuit. Never let the two lead ends touch while a battery is attached, as that shorts the battery and heats the wires. Unclip the battery at the end of each lesson so it does not drain in storage, and bend the leads gently so the joints at the clip last longer.
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies the Battery Clip, PP3 from Ambala, Haryana, India. The company sources it as a standard component and ships it with other electricity and circuit items, so a school or dealer can place a single order for the whole circuit list. Ask us about quantities for class kits or for dealer stock. Company information is on the ScienceLab profile page.
Related Physics Lab Equipment
These items complete a simple battery circuit with the PP3 clip:
- Battery Snap with Crocodile Clip — a battery connector with crocodile clips already attached for clip-on wiring.
- Crocodile Clip — for making quick connections at the ends of the leads.
- MES Bulb Holder — a bulb holder for a first lamp circuit.
- Circuits Kit Push Switch — lets students switch the circuit on and off.
- Battery Holder, C — a holder for C cells when a different battery format is wanted.
More circuit and electricity items are in Physics Lab Equipment.
Frequently Asked Questions
What is the Battery Clip, PP3 used for?
The Battery Clip, PP3 connects a PP3 battery, or a press-stud type battery holder, to a circuit. It snaps onto the battery terminals and carries the supply through its 150 mm leads to bulbs, buzzers, motors or other components in school experiments.
How long are the leads on the PP3 battery clip?
The leads on the Battery Clip, PP3 are 150 mm long. That length reaches comfortably across a small circuit board or bench layout while keeping the wiring short and tidy for student circuits.
Does the PP3 battery clip fit battery holders?
Yes. The Battery Clip, PP3 can be used with PP3 batteries or with press-stud type battery holders, so the same clip works whether a class uses a single PP3 battery or a holder of cells with press-stud terminals.
How can short circuits be avoided with the PP3 clip?
With the Battery Clip, PP3 attached to a battery, keep the two lead ends apart and connect them only into a complete circuit. Unclip the battery after use so it does not drain, and check the leads for damaged insulation before each lesson.
Who supplies the Battery Clip, PP3?
The Battery Clip, PP3 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges, dealers and importers in India and international markets, often together with other circuit components on the same order.
What should I include when asking for a quote on SLE/PHY/21?
When asking for a quote on the Battery Clip, PP3, code SLE/PHY/21, give the quantity required, the delivery location and any other circuit items you want on the same order. Send the request through the ScienceLab contact page or the enquiry cart.
Request a Quote
Add the Battery Clip, PP3 to the enquiry cart with the rest of your circuit components, or send quantities through the contact page for a quotation.
Last updated: 24 September 2026
