- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
3 Finger Clamps With Shaft
3 Finger Clamps With Shaft (Product Code: SLE/RC/04) is a chromium-plated three-finger clamp on its own shaft, used to hold slim glassware such as test tubes, burettes and small flasks on a laboratory stand. Its PVC-coated fingers open to a span of 0–35 mm or 0–60 mm, set by two regulating screws that adjust independently, on a 150 mm clamp with a 10 mm shaft. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | Chromium plated |
| Fingers | 3, PVC coated |
| Span adjustment | Span width d independently adjustable by 2 regulating screws |
| Length A | 150 mm |
| Shaft D/Ø | 10 mm |
| Span d/Ø | 0–35 mm or 0–60 mm (two versions) |
| Product code | SLE/RC/04 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 3 Finger Clamp With Shaft Used For?
With spans that start at zero, these clamps are sized for slim items: the 0–35 mm version suits test tubes, burettes and narrow condensers, while the 0–60 mm version takes flask necks and small bottles. The shaft slots into a bosshead on a support rod, and the independent regulating screws let the fingers close evenly around the item.
Chromium plating gives the metal body a bright surface that is easy to wipe down, while the PVC coating on the fingers keeps bare metal off the glass. In titration practicals the 0–35 mm version can also serve as a burette clamp. Keep the PVC-coated fingers away from open flames, and release the screws before removing hot glassware.
What to Specify When Ordering
- Span version — 0–35 mm for tubes and burettes, or 0–60 mm for flask necks and small bottles.
- Quantity — how many clamps of each span per bench or stand.
- Bossheads — check that your fittings accept a 10 mm shaft.
- Stands or burette holders — add items from the related list if you are equipping new titration stations.
OEM Manufacturer
Jain Scientific Equipments Private Limited, known by its brand ScienceLab, is the OEM of the 3 Finger Clamps With Shaft and produces them at its own licensed factory at Saha, Ambala, Haryana, India. School science departments, university labs, stockists and importers in India and international markets get these clamps factory-direct instead of from a reseller. Spares and repeat batches are organised by the manufacturer, so ask us whenever you need them. Visit the ScienceLab company profile to learn more.
Related Retort Clamps and Holders
These holders and clamps are often ordered with the 3 Finger Clamps With Shaft:
- Burette Clamps — a dedicated holder for titration burettes.
- Burette Clamps Light Weight — a lighter burette holder for student benches.
- Retort Clamp Three Finger — a three-finger alternative from the chemistry range.
- Vertical Stand With 3 Clamps — a ready stand when several items must be held at once.
- Retort Clamp 3 Prongs — a red PVC clamp with a wider listed range.
Browse the Retort Clamp category for every clamp style.
Frequently Asked Questions
What spans are available for the 3 Finger Clamps With Shaft?
The 3 Finger Clamps With Shaft come in two spans, 0–35 mm and 0–60 mm, both on a 150 mm long clamp with a 10 mm shaft. Choose the smaller one for test tubes and burettes and the larger one for flask necks.
What is the finish of the 3 Finger Clamps With Shaft?
The 3 Finger Clamps With Shaft have a chromium-plated body with PVC-coated fingers. The plating keeps the metal surface bright and easy to wipe, and the PVC coating stops bare metal from touching the glassware being held.
How do the regulating screws on the 3 Finger Clamps With Shaft work?
The span width of the 3 Finger Clamps With Shaft is adjusted by 2 regulating screws that work independently, letting you close the fingers evenly around a vessel or offset the grip slightly where a setup is not perfectly aligned.
Who manufactures the 3 Finger Clamps With Shaft?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the 3 Finger Clamps With Shaft as the OEM, producing them at its own licensed factory at Saha, Ambala, Haryana, India, and quoting directly to laboratories, dealers and importers.
Will the 3 Finger Clamps With Shaft fit my bosshead?
The 3 Finger Clamps With Shaft have a 10 mm shaft, so they fit a bosshead whose opening accepts that diameter. If you are unsure about your existing fittings, send their details through the contact page and we will advise.
What should an enquiry for 3 Finger Clamps With Shaft include?
An enquiry for 3 Finger Clamps With Shaft should state how many clamps of each span (0–35 or 0–60 mm) you need, any bossheads or stands to go with them, and the delivery location in India or abroad, so the manufacturer can quote in one step.
Request a Quote
To order the 3 Finger Clamps With Shaft, send your span choice and quantity through the contact page or add the item to the enquiry cart. ScienceLab replies as the manufacturer with a direct quotation.
Last updated: 24 September 2026
