Hotplate & Magnetic Stirrer Pro Manufacturer,Supplier and Exporter in India

Hotplate & Magnetic Stirrer Pro (Product Code: SLE/LHP/07) is a digital, PID-controlled stirring hotplate that heats to 340°C and stirs from 30 to 1500 rpm on a ceramic-coated 135 x 135 mm plate. Its moulded stainless steel casing, digital display and socket for an external temperature sensor let it display and control the actual liquid temperature, which is why it is used in chemical synthesis, physical and chemical analysis and bio-pharmaceutical work. Labs looking for a magnetic stirrer India researchers can rely on for repeatable settings will find it set up for clamped, sensor-controlled experiments. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

The Pro model is built for experiments that need a clamped set-up. Screw a retort rod into the integral fitting, or slide a standard retort base under the unit, and you can hold a condenser, thermometer or sensor directly over the vessel without a separate stand crowding the bench. With an external sensor in the liquid, the PID control works to the real solution temperature, which makes it well suited to syntheses at a set temperature, enzyme or dissolution studies, and preparing media that must not overheat.

In pharmacy college lab equipment lists and research labs alike, the low 55 mm height and the option to store units on their side save space between sessions. After switching off, watch the hot warning light: it remains active even when the unit is unplugged, so do not pack it away or touch the plate until the light indicates it is safe.

Manufacturer

Our Ambala, Haryana company, Jain Scientific Equipments Private Limited, offers this Pro stirring hotplate under the ScienceLab trading name as part of its laboratory instrument range. Find out more about us on the company profile.

Related Laboratory Equipment

To build a complete clamped heating and stirring set-up, consider:

• Retort Stand — a stand whose base can slide under the unit to support glassware above the plate.
• A-Shape Retort Stand Base — an alternative base for mounting rods beside the hotplate.
• Thermometer Clamp — to hold a thermometer or sensor at a fixed depth in the liquid.
• Magnetic Stirrer Bar — bars matched to the flask or beaker you are stirring.
• Hotplate & Magnetic Stirrer — the scale-controlled standard model for simpler routine work.

Find more heating equipment in our Hot Plates category.

Frequently Asked Questions

How accurate are the speed and temperature settings?
Speed accuracy is ±1% and temperature setting accuracy is ±1 °C. Using an external sensor in the liquid gives the most representative control of sample temperature.

Is the external temperature sensor supplied?
The hotplate is suitable for an external sensor and has a socket to fit a temperature controller. Please confirm whether a sensor is included in your order through the contact page.

What electrical supply does it use?
The electrical supply is listed as 240V. Let us know your local mains supply when you enquire.

How does it differ from the standard Hotplate & Magnetic Stirrer?
The Pro has a digital display and PID heating control with a sensor socket, while the standard model uses scale-marked controls. The Pro also lists a retort rod fitting, a hot warning light and a speed range of 30 to 1500 rpm.

How should the unit be cleaned and stored?
Wait until the hot warning light shows it is safe, wipe the ceramic-coated plate and stainless steel casing with a damp cloth, and store the unit upright or on its side.

What about calibration certificates and warranty?
Both should be discussed with us before ordering; warranty terms are set out in our quotation for customers in India and international markets.

Request a Quote

For pricing on the Hotplate & Magnetic Stirrer Pro, reach us through the contact page or add it to your enquiry cart with stands and stirrer bars.

Last updated: 24 September 2026