Distillation Unit With Tank Manufacturer,Supplier and Exporter in India

Distillation Unit With Tank (Product Code: SLE/CL/60) is an automatic water purification system that distils raw potable tap water and collects the distillate in an approximately 4 L tank, giving water with an output conductivity of about 2 µS/cm at 25 °C. Clinical, microbiology and teaching laboratories install it as their lab water still in India, supplying the purified water needed for reagents, stains, buffers and final glassware rinses. The unit is built by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana.

Specifications

Typical Use

The unit is connected to a potable water line within the stated pressure and temperature limits and then runs on its own: it heats the feed water, condenses the steam and fills the storage tank, while the indicators show whether it is powered, in standby or processing, and how full the tank is. Laboratory staff draw water from the tank to make up stains and reagent dilutions, prepare buffers, fill water baths and humidity trays, and give washed glassware a final rinse that dries without mineral spots.

In areas with hard tap water, periodic descaling of the boiling section keeps output steady; ask us for the cleaning routine suited to your unit. For laboratories that do not need a large water distillation plant in India, the wall-mount option lets this unit sit near the water point without taking up bench space. Use stored water promptly rather than keeping it for long periods.

Manufacturer

Jain Scientific Equipments Private Limited designs and builds water stills, baths and other laboratory utilities in Ambala, Haryana, and markets them under the ScienceLab trading name. Learn more on our company profile page.

Related Clinical Laboratory Equipment

Equipment that uses or dispenses the water this unit produces:

• Wash Bottle LDPE with Narrow Mouth — dispenses distilled water for rinsing and making up volumes.
• Reagent Bottle, Narrow Mouth — stores prepared solutions made with distilled water.
• Water bath, 7 L — filling the bath with distilled water limits scale build-up.
• Hot Plate With Stirrer — dissolves salts in distilled water when preparing buffers and reagents.
• Drying Rack Glass & Plastic Ware — air-dries glassware after its final distilled-water rinse.

Discover more in our Clinical Laboratory category.

Frequently Asked Questions

What quality of water does the unit produce?
The output conductivity is approximately 2 µS/cm at 25 °C. If your application needs a different grade, tell us so we can advise.

What feed water connection is required?
Raw potable water at 3 bar to 7 bar and between 4 °C and 35 °C. A plumber can connect it to a normal tap line within these limits.

What happens if the water supply stops?
A thermostatic low water cut-off protects the heating element, and the unit also has thermostatic control and overheat protection.

How much distilled water can it produce per hour?
The hourly output rate is not listed here. Please ask us through the contact page and we will confirm it for the model supplied.

What power supply does it need?
230 V / 50 Hz, with voltage surge protection built in. Contact us if your site runs on a different supply.

Can it be mounted on a wall?
Yes. It can be installed free-standing or wall mounted, whichever suits the space near your water point.

Are installation support and warranty terms available?
Installation guidance and warranty terms are confirmed with each quotation; share your site details with us when you enquire.

Request a Quote

To receive a quotation for the Distillation Unit With Tank, send your site details through the contact page or add it to the enquiry cart with the bottles and baths you plan to supply with distilled water.

Last updated: 24 September 2026