- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Engineering Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Bioenergy
- Dentistry
- Earth Science
- Geography Lab Equipment
- Gloves
- Greenhouse
- Safety Lab Coat
- Laboratory
- Laser
- Mask
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Hospital Lab Equipment
- Nutrition
- Water and Sanitation
- Laboratory Glassware
Injections are among the most common health care procedures, administered in developing and transitional countries are used in curative care or as treatment for a condition, 3% are to provide immunizations, and the rest are used for other purposes, including blood transfusions. The term injection is sometimes used synonymously with inoculation, but injection does not only refer to the act of inoculation. Injections generally administer a medication as a bolus (or one-time) dose, but can also be used for continuous drug administration. After injection, a medication may be designed to be released slowly, called a depot injection, which can produce long-lasting effects. Injection Supplies Manufacturers, Suppliers and Exporters in Ambala India, Injection Supplies Manufacturers in Ambala India, Hospital Lab Equipments Manufacturer in Ambala India
Syringe, Insulin, 1ml, U-100
General Description:-
Insulin Syringe, 1ml, U-100, three pieces: barrel with nozzle, stopper and piston/plunger with stainless steel fine needle and a needle orange cap.
Technical specifications:-
Syringe nominal capacity (ml): 1ml
Syringe Unit scale (Units): U-100
Contact Science Lab for your Educational School Science Lab Equipments. We are best geography lab equipments manufacturers, geography lab equipments suppliers, geography lab models suppliers, high school biology lab equipment india, high school biology lab equipment manufacturers, high school chemistry lab equipment manufacturers.
Syringe, Disposable, 20ml, Sterile
General Description:-
Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Intended use: inject fluids into, or withdraw fluids from, the body
Technical specifications:-
Syringe capacity: 20ml
Contact Science Lab for your Educational School Science Lab Equipments. We are best high school maths lab kit manufacturers, high school physics lab equipment, high school science kits exporters, high school science lab equipment, high school science lab equipment manufacturers, high, school science lab equipments suppliers.
Syringe, Disposable, 10ml, Sterile
General Description:-
Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Intended use: inject fluids into, or withdraw fluids from, the body
Technical specifications:-
Syringe capacity: 10ml
Syringe graduation: Graduated scale on the barrel, easy to read. Scale intervals of 0.2 or 0.5 or 1.0ml. Graduation lines of 1.0 or 5.0 ml
Contact Science Lab for your Educational School Science Lab Equipments. We are best indian biology lab equipments, lab equipment exporters, lab equipments exporter, lab equipments manufacturers, lab instruments manufacturers, laboratory equipment dealer.
Syringe, Disposable, 2ml, Sterile
General Description:-
Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Technical specifications:-
Syringe capacity: 2ml
Intended use: inject fluids into, or withdraw fluids from, the body
Syringe graduation: Graduated scale on the barrel, easy to read. Scale intervals of 0.1 or 0.2ml. Graduation lines of 1.0ml volume increment.
Contact Science Lab for your Educational School Science Lab Equipments. We are best laboratory equipments suppliers, laboratory glass equipments, math lab kits, mathematics lab equipment manufacturers, mathematics lab equipments, mathematics lab equipments manufacturers.
Syringe, Disposable, 1ml, Sterile
General Description:-
Syringe, three pieces: barrel with luer nozzle, stopper and piston/plunger.
Intended use: inject fluids into, or withdraw fluids from, the body.
Technical specifications:-
Syringe capacity: 1ml
Syringe graduation: Graduated scale on the barrel, easy to read. Scale intervals of 0.05ml. Graduation lines of 0.1ml volume increment.
Contact Science Lab for your Educational School Science Lab Equipments. We are best mathematics lab equipments suppliers, mathematics lab kit, mathematics lab kits india, maths kits ,maths lab equipment manufacturers in india, maths lab equipment suppliers.
Syringe, Disposable, 10ml, W/ndl, 21G
General Description:-
Syringe, 10ml, sterile, with bi-packed needle, 21G (0.80 x 38-40mm), disposable.
Technical Specifications:-
Syringe, two pieces: barrel with Luer nozzle and piston or three pieces barrel with luer nozzle, piston and stopper.Capacity: 10ml.
Needle with base (conical Luer type fitting) and protecting cap.
Material: Needle: stainless steel; base and protecting cap: plastic.
Disposable.
Sterile.
Graduated scale on the barrel, with scale interval of 0.5 and 1.0ml increment between graduation lines to be numbered
Barrel sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles.
Concentric or eccentric luer nozzle.
Material: Polyethylene (PEF) or polypropylene (PP)
Contact Science Lab for your Educational School Science Lab Equipments. We are best maths lab equipments manufacturers, maths lab kit india, maths lab kit suppliers, maths lab kits manufacturers, metal testing equipments, physics lab educational equipments.
Needle, Disposable, 23G, Sterile
Technical specifications:-
Material: Needle: Stainless steel
Base and protective cap: medical grade plastic.
Measurements: External diameter expressed in Gauge and millimetres.
Length expressed in inch and millimetres.
Size selected: 23Gx1” (0.6x25mm).
Disposable.
Contact Science Lab for your Educational School Science Lab Equipments. We are best physics lab equipment supplier, physics lab equipment suppliers in ambala, physics lab equipments manufacturers, physics lab equipments suppliers, physics labware, school educational equipments.
Needle, Disposable, 19G, Sterile
General Description:-
Needle with base (Luer type fitting), and protective cap.
Intended use: inject fluids into, or withdraw fluids from, parts of the body below the surface of the skin
Technical specifications:-
Material: Needle: Stainless steel
Base and protective cap: medical grade plastic.
Measurements: External diameter expressed in Gauge and millimetres.
Contact Science Lab for your Educational School Science Lab Equipments. We are best school lab equipments supplier, school lab export, school lab exporter, school laboratory equipment manufacturers, school laboratory equipment suppliers, school science equipments.
Lancet, Blood, Sterile, Disposable
Technical Specifications:-
Sturdy, ready to use manual blood lancet
Sharp point, all sides tapered provides quick, clean puncture ribbed surface for firm grip
Typical incision depth, approximately 2mm
Single use
Dimensions:-
Length, approximately 40mm
Width, approximately 6mm
Thickness, approximately 0.05mm
Sterile individually packed
Material: Chrome-polished stainless steel
Initial sterilisation method: Ethylene oxide gas or Gamma radiation
Contact Science Lab for your Educational School Science Lab Equipments. We are best school science equipments suppliers, school science kits, school science lab equipment exporter, school science lab equipment manufacturer, school science lab equipment supplier, school science lab equipment suppliers.
Infusion Giving Set, Sterile
Device components:-
Perforator: Sharp piercing device with protective cap.
Air inlet: With integrated bacteriological filter.
Drop counting chamber: Transparent drip chamber, calibrated at 20 drops/ml, with 15-20μm fluid filter.
Tubing: Transparent tubing, minimum length 150cm, with injection site latex or latex-free (or Y-injection port), with distal connector preferably Luer Lock connector.
Precision flow regulator: Smooth roller clamp to facilitate easy, safe control and adjustment of fluid rates.
General Description: :-
Infusion giving set, sterile, single use
Technical Specifications:-
Sterile single use device used for parenteral administration of infusions (IV fluids) by gravity.
Sterile
Single use
Contact Science Lab for your Educational School Science Lab Equipments. We are best school science lab equipment suppliers in india, school science lab equipments exporter, school science lab equipments manufacturers,school science lab equipments manufacturer, school science lab equipments supplier, school science lab equipments suppliers.
Infusion Giving Set, W/Burette, Sterile
General Description:-
Infusion giving set, with burette, sterile, single use
Technical Specifications:-
Sterile IV giving set with graduated chamber (burette) enabling precise volume and slow administration of infusion or injectable medicine.
Tube: plastic (PVC: polyvinyl chloride). Transparent (allowing the detection of air bubbles). Resistant to kinking.
Length is approximately 150cm (overall IV giving set length approximately 170cm). Internal / external diameter is approximately 3mm / 4mm.
Plastic Perforator: plastic (polyacetate).
Hollow device located at the proximal end of the infusion set allowing it to be connected to the infusion bottle or bag. Composed of a tapering tube mounted on a base ensuring a good seal between the set and the infusion bottle or bag.
Fitted with a protecting cap.
Located under the graduated chamber. Calibrated 60 drops/ml. Fitted with a 15µ polyamide filter.
Flow regulator: plastic (ABS: acrylonitrile butadiene styrene).
Ensures the flow regularity during the IV administration.
Injection portal: plastic (ABS: acrylonitrile butadiene styrene)+ synthetic rubber.
Allows introducing precise volume of injectable medicines into the infusion flow.
Terminal connection (stopper): plastic (ABS: acrylonitrile butadiene styrene).
Air inlet: plastic (ABS: acrylonitrile butadiene styrene)
Incorporated into the perforator. Fitted with an air filter (bacteriological filter).
Graduated chamber (burette): plastic (PS: polystyrene).
Transparent. Capacity: approximately 100-150ml. Graduations every ml. Connected to the perforator by a tube (approximatey 15cm).
Security gauge:
Automatic shut off valve, to stop the infusion as soon as the pre-set volume has flown away in order to prevent air entering the drop-counting chamber and/or the tube.
Drop-counting chamber:
With Luer lock connector.
Single use.
Sterile.
Contact Science Lab for your Educational School Science Lab Equipments. We are best school science lab equipments suppliers in india, school science lab instruments, school science lab instruments exporter, school science lab instruments manufacturer, school scientific equipments, science educational equipment.
Syringe, Disposable, 5ml, Sterile
Technical specifications:-
Syringe capacity: 5ml
Syringe graduation: Graduated scale on the barrel, easy to read. Scale intervals of 0.2 or 0.5ml. Graduation lines of 1.0ml volume.
Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS).
Syringe: Disposable.
Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles.
Barrel Nozzle: Luer lock or luer slip. The Luer nozzle shall be situated centrally.
Contact Science Lab for your Educational School Science Lab Equipments. We are best science educational equipments, science educational instruments, science lab equipments manufacturer, science laboratory instruments exporter, scientific educational equipments, scientific educational lab equipment.
Needle, Disposable, 21G, Sterile
Technical specifications:-
Material: Needle: Stainless steel
Base and protective cap: medical grade plastic.
Measurements: External diameter expressed in Gauge and millimetres.
Disposable.
Sterile, (ethylene oxide sterilisation)
Length expressed in inch and millimetres.
Size selected: 21Gx1 1/2” (0.8x40mm).
Colour code: visible at the base of the needle
Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific educational lab equipments, scientific equipments manufacturers, scientific lab equipment manufacturers, scientific lab plasticware, scientific laboratory equipment manufacturer, scientific laboratory equipment supplier
